Scribd
Upload
55 views

MTS, MTO, ATO, CTO, ETO Strategies To Connect Sales With Production

The document discusses various strategies for connecting sales and production departments, including Make-To-Stock (MTS), Make-To-Order (MTO), Assemble-To-Order (ATO), Configure-To-Order (CTO), and Engineer-To-Order (ETO). MTS involves producing items based on forecasts before orders are received. MTO produces standard items only after orders are received. ATO stocks some components and finishes assembly of standard products after orders. CTO uses configuration to create variations of a standard product. ETO is for complex, customized projects that have never been produced before. The strategies aim to fulfill customer demands while minimizing waste, but disconnects can occur between sales and production goals and planning

Uploaded by

Fernando William Rivera Cuadros
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
55 views

MTS, MTO, ATO, CTO, ETO Strategies To Connect Sales With Production

The document discusses various strategies for connecting sales and production departments, including Make-To-Stock (MTS), Make-To-Order (MTO), Assemble-To-Order (ATO), Configure-To-Order (CTO), and Engineer-To-Order (ETO). MTS involves producing items based on forecasts before orders are received. MTO produces standard items only after orders are received. ATO stocks some components and finishes assembly of standard products after orders. CTO uses configuration to create variations of a standard product. ETO is for complex, customized projects that have never been produced before. The strategies aim to fulfill customer demands while minimizing waste, but disconnects can occur between sales and production goals and planning

Uploaded by

Fernando William Rivera Cuadros
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

MTS, MTO, ATO, CTO, ETO Strategies to connect Sales with Production

Posted by Uwe Goehring in SAP ERP Manufacturing - Production Planning (SAP PP) on Jul 6, 2012 11:02:37 AM
inShare

The interface between the Sales and Production departments is a critical one. Very often the two departments work in silos. All strategies discussed here, are at the crossroads between demand and supply. It is a goal to be agile and fulfill every customers wish on time and on quantity, but it is also important to minimize waste and enable smooth replenishment and production. Proper use of the planning strategy helps achieving both goals. A big problem, one that I encounter a lot, is that products are not optimally set up for either one of these strategies. Either the wrong assignment happens, or Production has a different idea than Sales, about what the product assignment should be. Additionally there is the need to periodically analyze the product portfolio because whats MTO today might be MTS tomorrow. The ultimate achievement, one that both Production and Sales strive for, is to have the right product at the right place in the right quantity at the right time. Planning strategies are one of the most important drivers to achieve exactly that.

Make To Stock Planning


When your product is a commodity that can be sold out of a catalog and is defined and specified through a master record, it can be planned; if it is somewhat predictable. A steady consumption in the past helps predicting the future, however, there may be events in the future which require a more forward-looking planning process. In any case, if you can somewhat predict what will happen, you may consider a Make To Stock strategy. Even if it is hard to predict the future, but the customer does not accept long delivery times, you might be required to make some of your product to stock. Making to stock means production without actual requirements. The Sales Order does not drive the production program but the forecast does. Incoming Sales Orders use existing inventory for the delivery which keeps the customer lead time to a minimum. Once your product is identified as a Make To Stock the availability check in the Sales Order must look for inventory and not place additional load in the production program. If there is no stock your service level degrades and the customer needs to wait for the next receipt from production. Disconnect between Sales and Production #1: the customer is king paradigm does not have any validity in an MTS scenario. If you want to make the customer the king you need to make your product to that customers order.

Make To Order Production


This strategy still is for standard products which have a clearly defined specification. Other than MTS, there is absolutely no forecast on products which are made to an order from a customer. You start production after the customers request comes in and not, like with MTS, beforehand. When you identify a product to be made to order, the availability check in the Sales Order needs a lead time; the time it takes to replenish or produce the product from soup to nuts. Therefore when a customer requests the item, no freely available stock to fulfill the order can be found. Everything is made from scratch and takes its time. Disconnect between Sales and Production #2: You cannot plan for a 100% (or more!) utilization on the production line and allow for the free flow of orders, which were set to MTO, into the production schedule. All too often there is pressure to fully utilize the line; and that can only be done with orders resulting from a forecast. If MTS fills the line and MTO orders drop on top, they fall into backlog and the quoted lead time to the customer is a farce.

Assemble To Order or Finish To Order with placement of the Inventory/Order interface


This type of strategy allows for a placement of a stocking point, the inventory/order interface, at the most effective spot in the product structure. What this means is that you can decide at what point in the BoM, material is kept in stock readily available for further processing. Therefore upstream of the inventory/order interface we are making to stock and downstream from it we are pulling to order. This also means that downstream from the I/O interface we have lead time to the customer whereas the availability check does not need to consider time for the processes upstream from the I/O interface. ATO provides flexibility, speed and helps reduce waste. Other people would say its agile and lean at the same time.

Disconnect between Sales and Production #3: Assembly strategies have the capability to generate a production order to assemble the finished product right out of the sales order. As this happens, the system can also check on component availability and if there is a shortage, it can provide a reasonable date for when the finished product can be delivered. If that date is not fixed, and I have not seen a Sales person fix a date yet, production scheduling is burdened with a demand for today and tomorrow for tomorrow and so on and so forth. Please take a moment to think about what is done here: the Sales Rep agrees a date with the Customer who would be quite happy to get the product on that date in the future. However, that same Sales Rep tells the Production people that the product needs to be available right away. Consider how many orders there are and that this pressure pops up every day from now on until the order is delivered, you can easily see that there is room for improvement in the communication department.

Configure To Order
When a standard product has variations in its specification, one needs to answer the question whether to create a material master record number for every variation or to make use of the variant Configurator. In case the VC is used, an underlying structure will have to be build, which allows you to configure a variation of one (configurable) material number based on features and options. The underlying structure has optional values and characteristics that have dependencies and limitations. Be cautious to know that In the same way that there is a line where it becomes more efficient to use options and characteristics to build a spec, there is also a line where it becomes more feasible to use a whole new project to build a complex product which has never been built before; or in other words: to build the underlying structure with features and options and dependencies becomes far too complex. So there is an upper limit as well as a lower limit in complexity where Configure To Order has its right to exist. Configure To Order is a strategy that closely resembles MTO or ATO for the finished product and components can be made to stock using a forecast based on probability factors maintained for options and features.

Engineer To Order
The Variant Configurator most always fails when that fine line was crossed where ETO should have taken over! It is not the lack of functionality and features of the VC which make it fail, it is mostly that the VC is used for a structure where projects and work breakdown structures would much better suit the handling of the complex product or structure in question. Engineer To Order is used when complex structures are build. In most cases these projects organize many tasks and follow a long timeline to produce large, highly customized products to specific customer specifications. The finished product, and also many components and subassemblies, have never been built before and receive brand new product codes. Work Breakdown Structures and Projects are used to structure and manage the procurement of long lead-time purchased parts, the dependencies in production and procurement and cost and timely delivery of the final product. All of these strategies have many variations. What was discussed above is just a generic description. A more detailed discussion is to be had around SAP planning strategies where there are countless combinations and opportunities. so here is a summary of my view on these strategies on a very generic level. MTS: standard product made to a forecast before any committed orders come in MTO: standard products not held in inventory and made after a committed order comes in ATO: standard product where some components are held in stock and the finished product is finished after the order comes in CTO: The standard product has variations; as many as not to justify the creation of a part number for every variation but not as many as to make the underlying structure too complex to handle ETO: complex structures and customer specified projects which were never built before and make it impossible to be handled with standard variations

You might also like