Scribd
Upload
143 views2 pages

Rosenberger 19K132-K00D3 ADAPTOR SMP JACK - SMA JACK - TECHNICAL DATA SHEET

This technical data sheet provides specifications for an SMP jack to SMA jack adapter. The adapter connects interfaces that comply with SMP and SMA standards, and is constructed of materials like beryllium copper and stainless steel. It has electrical properties such as impedance up to 26.5 GHz and return loss down to -35 dB. The adapter also has mechanical properties like engagement force between 2.2-9 N and operates in temperature ranges from -65 to 155 degrees Celsius.

Uploaded by

dajones.eng
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
143 views2 pages

Rosenberger 19K132-K00D3 ADAPTOR SMP JACK - SMA JACK - TECHNICAL DATA SHEET

This technical data sheet provides specifications for an SMP jack to SMA jack adapter. The adapter connects interfaces that comply with SMP and SMA standards, and is constructed of materials like beryllium copper and stainless steel. It has electrical properties such as impedance up to 26.5 GHz and return loss down to -35 dB. The adapter also has mechanical properties like engagement force between 2.2-9 N and operates in temperature ranges from -65 to 155 degrees Celsius.

Uploaded by

dajones.eng
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TECHNICAL DATA SHEET ADAPTOR SMP JACK SMA JACK

19K132-K00D3

All dimensions are in mm; tolerances acc. ISO 2768 m-H

Interface
According to SMP side: SMA side: MIL-STD-348A, Fig. 326 IEC 60169-15; EN 122110; MIL-STD-348A, Fig. 310

Documents
N/A

Material and plating


Connector parts Center contact Outer contact SMP side Outer contact SMA side Dielectric Material Beryllium copper Beryllium copper Stainless steel PTFE Plating Gold, min. 0.8 m, over chemical nickel Gold, min. 1.27 m, over chemical nickel Passivated

RF_35/12.04/3.0

Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de

Tel.: +49 8684 18-0 Fax: +49 8684 18-499 email: [email protected]

Page 1/2

TECHNICAL DATA SHEET ADAPTOR SMP JACK SMA JACK


Electrical data
Impedance Frequency Return loss 50 DC to 26.5 GHz 35 dB, DC to 4 GHz 26 dB, 4 to 10 GHz 18 dB, 10 to 18 GHz 0.05 x f(GHz) dB, DC to 18 GHz 5 G 6.0 m, SMP side; 3 m, SMA side 2.0 m, SMP side; 2 m, SMA side 500 V rms 335 V rms 1.2A DC max. SMP side 1000 500 100 27 N SMA side min. 500

19K132-K00D3

Insertion loss Insulation resistance Center contact resistance Outer contact resistance Test voltage Working voltage Contact Current

Mechanical data
Mating cycles if mating part is smooth bore if mating part is limited detent if mating part is full detent Center contact captivation: axial Engagement force - smooth bore - limited detent - full detent Disengagement force - smooth bore - limited detent - full detent Coupling test torque Recommended torque

9 N max. 45 N max. 68 N max. 2.2 N min. 9 N min. 22 N min. N/A N/A -65C to +155C MIL-STD-202, Method MIL-STD-202, Method MIL-STD-202, Method MIL-STD-202, Method compliant N/A N/A 1 pce in bag 4.6 g/pce

27 N N/A

N/A

max. 1.7 Nm 0.8 Nm to 1.1 Nm

Environmental data
Temperature range Thermal shock Vibration Shock Moisture resistance 2002/95/EC (RoHS) 107, Condition B 204, Condition B 213, Condition A 106

Tooling Suitable cables Packing


Standard Weight

While the information has been carefully compiled to the best of our knowledge, nothing is intended as representation or warranty on our part and no statement herein shall be construed as recommendation to infringe existing patents. In the effort to improve our products, we reserve the right to make changes judged to be necessary.

RF_35/12.04/3.0

Draft Inge Mhlauer

Date 17/08/04

Approved Krautenbacher J.

Date 26/09/06

Rev. b00

Engineering change number 06-0478

Name B. Dandl

Date 26/09/06

Rosenberger Hochfrequenztechnik GmbH & Co. KG P.O.Box 1260 D-84526 Tittmoning Germany www.rosenberger.de

Tel.: +49 8684 18-0 Fax: +49 8684 18-499 email: [email protected]

Page 2/2

You might also like