Scribd
Upload
175 views

Using Standard AccuMark PE Test Data

This document provides instructions for using the standard AccuMark Professional Edition version 7 test data to check the AccuMark system. It describes how to display a piece, order and retrieve a marker, select and slide pieces in marker making, and plot a marker. The instructions include launching various AccuMark tools from the LaunchPad menu and performing actions like opening files, processing orders, selecting pieces, and sending markers to a configured plotter.

Uploaded by

Dora BA
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
175 views

Using Standard AccuMark PE Test Data

This document provides instructions for using the standard AccuMark Professional Edition version 7 test data to check the AccuMark system. It describes how to display a piece, order and retrieve a marker, select and slide pieces in marker making, and plot a marker. The instructions include launching various AccuMark tools from the LaunchPad menu and performing actions like opening files, processing orders, selecting pieces, and sending markers to a configured plotter.

Uploaded by

Dora BA
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Using Standard AccuMark PE Test Data

This section describes the procedures for checking the AccuMark Professional Edition system by using the standard version 7 test data which is installed in the DATA70 storage area. The DATA70 storage area will automatically be installed during a typical installation if no other storage area by that name exists, and may be optionally overwritten if the storage area already exists. It is recommended for users to create their own storage areas to contain their data (do not use storage area names DATA70, GTBASICS, or SIL2000). These areas should only be used for training or testing purposes. DISPLAY A PIECE 1. From the LaunchPad menu select AccuMark Explorer 2. Select LADIES-BLOUSE-BK and open it in Pattern Design. 3. Bring piece into the work area and select View/Grades sizes. 4. Press right mouse button or cancel functions. 5. Exit Pattern Design. ORDER A MARKER 1. From the LaunchPad menu select the Marker Creation, Editors page and 2. click on the Order Icon or, open AccuMark Explorer. 3. From the Order form select File Open and select TESTMARKER. 4. Press the green arrow key or select File - PROCESS. 5. The message "Processing order: TESTMARKER" should now display on the screen. When the order has finished processing, the message "Processed Successfully should display. RETRIEVING A MARKER 1. From the LaunchPad menu select the Marker Creation, Editors page and 2. click on the Marker Making Icon or, open AccuMark Explorer. 3. From the File Menu select Open. 4. Two marker names will be displayed: 5. TESTMARKER an unmade marker (created by ORDER A MARKER above) 6. LADIES-BLOUSE a made marker 7. To select a marker from the list, highlight the marker name using the mouse, and select Open. SELECTING AND SLIDING PIECES IN MARKER MAKING 1. Move the mouse cursor over the numbers below the pieces in the icon menu. The piece count will highlight and the associated piece name and size will display in the status bar. 2. Select using the left mouse button. 3. When a piece is selected, the perimeter will become dotted and the piece will attach to the mouse cursor. 4. To slide the piece into the marker, press and hold the left mouse button and draw a vector in the direction desired. Release the mouse button. 5. The piece will move in the direction of the slide vector. If the piece fits into the area where it was slid, it will place. PLOTTING A MARKER 1. Use the Hardware Configuration icon to configure a plotter. Then from the LaunchPad menu select the Plotting and Cutting page or, open AccuMark Explorer. 2. From the LaunchPad options select the MARKER PLOT icon. 3. Select the location as Data70. In the marker name field select LADIES-BLOUSE. 4. From AccuMark Explorer, right-click on the marker LADIES-BLOUSE and select Send To Plotter. 5. Press the green arrow or select PROCESS ALL from the File drop down menu. 6. Note: AutoProcess is turned off by default enabling the plot form to display. If the plot form does not appear, check the Plot Options. 7. If the plotter is online and properly configured it will begin plotting.

You might also like