DE114

Windows 8 BIOS Boot settings

The Windows 8 BIOS boot settings allow you to configure the new items of boot options for systems running in Windows 8 operating system.
UEFI BIOS Utility - Advanced Mode
Exit

Main

Ai Tweaker

Advanced

Monitor

Boot

Tool

Boot Configuration Fast Boot USB Support PS/2 Keyboard and Mouse Support Network Stack Driver Support Next Boot after AC Power Loss DirectKey Full Screen Logo POST Delay Time Bootup NumLock State Wait for F1 If Error Option ROM Messages Setup Mode > CSM (Compatibility Support Module > Secure Boot Enabled Partial In... Disabled Disabled Normal Boot [Go to BIOS...] Enabled 3 sec On Enabled Force BIOS EZ Mode

Select [Enable] to accelerate the boot speed. Select [Disable] to go back to normal boot.

: Select Screen : Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Shortcut F5: Optimized Defaults F0: Save ESC: Exit F12: Print Screen

Version 2.00.1208. Copyright (C) 2012 American Megatrends, Inc.

Fast Boot [Enabled]

Select to accelerate the boot speed. Select to go back to normal boot.

The following four items appear when you set Fast Boot to [Enabled].

USB Support [Partial Initialization] [Disabled] [Full Initialization] [Partial Initialization] All USB devices will not be available until OS boot up for a fastest POST time. All USB devices will be available during POST. This process will extend the POST time. For a faster POST time, only the USB ports with keyboard and mouse connections will be detected.

Windows 8 BIOS Boot Settings

Select any of these settings when PS/2 keyboard and mouse are installed. These settings only apply when Fast Boot is enabled. [Auto] For a faster POST time, PS/2 devices will only be available when the system boots up or rebooted when the PS/2 devices have not been reconnected or changed. If you disconnect or change PS/2 devices before restarting the system, PS/2 devices will not be available and BIOS setup program will not be accessible via PS/2 devices.

PS/2 Keyboard and Mouse Support [Auto]

[Full Initialization] For full system control, PS/2 devices will be available during POST at any circumstances. This process will extend POST time. [Disabled] For the fastest POST time, all PS/2 devices will not be available until your computer enters the operating system.

[Disabled] [Enabled]

Network Stack Driver Support [Disabled]

Select to skip the network stack driver from loading during POST. Select to load the network stack driver during POST.

[Normal Boot] [Fast Boot] [Disabled]

Next Boot after AC Power Loss [Normal Boot]

Returns to normal boot on the next boot after AC power loss.

Accelerates the boot speed on the next boot after AC power loss. Disables the DirectKey function. The system will only power on or off when you press the DirectKey button. Allows the system to power on and go to BIOS Setup directly when you press the DirectKey button.

DirectKey [Go to BIOS...]

Full Screen Logo [Enabled]

Enables the full screen logo display feature.

Disables the full screen logo display feature.

This item appears only when you set Full Screen Lgo to [Enabled]. This item allows you to select the desired additional POST waiting time to easily enter the BIOS setup. You can only execute the POST delay time during Normal Boot. The values range from 1 to 10 seconds.
This feature will only work under normal boot.

POST Delay Time [3 sec]

This item appears only when you set Full Screen Logo to [Disabled]. This item allows you to select a desired post report waiting time. The values range from 1 to 10 seconds.

Post Report [5 sec]

Windows 8 BIOS Boot Settings

CSM (Compatibility Support Module)

Allows you to configure the CSM (Compatibility Support Module) items to fully support the various VGA, bootable devices and add-on devices for better compatibility. [Auto] Launch CSM [Auto] The system automatically detects the bootable devices and the addon devices.

[Enabled] [Disabled]

For better compatibility, enable the CSM to fully support the non-UEFI driver add-on devices or the Windows UEFI mode. Disable the CSM to fully support the Windows Security Update and Security Boot.

The following four items appear when you set Launch CSM to [Enabled].

Boot Devices Control [UEFI and Legacy OpROM] Allows you to select the type of devices that you want to boot up. Configuration options: [UEFI and Legacy OpROM] [Legacy OpROM only] [UEFI only Boot from Network Devices [Legacy OpROM first] Allows you to select the type of network devices that you want to launch. Configuration options: [Legacy OpROM first] [UEFI driver first] [Ignore] Boot from Storage Devices [Legacy OpROM first] Allows you to select the type of storage devices that you want to launch. Configuration options: [Both, Legacy OpROM first] [Both, UEFI first] [Legacy OpROM first] [UEFI driver first] [Ignore]

Boot from PCIe/PCI Expansion Devices [Legacy OpROM first] Allows you to select the type of PCIe/PCI expansion devices that you want to launch. Configuration options: [Legacy OpROM first] [UEFI driver first]

Windows 8 BIOS Boot Settings

Secure Boot

Allows you to configure the Windows Secure Boot settings and manage its keys to protect the system from unauthorized access and malwares during POST. Allows you to select your installed operating system. [Windows UEFI mode] Executes the Microsoft Secure Boot check. Only select this option when booting on Windows UEFI mode or other Microsoft Secure Boot compliant OS. Get the optimized function when booting on Windows non-UEFI mode, Windows Vista/XP, or other Microsoft Secure Boot non-compliant OS. Microsoft Secure Boot only supports Windows UEFI mode. OS Type [Windows UEFI mode]

[Other OS]

Allows you to select how the Secure Boot prevents unauthorized firmware, operating systems, or UEFI drivers from running during boot time. [Standard] Allows the system to automatically load the Secure Boot keys from the BIOS database. [Custom]

Secure Boot Mode [Standard]

Allows you to customize the Secure Boot settings and manually load its keys from the BIOS database.

This item only appears when you set OS Type item to [Windows UEFI mode]

This item appears only when you set Secure Boot Mode to [Custom]. It allows you to manage the Secure Boot keys. Manage the Secure Boot Keys (PK, KEK, db, dbx)

Key Management

Install Default Secure Boot keys Allows you to immediately load the default Security Boot keys, Platform key (PK), Key-exchange Key (KEK), Signature database (db), and Revoked Signatures (dbx). The Platform Key (PK) state will change from Unloaded mode to Loaded mode. The settings are applied after reboot or at the next reboot.

Key-exchange Key (KEK) refers to Microsoft Secure Boot Key database (KEK).

Clear Secure Boot keys This item appears only when you load the default Secure Boot keys. This item allows you to clear all default Secure Boot keys.

Windows 8 BIOS Boot Settings

The Platform Key (PK) locks and secures the firmware from any permissible changes. The system verifies the PK before your system enters the OS. Load PK from File Allows you to load the downloaded PK from a USB storage device.

PK Management

Copy PK to File Allows you to store the PK to a USB storage device.

Delete PK Allows you to delete the PK from your system. Once the PK is deleted, all the systems Secure Boot keys will not be active. Configuration options: [Yes] [No]
The PK file must be formatted as a UEFI variable structure with time-based authenticated variable.

The KEK (Key-exchange Key or Key Enrollment Key) manages the Signature database (db) and Revoked Signature database (dbx).
Key-exchange Key (KEK) refers to Microsoft Secure Boot Key-Enrollment Key (KEK).

KEK Management

Load KEK from File Allows you to load the downloaded KEK from a USB storage device. Copy KEK to File Allows you to store the KEK to a USB storage device. Append KEK from file Allows you to load the additional KEK from a storage device for an additional db and dbx loaded management. Delete the KEK Allows you to delete the KEK from your system. Configuration options: [Yes] [No]

The KEK file must be formatted as a UEFI variable structure with time-based authenticated variable.

The db (Authorized Signature database) lists the signers or images of UEFI applications, operating system loaders, and UEFI drivers that you can load on the single computer. Load db from File Allows you to load the downloaded db from a USB storage device.

db Management

Copy db from file Allows you to store the db to a USB storage device.

Windows 8 BIOS Boot Settings

Append db from file Allows you to load the additional db from a storage device so that more images can be loaded securely. Delete the db Allows you to delete the db file from your system. Configuration options: [Yes] [No]

The db file must be formatted as a UEFI variable structure with time-based authenticated variable.

The dbx (Revoked Signature database) lists the forbidden images of db items that are no longer trusted and cannot be loaded. Load dbx from File Allows you to load the downloaded dbx from a USB storage device.

dbx Management

Copy dbx from file Allows you to store the dbx to a USB storage device.

Append dbx from file Allows you to load the additional dbx from a storage device so that more dbs images cannot be loaded. Delete the dbx Allows you to delete the dbx file from your system. Configuration options: [Yes] [No]

The dbx file must be formatted as a UEFI variable structure with time-based authenticated variable.

Windows 8 BIOS Boot Settings