IBM InfoSphere DataStage and QualityStage

Version 8 Release 5

Administrator Client Guide

SC18-9895-02

IBM InfoSphere DataStage and QualityStage

Version 8 Release 5

Administrator Client Guide

SC18-9895-02

Note Before using this information and the product that it supports, read the information in Notices and trademarks on page 37.

Copyright IBM Corporation 1997, 2010. US Government Users Restricted Rights Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.

Contents
Chapter 1. What is the Administrator client? . . . . . . . . . . . . . . . 1
Who can use the Administrator? . . . . . . . What can you do from the Administrator client? . . 1 . 1 Specifying a scheduling user. . . . . Supplying mainframe information . . . Tunables page . . . . . . . . . Hashed file caching. . . . . . . Row buffering . . . . . . . . Parallel page . . . . . . . . . . Sequence page . . . . . . . . . Remote page . . . . . . . . . . Deploying on USS systems . . . . Deploying on remote systems . . . Logs page . . . . . . . . . . . Purging job log files . . . . . . Enabling operational repository logging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 17 19 19 19 20 20 21 21 23 23 24 24

Chapter 2. Using the Administrator client . . . . . . . . . . . . . . . . 3

Starting the Administrator client . . . . . . Description of the Administrator client . . . Setting the InfoSphere Information Server engine timeout . . . . . . . . . . . . . . Issuing InfoSphere Information Server engine commands . . . . . . . . . . . . . . . . . . 3 . 3 . 3 . 4

Chapter 3. Administering projects

Adding projects . Deleting projects . Moving projects . Moving a project . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . 7
. . . . . . . . . . . . 7 8 8 8

Chapter 5. Configuring projects for NLS . . . . . . . . . . . . . . . . 27

Changing project maps . Server job project maps Parallel job project maps Changing project locales . Server job locales . . Parallel job locales . . Client and server maps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 27 28 28 28 29 29

Chapter 4. Setting project properties . . 11

General page . . . . . . . . . . . . . . Enabling job administration in the Director client Enable runtime column propagation for parallel jobs . . . . . . . . . . . . . . . . Enabling editing of internal reference information Controlling the import of metadata from connectors . . . . . . . . . . . . . . Protecting a project . . . . . . . . . . . Setting environment variables . . . . . . . Enabling operational metadata at the project level (parallel and server jobs) . . . . . . . . . Permissions page . . . . . . . . . . . . InfoSphere DataStage user roles . . . . . . Assigning InfoSphere DataStage user roles . . . Changing the operator's view of job log entries Enabling tracing on the InfoSphere Information Server engine . . . . . . . . . . . . . . 11 11 12 12 13 13 13 14 14 15 16 16 16

Product accessibility

. . . . . . . . 31

Accessing product documentation. . . 33 Links to non-IBM Web sites. . . . . . 35 Notices and trademarks . . . . . . . 37 Contacting IBM . . . . . . . . . . . 41 Index . . . . . . . . . . . . . . . 43

Copyright IBM Corp. 1997, 2010

iii

iv

Administrator Client Guide

Chapter 1. What is the Administrator client?

You use the IBM InfoSphere DataStage Administrator client to perform administrative tasks for individual projects located on a single InfoSphere DataStage The Administrator client exists in parallel with the web client-based Suite Administrator. You can open the Suite Administrator from within the Administrator by clicking on the Suite Admin hyperlink.

Who can use the Administrator?

To use all the features of the Administrator client, you need to have been set up as a Administrator within the Suite Administrator. (If you have been set up as an InfoSphere DataStage user you can open the Administrator and view information and perform certain non-administrative functions.)

What can you do from the Administrator client?

The Administrator client allows you to perform the following tasks: v Add, delete, and move InfoSphere DataStage projects (see "Project Administration") v Set up user permissions for projects (see "Project Properties") v Purge job log files (see "Project Properties") v Set the timeout interval on the InfoSphere DataStage engine (see "Using the Administrator") v Trace InfoSphere Information Server engine activity (see "Project Properties") v Set job parameter defaults (see "Project Properties") v Issue InfoSphere Information Server engine commands from the Administration client (see "Using the Administrator") v Check license details (see "Using the Administrator") All of these tasks relate to a particular InfoSphere Information Server engine installation.

Copyright IBM Corp. 1997, 2010

Administrator Client Guide

Chapter 2. Using the Administrator client

These topics tell you how to start the Administrator, how to perform basic tasks and refers you to other topics for more detailed descriptions of advanced tasks.

Starting the Administrator client

To start the Administrator client: 1. From the start menu, choose IBM InfoSphere Information Server IBM InfoSphere DataStage and QualityStage Administrator. 2. Specify the host name for the services tier that the InfoSphere Information Server engine you want to administer belongs to. 3. Select the host name for the computer where the InfoSphere Information Server engine you want to administer resides. 4. Specify a User name and Password for connecting to the specified domain. To use all the Administrator client functions, you must already have been specified as a DataStage Administrator in the Administration tab of the Web console. 5. Click OK.

Description of the Administrator client

The Administrator has three tabbed pages: v Use the General page to set engine-wide properties. This page is enabled only when at least one project exists. The engine wide properties are: Inactivity Timeout (see "Setting the InfoSphere Information Server Engine Timeout" ). NLS client/server map (if NLS is enabled on this system) (see "Client/Server Maps"). v The Projects page lists all the InfoSphere DataStage projects currently known to the InfoSphere Information Server engine. Use this page to administer projects. From here you can: Add and delete projects (see "Project Administration.") View and set project properties (see "Project Properties") Change the default character set maps and locales for projects (if NLS is enabled) (see "NLS Configuration.") Issue InfoSphere Information Server engine commands directly to the project (see "Issuing InfoSphere Information Server Engine Commands"). If no projects exist, only the Add... and Command buttons are enabled, and Command issues InfoSphere Information Server engine commands on the InfoSphere Information Server engine account.

Setting the InfoSphere Information Server engine timeout

By default, the connection between the InfoSphere DataStage client and InfoSphere Information Server engine on Windows times out after 86400 seconds (24 hours) inactivity. By default, the connection between the InfoSphere DataStage client and InfoSphere Information Server engine on UNIX does not time out.
Copyright IBM Corp. 1997, 2010

To change the default: 1. In the Administrator window, click the General tab to move the General page to the front. 2. In the Inactivity Timeout area, use the up and down buttons to change the timeout period, or enter the new timeout period in the seconds field. 3. To disable inactivity timeout, select the Do not timeout check box. 4. Click Apply to apply the new settings. The changes take effect immediately for any new client connections. If inactivity timeout is already disabled when the Administrator starts, the timeout reverts to the 86400-second default when you reenable it. The timeout also affects the dsjob -wait command issued from the command line and the job control api function DSWaitForJob. If you are using these features you are advised to set a long timeout, or disable the timeout altogether. It also affects shared containers on the parallel canvas (which use DSWaitForJob). The timeout set in the Administrator client overrides the session timeout set in the IBM InfoSphere Information Server Web console. Connections between InfoSphere DataStage clients and the engine are not affected by session timeouts set in the Web console.

Issuing InfoSphere Information Server engine commands

The Administration client lets you issue InfoSphere Information Server engine commands directly from a selected project rather than having to use a Telnet session. You cannot issue the following InfoSphere Information Server engine commands from the client: LOGOUT, LO, QUIT, Q, and OFF. You should take care when issuing InfoSphere Information Server engine commands that manipulate the NLS settings of your system. Incorrect use of these commands could disrupt both InfoSphere DataStage and the rest of your system. To issue an InfoSphere Information Server engine command from the Administration client: 1. Click the Projects tab in the DataStage Administration Window to move this page to the front. 2. Select the project. 3. Click Command. The Command Interface dialog box appears. 4. Either type the InfoSphere Information Server engine command you want to execute into the Command field, or double-click a command in the Command History list box. A command selected from the command history appears in the Command field, where you can edit it. 5. Click Execute. The command is added to the Command History list box and the Command Output window appears, displaying the results of the command. The command output pauses at the end of the first page. Click Next to scroll to the next page of output. If you want to switch paging off, clear the Pause output at end of page check box at the bottom of the Command Output dialog box.

Administrator Client Guide

6. If the command requires further input, the Command Output window displays a prompt. Enter the response in the field below the command output display, then click Respond. 7. When the command has run to completion, click Close. This window closes, and the Command Interface dialog box reappears. 8. If you want to save commands to the VOC file on the InfoSphere Information Server engine, select one or more commands from the Command History list box, then click Save As... . A single command is saved as a sentence and multiple commands as a paragraph. Enter the name of the sentence or paragraph in the Save As dialog box, then click OK. You cannot save a sentence or paragraph that contains a call to itself. 9. Click Close to close the Command Interface dialog box.

Chapter 2. Using the Administrator client

Administrator Client Guide

Chapter 3. Administering projects

These topics describe how to do the following: v Add new InfoSphere DataStage projects v Delete projects v Move projects When you delete InfoSphere DataStage projects, always do so through the Administrator client to ensure that licensing information is updated correctly.

Adding projects
You can add further projects from the Administrator client as required. When you add a new project, you can specify that the new project inherits users and their associated roles from an existing project. You can also specify that a new project is protected. This is a special category of project and, normally, nothing can be added, deleted or changed in the project. Users can view objects in the project, and perform tasks that affect the way a job runs rather than the jobs design; specifically they can: v Run jobs v Set job properties v Set job parameter default values A newly created protected project is populated by importing developed jobs and components; only a user with the Production Manager role or Administrator role can perform the import, no other types of user can import into a special project. (To mark an existing project as protected, use the Project Properties dialog box see "Protecting a Project" ). Protected projects provide a way of maintaining the integrity of jobs intended to be run in a `production' environment, that is, the finished jobs. Giving widespread access to the Production Manager role or Administrator role would obviate the benefits of using protected projects. In addition to having the InfoSphere DataStage administrator role in order to add a project, you also require the correct operating system permissions on the computer on which the InfoSphere Information Server engine you are administering resides. To add a new project: 1. Click the Projects tab in the Administrator window to move this page to the front. 2. Click the Add... button. The Add Project dialog box appears. 3. Enter the project name in the Name field. It is automatically appended to the default location for the new project. You cannot add a project to a location that already exists. 4. To change the default location, enter a new location in the Location on host field, or use the Browse... button to select a new location.

Copyright IBM Corp. 1997, 2010

5. If you want the project to be a protected one, select the Create protected projected check box. 6. If you want to copy the users who can access the new project, and their roles, from an existing project, select Copy roles from existing project, and select the project from which to copy from the list. 7. Click OK.

Deleting projects
To delete a project: 1. Ensure that no users are connected to the project you want to delete. InfoSphere DataStage returns an error message if you try to delete a project while another user is connected to it. 2. Click the Projects tab on the Administrator window to move this page to the front. 3. Select the project you want to delete, then click Delete. 4. You are prompted to confirm the deletion. If you confirm, the project is deleted immediately.

Moving projects
To move an InfoSphere DataStage project, you must export it to a file and then import it to the new location. You then need to delete the original project by using the Administrator client. Before attempting to move a project in this way, ensure that no one is running any jobs in it. The easiest way to do this is to start the InfoSphere DataStage Director, attaching to the project you want to move, and check whether any jobs are currently running. When you move projects, project level settings such as environment variable settings and project options are not included.

Moving a project
Move an InfoSphere DataStage project to a new location. 1. Start the Designer client, attaching to the project that you want to move. 2. Click Export DataStage Components from the main menu. The Repository Export dialog box appears. 3. Click the Select all hyperlink to select all the objects in the repository tree. 4. From the drop-down list, click Export job designs with executables (where applicable). 5. Click the Options button to open the Export Options dialog box. Specify the following under the Default General branch: v specify that source code is included with exported routines v specify that source code is included with job executables v specify that source content is included with data quality specifications 6. Select dsx as the Type of export. 7. Specify or select the file that you want to export to. If the file exists, you can click the View button to look at the file. The file is shown using either the

Administrator Client Guide

8. 9. 10. 11. 12. 13.

default viewer for this file type specified in Windows, or a viewer you have specified in the Export Options dialog box. Click Export to export the project to the specified file. Create a project with the required name in the location where you want to move the existing project to (see "Adding Projects" for instructions). Attach the Designer client to the new project you created. Click Import DataStage Components... . The DataStage Repository Import dialog box appears. Enter the file name you used for the exported project. Click the Import all option, then click OK. The project is imported.

Chapter 3. Administering projects

10

Administrator Client Guide

Chapter 4. Setting project properties

You can view and change particular project properties. To view and edit the properties of a project: 1. Click the Projects tab on the Administrator window to move the Projects page to the front. 2. Select the project. 3. Click the Properties button. The Project Properties window appears. You use the pages in the Project Properties window to do the following: v General. Enable job administration from the Director client, enable runtime column propagation for parallel jobs, define a project-wide setting for auto-purge of the job log, set up environment variables, enable the automatic sharing of metadata when importing by using the connector import wizard, and generate operational metadata. v Permissions. View and assign InfoSphere DataStage user roles to users and groups for a particular project. You assign suite user roles in the IBM InfoSphere Information Server Web console. v Tracing. Enable or disable tracing on the InfoSphere Information Server engine. v Schedule. Set up a user name and password to use for running scheduled InfoSphere DataStage jobs. The Schedule tab is enabled only if you have logged on to a Windows server. v Mainframe. Set mainframe job properties and the default platform type. This page is enabled only if mainframe edition is installed. v Tunables. Configure cache settings for Hashed File stages. v Parallel. Set parallel job properties and defaults for date/time and number formats. v Sequence. Set compilation defaults for job sequences. v Remote. If you have specified that parallel jobs in the project are to be deployed on a USS system, this page allows you to specify deployment mode and USS machine details.

General page
Use the General page to control a variety of features in the selected project.

Enabling job administration in the Director client

From the Administrator client, the administrator can enable or disable job administration features in the Director client. These features let InfoSphere DataStage operators release the resources of a job that has aborted or hung, and so return the job to a state in which it can be rerun when the cause of the problem has been fixed. The default is for these features to be disabled. To enable job administration in the Director: 1. Click the Projects tab in the Administrator window to move this page to the front.
Copyright IBM Corp. 1997, 2010

11

2. Select the project. 3. Click Properties. The Project Properties window appears, with the General page displayed. 4. Select the Enable job administration in Director check box. 5. Click OK. This procedure enables two commands in the Director Job menu: v Cleanup Resources v Clear Status File Cleanup Resources is also enabled in the Monitor window shortcut menu in the Director. Cleanup Resources lets the user: v View and end job processes v View and release the associated locks Cleanup Resources is not compatible with tracing (see "Enabling Tracing on the InfoSphere DataStage Engine"). If you enable tracing and job administration, the Director displays an error message when Cleanup Resources is chosen. Clear Status File removes the status records associated with all stages of the selected job. It should be used only if the user believes all the job processes have gone away and the job cannot be reset correctly. These two commands give the user considerable control over job resources, and should be used with care. Refer to InfoSphere DataStage Director Client Guide for full information about how to use these commands.

Enable runtime column propagation for parallel jobs

If you enable this feature, stages in parallel jobs can handle undefined columns that they encounter when the job is run, and propagate these columns through to the rest of the job. This check box enables the feature, to actually use it you need to explicitly select the option on each stage (see InfoSphere DataStage Parallel Job Developer Guide). Enabling this feature makes the following sub-property available: v Enable Runtime Column Propagation for new links. Select this to have runtime column propagation enabled by default when you add a new link in a InfoSphere DataStage job. If you do not select this, you will need to enable it for individual links in the stage editor when you are designing the job.

Enabling editing of internal reference information

Select Enable edition of internal references in jobs to enable the editing of the Table definition reference and Column definition reference fields in the column definitions of stage editors. These settings affect how stage editors behave in the Designer client. The two fields identify the table definition, and individual columns within that definition, that columns have been loaded from. These fields are enabled on the Stage Editor's Columns tab via the Grid Properties dialog box in the Designer client.

12

Administrator Client Guide

Controlling the import of metadata from connectors

Use the Share metadata when importing from Connectors option to specify what objects are created when you use the Designer client to import metadata via connectors. This option is selected by default. This means that when you use the Import Table Definitions Start Connector Import Wizard command in the Designer client a table definition object is created in the project and a data collection is created in the dynamic repository. Other suite components, and other DataStage projects, can then access the data collection in the dynamic repository. This option is selected by default. If the option is not selected then only a table definition object in the project repository is created.

Protecting a project
If you are a Production Manager or Administrator user, you can convert the project to a protected project. A protected project is a special category of project and, normally, nothing can be added, deleted, or changed in the project. Currently on UNIX systems only root or the administrative user can protect or unprotect a project. Users can view objects in the project, and perform tasks that affect the way a job runs rather than the jobs design; specifically they can: v Run jobs v Set job properties v Set job parameter default values Users with Production Manager and Administrator status can import existing InfoSphere DataStage components into a protected project. To convert the current project into a protected one, click the Protect Project button. A dialog box asks you to confirm the conversion. Click OK to proceed. The Protect Project button changes to an Unprotect Project button, so you can convert the project back to unprotected status if required. After a project has been protected, only a Production Manager or Administrator user (who is root or the administrative user on UNIX) can unprotect it. Operators can add and amend environment variables in protected projects. Protected projects are identified in the Administrator client by the string (Protected) after their name. Related reference Permissions page on page 14 These topics describes InfoSphere DataStage user roles and how to change the assignment of these roles to users or groups.

Setting environment variables

You can set project-wide defaults for general environment variables or ones specific to parallel jobs from this page.

Chapter 4. Setting project properties

13

You can also specify new variables. All of these are then available to be used in jobs. They are added to jobs in the same way as job parameters (see InfoSphere DataStage Designer Client Guide). To define environment variables, click the Environment... button. The Environment Variables dialog box appears. Choose the type of environment variable for which you want to set a default from the tree in the left pane. A list of available variables appears in the right pane. You can select a new value for the variable in the Value column. To define a new variable, choose User Defined. A dialog box appears asking you to specify the name of the variable and a default value. You can also set a type for a user defined variable. Choose between string (the default) and encrypted. If you choose encrypted, a further dialog box requests you enter the encrypted string value and then confirm it. Click Set to Default to set the selected environment variable to its installed default value. Click All to Default to set the environment variables currently visible to their installed default values. Click Variable Help to get help information about the selected variable. If you change the setting for an environment variable it will affect all the jobs in the project. If you want to change an environment variable for a particular job, leave the Value column empty, and specify the setting of the environment variable via a job parameter (see InfoSphere DataStage Designer Client Guide).

Enabling operational metadata at the project level (parallel and server jobs)
You can enable operational metadata at the project level in IBM InfoSphere DataStage and QualityStage server and parallel jobs by selecting Generate operational metadata in the Administrator client. When you run a job in the project, metadata is collected that describes the job run and the data warehouse resources that it affects. You can then use the Run Importer utility to import this operational metadata into the repository. You can analyze it in IBM Metadata Workbench and report on it in the Web console. In the Director client, you can override the project-level setting for individual jobs. For more information on operational metadata, see IBM InfoSphere Information Server Guide to Managing Operational Metadata for Job Runs

Permissions page
These topics describes InfoSphere DataStage user roles and how to change the assignment of these roles to users or groups. Before any user can access InfoSphere DataStage they must be defined in the Suite Administrator tool as a DataStage Administrator or a DataStage User. As a DataStage administrator you can define whether a DataStage user can access a project, and if so, what category of access they have.

14

Administrator Client Guide

Using the Suite Administrator tool you can also add groups and assign users to groups. These groups are in turn allocated the role of DataStage Administrator or DataStage User. Any users belong to an administrator group will be able to administer InfoSphere DataStage. As a DataStage Administrator you can give a DataStage user group access to a project and assign a role to the group. When setting up users and groups, these still have to have the correct permissions at the operating system level to access the folders in which the projects reside. Users must also be administrative users on the Windows computer where InfoSphere DataStage clients are installed in order to be able to use those clients. This section also explains how to change the default view of job log entries for those who have the DataStage Operator or DataStage Super Operator role. The Permissions page contains the following controls: v Roles. This window lists all the users and groups who currently have access to this project and lists their roles. Note that this window will always include users who have been defined as DataStage Administrators in the Suite Administrator tool, and you cannot remove such users from the list or alter their user role. v User Role. This list contains the four categories of InfoSphere DataStage user you can assign. Choose one from the list to assign it to the user currently selected in the roles window. v Add User or Group. Click this to open the Add Users/Groups dialog box in order to add a new user or group to the ones listed in the roles window. v Remove. Click this to remove the selected user or group from those listed in the roles window. v DataStage Operator can view full log. By default this check box is selected, letting an InfoSphere DataStage operator view both the error message and the data associated with an entry in a job log file. To hide the data part of the log file entry from operators, clear this check box. Access to the data is then restricted to users with a developer role or better. After you have assigned users, groups, and roles for a project, you can use this project as a template when adding new projects. New projects can inherit the users, groups, and roles from the project so that you do not have to repeat the process every time that you add a new project. Related tasks Protecting a project on page 13 If you are a Production Manager or Administrator user, you can convert the project to a protected project.

InfoSphere DataStage user roles

To prevent unauthorized access to InfoSphere DataStage projects, you must assign the InfoSphere DataStage users or groups on your system the appropriate InfoSphere DataStage user role. There are four InfoSphere DataStage user roles: v DataStage Developer, who has full access to all areas of a DataStage project (except for protected projects). v DataStage Production Manager, who has full access to all areas of a DataStage project, and can also create and manipulate protected projects. (Currently on UNIX systems the Production Manager must be root or the administrative user in order to protect or unprotect projects.)
Chapter 4. Setting project properties

15

v DataStage Operator, who has permission to run and manage DataStage jobs. Operators can add and amend environment variables in protected projects. v DataStage Super Operator, who has permission to run and manage DataStage jobs, and to view items in the Designer (although not to edit them).

Assigning InfoSphere DataStage user roles

You can view the InfoSphere DataStage users and groups in the Administrator client. You assign suite user roles in the IBM InfoSphere Information Server Web console. To view InfoSphere DataStage users or groups: 1. Open the Permissions page. 2. Click the Projects tab in the Administrator window to move this page to the front. 3. Select the project. 4. Click Properties to display the Project Properties window. 5. Click the Permissions tab to move this page to the front. By default the Permissions tab shows all the users or groups that have been defined as DataStage Administrators in the Administration tab of the Web console. Such users automatically have access to the DataStage Administrator role for this project. You cannot remove that access right as the User Role drop-down list and Remove button are both disabled. 6. To add an InfoSphere DataStage user: a. Open the Web console. b. In the Navigation pane, click Users and Groups. c. Click Users. d. To assign a user, follow the instructions in the Web console help. 7. To remove an InfoSphere DataStage user or group you have previously added to this project: a. From the Administration tab of the Web console, select the user in the Users table. b. Click Delete in the task pane.

Changing the operator's view of job log entries

Entries in a job log file consist of an error message and data associated with the error. By default, the Director displays both the message and the data when a DataStage operator or super operator views the details of an event. To override this setting so that only the error message is visible to an operator, clear the DataStage Operator can view full log check box on the Permissions page, then click OK. Access to the associated data is then restricted to users with Developer rights.

Enabling tracing on the InfoSphere Information Server engine

You can trace activity on the InfoSphere Information Server engine to help diagnose project problems. The default is for tracing to be disabled. When you enable tracing, information about engine activity is recorded for any clients that attach to the project. This

16

Administrator Client Guide

information is written to trace files, and users with in-depth knowledge of the system software can use it to help identify the cause of a client problem. If tracing is enabled, users receive a warning message whenever they start an InfoSphere DataStage client. Tracing is not compatible with the job administration command Cleanup Resources, which you also enable from the Administration client. See Enabling Job Administration in the Director for more information. 1. Click the Projects tab in the Administrator window to move this page to the front. 2. Select the project. 3. Click Properties to display the Project Properties window. 4. Click the Tracing tab to move this page to the front. 5. Click the Enabled option button in the Server side tracing area. 6. Click OK to activate tracing. Trace files are added to the Trace files list box on the Tracing page whenever a client attaches to the project. 7. To view a trace file, double-click the file name in the Trace files list box, or select the file name and then click the View button. The View trace file window displays the trace file. To copy trace information to the clipboard, select text in the View trace file window, then click Copy. 8. To delete a trace file, select one or more file names in the Trace files list box, and then click the Delete button.

Specifying a scheduling user

Where the engine is running on a Windows computer, InfoSphere DataStage uses the Windows Schedule service to schedule jobs. This means that by default the job runs under the user name of the Schedule service, which defaults to NT system authority. You might find that the NT system authority does not have enough rights to run the job. To overcome this, you can define a user name to run scheduled jobs in a project as follows: 1. Click the Projects tab in the Administrator window to move this page to the front. 2. Select the project. 3. Click Properties to display the Project Properties window. 4. Click the Schedule tab to move this page to the front. 5. Enter the user name and password you want to use to run the scheduled jobs. 6. Click Test to test that the user name and password can be used successfully. This involves scheduling and running a command on the InfoSphere Information Server engine, so the test might take some time to complete. 7. Click OK to save the user name and password.

Supplying mainframe information

When mainframe jobs are uploaded from the Designer to a mainframe computer, a JCL script is also uploaded. The script provides information required when the mainframe job is compiled. If you have a project that supports mainframe jobs, you need to define the mainframe job properties for inclusion in the script. You also need to set the
Chapter 4. Setting project properties

17

default platform type. This platform type is the default when new objects, such as a mainframe routine, are created in the Designer. The page also allows you to specify details about how nulls are defined in flat files. To set mainframe job properties and the default platform type: 1. Click the Projects tab in the Administrator window to move this page to the front. 2. Select a project that supports mainframe jobs. 3. Click Properties to display the Project Properties window. 4. Click the Mainframe tab to move this page to the front. The Mainframe tab is enabled only if the selected project supports mainframe jobs. 5. Select the default date format for the project from the Date Format drop-down list. (The project default can be overridden at job level in the Job properties dialog box in the Designer client.) 6. Select the type of platform from the Platform Type list. 7. Enter the database system name, your user name, and password. 8. To change the default maximum block size and maximum blocking factor for the selected platform, enter new values in the Max. Blocking Factor and Max. Block Size fields. (On an OS/390 platform, the maximum blocking factor can be a value from 1 to 32767. The maximum block size can be zero or a value from 4096 to 32767. If you specify zero, the operating system will determine the optimal block size for you.) 9. To make the selected platform the default, click the Set as Default button. "Default" appears in parentheses after the platform type. 10. Select Perform expression semantic checking to turn semantic checking on for the expression editor by default in all mainframe jobs in the project. You can override this setting at job level if required. 11. Select Support extended decimal to enable the use of extended decimal types in the jobs in the project. The Maximum decimal size field is then enabled. 12. Select Generate operational metadata to have mainframe jobs in the project generate operational metadata by default. You can override this setting at job level if required. 13. If you have selected Support extended decimal, in the Maximum decimal size field enter the maximum value that can be specified in the Length field of metadata used in mainframe jobs in the project. This can be 18 (the default) or 31. 14. From the Null indicator location drop-down list, select Before column or After column to specify the position of NULL indicators in mainframe column definitions. 15. In the Null indicator value field, specify the character used to indicate nullability of mainframe column definitions. NULL indicators must be single-byte, printable characters. Specify one of the following: v A single character value (1 is the default) v An ASCII code in the form of a three-digit decimal number from 000 to 255 v An ASCII code in hexadecimal form of %Hnn or %hnn where 'nn' is a hexadecimal digit (0-9, a-f, A-F) 16. In the Non-Null Indicator Value field, specify the character used to indicate non-NULL column definitions in mainframe flat files. NULL indicators must be single-byte, printable characters. Specify one of the following:

18

Administrator Client Guide

A single character value (0 is the default) An ASCII code in the form of a three-digit decimal number from 000 to 255 An ASCII code in hexadecimal form of %Hnn or %hnn where 'nn' is a hexadecimal digit (0-9, a-f, A-F) 17. Click OK to save your changes. v v v

Tunables page
The Tunables page allows you to set up caching details for hashed file stages and to set up row buffering to improve performance of server jobs.

Hashed file caching

When a Hashed File stage writes records to a hashed file, there is an option for the write to be cached rather than written to the hashed file immediately. Similarly, when a Hashed File stage is reading a hashed file there is an option to pre-load the file to memory, which makes subsequent access very much faster and is used when the file is providing a reference link to a Transformer stage. (UniData Stages also offer the option of preloading files to memory, in which case the same cache size is used.) The Hashed file stage area of the Tunables page lets you configure the size of the read and write caches. 1. To specify the size of the read cache, enter a value between 0 and 999 in the Read cache size (MB) field. The value, which is in megabytes, defaults to 128. 2. To specify the size of the write cache, enter a value between 0 and 999 in the Write cache size (MB) field. The value, which is in megabytes, defaults to 128. 3. Click OK to save your changes.

Row buffering
The use of row buffering can greatly enhance performance in server jobs. Select the Enable row buffer check box to enable this feature for the whole project. There are two types of mutually exclusive row buffering: v In process. You can improve the performance of most jobs by turning in-process row buffering on and recompiling the job. This allows connected active stages to pass data via buffers rather than row by row. v Inter process. Use this if you are running server jobs on an SMP parallel system. This enables the job to run using a separate process for each active stage, which will run simultaneously on a separate processor. You cannot use row-buffering of either sort if your job uses COMMON blocks in transform functions to pass data between stages. This is not recommended practice, and it is advisable to redesign your job to use row buffering rather than COMMON blocks. When you have enabled row buffering, you can specify the following: v Buffer size. Specifies the size of the buffer used by in-process or inter-process row buffering. Defaults to 128 Kb.

Chapter 4. Setting project properties

19

v Timeout. Only applies when inter-process row buffering is used. Specifies the time one process will wait to communicate with another via the buffer before timing out. Defaults to 10 seconds.

Parallel page
The parallel page allows you to specify certain defaults for parallel jobs in the project. If you select the Generated OSH visible for Parallel jobs in ALL projects option, you will be able to view the code that is generated by parallel jobs at various points in the Designer and Director: v v v v In the In the When In the Job Properties dialog box for parallel jobs. job run log message. you use the View Data facility in the Designer. Table Definition dialog box.

Note that selecting this option enables this feature for all projects, not just the one currently selected. The Advanced runtime options for Parallel Jobs field allows experienced Orchestrate users to enter parameters that are added to the OSH command line. Under normal circumstances this should be left blank. You can use this field to specify the -nosortinsertion or -nopartinsertion options. These prevent the automatic insertion of sort or partition operations where InfoSphere DataStage considers they are required. This applies to all jobs in the project. Message Handler for Parallel Jobs allows you to specify a message handler for all the parallel jobs in this project. You define message handlers in the Director. They allow you to specify how certain warning or information messages generated by parallel jobs are handled. Choose one of the pre-defined handlers from the drop-down list. The Format defaults area allows you to override the system default formats for dates, times, timestamps, and decimal separators. To change a default, clear the corresponding System default check box, then either select a new format from the drop down list or type in a new format.

Sequence page
Use this page to set compilation defaults for job sequences. You can optionally have InfoSphere DataStage add checkpoints to a job sequence so that, if part of the sequence fails, you do not necessarily have to start again from the beginning. You can fix the problem and rerun the sequence from the point at which it failed. You can also specify that InfoSphere DataStage automatically handle failing jobs within a sequence (this means that you do not have to have a specific trigger for job failure). The remaining options allow you to specify that job sequences, by default, log a message in the sequence log if they run a job that finishes with warnings or fatal errors, or a command or routine that finishes with an error status. You can also have the log record a status report for a job immediately the job run finishes.

20

Administrator Client Guide

Remote page
This page allows you to specify whether you are: v Deploying parallel jobs to run on a USS system OR v Deploying parallel jobs to run on a deployment platform (which could, for example, be a system in a grid).

Deploying on USS systems

Where you are deploying parallel jobs on a USS system, this page allows you to specify details about the deployment. You can specify the following details: v The mode of deployment. v Details of the USS machine being deployed to (this can be used for sending files and remote shell execution). v Details of a remote shell used to execute commands on the USS machine. v The location on the USS machine of the deployment files. The page contains the following fields: v Deploy standalone Parallel job scripts. Select this option to use the standalone method of deployment. This means that parallel jobs on the USS machine are run by you, not by InfoSphere DataStage. If you select only this method, and specify no target machine details, you are also responsible for transferring script files and setting their permissions appropriately. v Jobs run under the control of DataStage. Select this option to run jobs on the USS machine from the Director. InfoSphere DataStage uses the details you provide in the remainder of this page to FTP the required files to the USS machine and execute it via a remote shell. You can, if required, have both of the above options selected at the same time. This means that files will be automatically sent and their permissions set, and you can then choose to run them via the Director, or directly on the USS machine. The target machine details are specified as follows: v Name. Name of the USS machine to which you are deploying jobs. This must be specified if you have Jobs run under the control of DataStage selected. Note that, if you supply this while you have Deploy standalone Parallel job scripts only selected, InfoSphere DataStage will attempt to FTP the files to the specified machine. The machine must be accessible from the machine on which the InfoSphere Information Server engine resides (accessibility from the client is not sufficient). v Username. The username used for transferring files to the USS machine. This can also be used for the remote shell if so specified in the remote shell template. v Password. The password for the username. This can also be used for the remote shell if so specified in the remote shell template. v Remote shell template. Gives details of the remote shell used for setting execution permissions on transferred files and executing deployed jobs if you are running them from the Designer. The template is given in the form:
rshellcommand options tokens

For example:
rsh -l %u %h %c
Chapter 4. Setting project properties

21

The tokens allow you to specify that the command takes the current values for certain options. The available tokens are: %h -host %u - username %p - password %c - command to be executed on remote host Remote shell details must be supplied if you have Jobs run under the control of DataStage selected. If you have Deploy standalone Parallel job scripts only selected, InfoSphere DataStage will use any remote shell template you provide to set the required permissions on any transferred job deployment files and perform other housekeeping tasks. You might have security concerns around specifying username and password for remote shell execution in this way. An alternative strategy is to specify a user exit on the USS machine that explicitly identifies permitted users of the remote shell. The location for the deployment files on the USS machine are set as follows: v Base directory name. This specifies a base directory on the USS machine. The name of your USS project is added to this to specify a home directory for your project. Each job is located in a separate directory under the home directory. You must specify a full (absolute) pathname, not a relative one). v Deployed job directory template. This allows you to optionally specify a different name for the deployment directory for each job. By default the job directory is RT_SCjobnum where jobnum is the internal jobnumber allocated by InfoSphere DataStage. For example, where you have designated a base directory of /u/cat1/remote, and your project is called USSproj, you might have a number of job directories as follows: /u/cat1/remote/USSproj/RT_SC101 /u/cat1/remote/USSproj/RT_SC42 /u/cat1/remote/USSproj/RT_SC1958 The template allows you to specify a different form of job directory name. The following tokens are provided: %j - jobname %d - internal number You can prefix the token with some text if required. For example, if you specified the following template: job_%d The job directories in the example would be: /u/cat1/remote/USSproj/job_101 /u/cat1/remote/USSproj/job_42 /u/cat1/remote/USSproj/job_1958 If you choose to use job names for your directory names, note that the following are reserved words, and you must ensure that none of your jobs have such a name: buildop wrapped wrapper v Custom deployment commands. This optionally allows you to specify further actions to be carried out after a job in a project marked for standalone deployment has been compiled. These actions normally take place on your InfoSphere Information Server engine machine, but if you have FTP enabled (that is, have specified FTP connection details in the target machine area), they take place on the USS machine. In both cases, the working directory is that containing the job deployment files. The following tokens are available:

22

Administrator Client Guide

 %j - jobname %d - internal number You could use this feature to, for example, to tar the files intended for deployment to the USS machine:
tar -cvf ../%j.tar *

This creates a tar archive of the deployed job with the name jobname.tar.

Deploying on remote systems

Where you are deploying parallel jobs on other, deployment-only systems, this page lets you: v Provide a location for the deployment. v Specify names for deployment directories. v Specify further actions to be carried out at the end of a deployment compile. For a more detailed description of deploying parallel jobs, see InfoSphere DataStage Parallel Job Developer Guide. To specify remote deployment: 1. Do not select either of the options in the USS support section. 2. In the Base directory name field, provide a home directory location for deployment; in this directory there will be one directory for each job. This location has to be accessible from the InfoSphere Information Server engine machine, but does not have to be a disk local to that machine. Providing a location here enables the job deployment features. 3. In the Deployed job directory template field, optionally specify an alternative name for the deployment directory associated with a particular job. This field is used in conjunction with Base directory name. By default, if nothing is specified, the name corresponds to the internal script directory used on the InfoSphere Information Server engine project directory, RT_SCjobnum, where jobnum is the internal job number allocated to the job. Substitution strings provided are: v %j - jobname v %d - internal number The simplest case is just "%j" - use the jobname. A prefix can be used, that is, "job_%j". The default corresponds to RT_SC%d. 4. In the Custom deployment commands field, optionally specify further actions to be carried out at the end of a deployment compile. You can specify Unix programs and /or calls to user shell scripts as required. This field uses the same substitution strings as the directory template. For example:
tar -cvf ../%j.tar * ; compress ../%j.tar

will create a compressed tar archive of the deployed job, named after the job.

Logs page
Use the logs page to control how the jobs in your project log information when they run.

Chapter 4. Setting project properties

23

Purging job log files

Every InfoSphere DataStage job has a log file, and every time you run a job, new entries are added to the log file. To prevent the files from becoming too large, they must be purged from time to time. You can set project-wide defaults for automatically purging job logs, or purge them manually. If you change the defaults in the Administrator client, the new settings are reflected in the jobs in the project, unless a job has overridden the default settings (which can be done from the Director client), in which case it keeps the override values. To set automatic purging for a project: 1. Click the Projects tab in the Administrator window to move this page to the front. 2. Select the project. 3. Click Properties. The Project Properties window appears, with the General page displayed. 4. Click the Logs tab. 5. In the Logs page, select the Auto-purge of job log check box. 6. Select the Auto-purge action. You can purge jobs over the specified number of days old, or specify the number of jobs you want to retain in the log. For example, if you specify 10 job runs, entries for the last 10 job runs are kept. 7. Click OK to set the auto-purge policy. Auto-purging is applied to all new jobs created in the project. You can set auto-purging for existing jobs from the Clear Log window. Select Job Clear Log... from the Director window to access this window. You can override automatic job log purging for an individual job by choosing Job Clear Log... from the Director window.

Enabling operational repository logging

You can specify that the jobs in your project write logging information to the operational repository when they run. When job logs are written to the operational repository, then that information is available to other components in the IBM InfoSphere Information Server suite. For example, you can view the log information in the InfoSphere Information Server web console. You can set up filters so that only a subset of the logging information is written to the operational repository. Most messages generated by a job run are Informational or Warning messages. The remaining messages are the Start, End, Reset, Reject, Abort, and Fatal messages. To reduce the volume of log messages sent to the operational repository, you can specify the maximum number of Information and Warning messages to include. 1. Click the Projects tab in the Administrator window to move this page to the front. 2. Select the project. 3. Click Properties. The Project Properties window opens, with the General page displayed. 4. Select the Logs tab. 5. In the Log page, select Enable Operational Repository Logging.

24

Administrator Client Guide

6. Optional: Select Maximum number of 'Informational' messages that will be written to the Operational Repository for a job run, and set a value for this option (the default value is 10). 7. Optional: Select Maximum number of 'Warning' messages that will be written to the Operational Repository for a job run, and set a value for this option (the default value is 10).

Chapter 4. Setting project properties

25

26

Administrator Client Guide

Chapter 5. Configuring projects for NLS

IBM InfoSphere DataStage has built-in National Language Support (NLS). This means InfoSphere DataStage can: v Process data in a wide range of languages v Use local formats for dates, times, and money v Sort data according to local rules Using NLS, InfoSphere DataStage holds data in Unicode format. This is an international standard character set that contains many of the characters used in languages around the world. InfoSphere DataStage maps data to or from Unicode format as required. Each InfoSphere DataStage project has a map and a locale assigned to it during installation. The map defines the character set that the project can use. The locale defines the local formats for dates, times, sorting order, and so on (sorting order only for parallel jobs), that the project should use. The InfoSphere DataStage client and engine components also have maps assigned to them during installation to ensure that data is transferred in the correct format. InfoSphere DataStage has different mechanisms for implementing NLS for server and parallel jobs, and so you set map and locale details separately for the two types of job. Under normal circumstances, the two settings will match. From the Administrator window, you can check which maps and locales were assigned during installation and change them as required.

Changing project maps

To view or change a project map: 1. Click the Projects tab in the Administrator window to move this page to the front. 2. Select the project. 3. Click NLS... . The Project NLS Settings window appears. If the NLS... button is not active, you do not have NLS installed. 4. Choose whether you want to set the project map for server jobs or parallel jobs and choose the Server Maps or Parallel Maps tab accordingly.

Server job project maps

The Default map name field shows the current map that is used for server jobs in the project. By default, the list shows only the maps that are loaded and ready to use in InfoSphere DataStage. You can examine the complete list of maps that are supplied with InfoSphere DataStage by clicking Show all maps. To change the default map name for the project, click the map name you want to use, then click OK.
Copyright IBM Corp. 1997, 2010

27

To install a map into InfoSphere DataStage, click Install to see additional options on the Maps page. The Available list shows all the character set maps that are supplied with InfoSphere DataStage. The Installed/loaded list shows the maps that are currently installed. To install a map, select it from the Available list and click Add. The map is loaded into InfoSphere DataStage ready for use the next time the server is restarted. If you want to use the map immediately, you must restart the server engine. To remove an installed map, select it from the Installed/loaded list and click Remove. The map is unloaded the next time the server is rebooted or the server engine is restarted. Related tasks Client and server maps When you installed the InfoSphere Information Server engine, you specified the language that you wanted InfoSphere DataStage to support. InfoSphere DataStage automatically sets the language supported on the InfoSphere DataStage clients to match what you specified for the server.

Parallel job project maps

The Default map name field shows the current map that is used for parallel jobs in the project. The list shows only the maps that are loaded and ready to use in InfoSphere DataStage. Double-click the map you want to make the default map.

Changing project locales

To view or change default project locales, having opened the Project NLS Settings Window, click the Server Locales tab or Parallel Locales tab as appropriate.

Server job locales

This page shows fields for the default project locales in five categories: v Time/Date - The format for dates and times, for example, 31 Dec 1999 or 12/31/99 are two ways of expressing the same date that might be used in different locales. v Numeric - The format used for numbers, including the thousands separator and radix (decimal) delimiter. v Currency - The format for monetary strings, including the type and position of the currency sign ($, , , , and so on). v CType - The format for character types. This includes defining which characters can be uppercase or lowercase characters in a language. v Collate - The sort order used for a language. By default, each field has a drop-down list of the locales that are loaded and ready to use. To change a locale in any category, select the locale you want from the drop-down list. Click OK when you have completed your changes. You can examine the complete list of locales that are supplied with InfoSphere DataStage by clicking Show all locales, then clicking a category drop-down list. These locales must be installed and loaded into InfoSphere DataStage before you can use them.

28

Administrator Client Guide

Related tasks Changing project locales To view or change default project locales, having opened the Project NLS Settings Window, click the Server Locales tab or Parallel Locales tab as appropriate. Server job locales Parallel job locales Only the collate category is used for parallel jobs. Choose a locale from the drop down list of installed locales.

Installing and loading locales

To install a locale, click Install to display further options on the Locales page. The Available list shows all the locales that are supplied with InfoSphere DataStage. The Installed/loaded list shows the locales that are currently installed. To install a locale, select it from the Available list and click Add. The locale is loaded into InfoSphere DataStage ready for use the next time the server engine is restarted. If you want to use the locale immediately, you can restart the server engine. To remove an installed locale, select it from the Installed/loaded list and click Remove. The locale is unloaded the next time the server engine is restarted.

Parallel job locales

Only the collate category is used for parallel jobs. Choose a locale from the drop down list of installed locales. The Browse button allows you to browse for text files that define other collation sequences.

Client and server maps

When you installed the InfoSphere Information Server engine, you specified the language that you wanted InfoSphere DataStage to support. InfoSphere DataStage automatically sets the language supported on the InfoSphere DataStage clients to match what you specified for the server. But if you access the InfoSphere Information Server engine from a different client, data might not be mapped correctly between the client and the engine. To prevent this from happening, you might need to change the client maps. To view the current mapping: 1. Click the General tab on the Administrator window to move this page to the front. 2. Click the NLS... button. The General NLS Settings window appears. The Current ANSI code page field is informational only, and contains the current Microsoft code page of the client. The code page is independent of the current project or engine. The Client/Server map in use field shows the name of the map being used on the engine computer for the current client session. The list shows all loaded maps. If you select a map and click Apply, InfoSphere DataStage attempts to set this map for all clients connecting to the current server that use the code page shown. The mapping is tested, and might be rejected if it is not appropriate.
Chapter 5. Configuring projects for NLS

29

To install further maps into InfoSphere DataStage, click Install to display further options on the Client page. InfoSphere DataStage uses special maps for client/server communication, with names ending in "-CS" (for Client Server). You should always choose one of these maps for this purpose. The Available list shows all the character set maps that are supplied with InfoSphere DataStage. The Installed/loaded list shows the maps that are currently installed. To install a map, select it from the Available list and click Add. The map is loaded into InfoSphere DataStage ready for use at the next time the server is restarted. If you want to use the map immediately, you can restart the server engine. To remove an installed map, select it from the Installed/loaded list and click Remove. The map is unloaded the next time the server is rebooted or the server engine is restarted.

30

Administrator Client Guide

Product accessibility
You can get information about the accessibility status of IBM products. The IBM InfoSphere Information Server product modules and user interfaces are not fully accessible. The installation program installs the following product modules and components: v IBM InfoSphere Business Glossary v IBM InfoSphere Business Glossary Anywhere v IBM InfoSphere DataStage v IBM InfoSphere FastTrack v v v v IBM IBM IBM IBM InfoSphere InfoSphere InfoSphere InfoSphere Information Analyzer Information Services Director Metadata Workbench QualityStage

For information about the accessibility status of IBM products, see the IBM product accessibility information at http://www.ibm.com/able/product_accessibility/ index.html.

Accessible documentation
Accessible documentation for InfoSphere Information Server products is provided in an information center. The information center presents the documentation in XHTML 1.0 format, which is viewable in most Web browsers. XHTML allows you to set display preferences in your browser. It also allows you to use screen readers and other assistive technologies to access the documentation.

IBM and accessibility

See the IBM Human Ability and Accessibility Center for more information about the commitment that IBM has to accessibility:

Copyright IBM Corp. 1997, 2010

31

32

Administrator Client Guide

Accessing product documentation

Documentation is provided in a variety of locations and formats, including in help that is opened directly from the product client interfaces, in a suite-wide information center, and in PDF file books. The information center is installed as a common service with IBM InfoSphere Information Server. The information center contains help for most of the product interfaces, as well as complete documentation for all the product modules in the suite. You can open the information center from the installed product or from a Web browser.

Accessing the information center

You can use the following methods to open the installed information center. v Click the Help link in the upper right of the client interface. Note: From IBM InfoSphere FastTrack and IBM InfoSphere Information Server Manager, the main Help item opens a local help system. Choose Help > Open Info Center to open the full suite information center. v Press the F1 key. The F1 key typically opens the topic that describes the current context of the client interface. Note: The F1 key does not work in Web clients. v Use a Web browser to access the installed information center even when you are not logged in to the product. Enter the following address in a Web browser: http://host_name:port_number/infocenter/topic/ com.ibm.swg.im.iis.productization.iisinfsv.home.doc/ic-homepage.html. The host_name is the name of the services tier computer where the information center is installed, and port_number is the port number for InfoSphere Information Server. The default port number is 9080. For example, on a Microsoft Windows Server computer named iisdocs2, the Web address is in the following format: http://iisdocs2:9080/infocenter/topic/ com.ibm.swg.im.iis.productization.iisinfsv.nav.doc/dochome/ iisinfsrv_home.html. A subset of the information center is also available on the IBM Web site and periodically refreshed at http://publib.boulder.ibm.com/infocenter/iisinfsv/v8r5/ index.jsp.

Obtaining PDF and hardcopy documentation

v PDF file books are available through the InfoSphere Information Server software installer and the distribution media. A subset of the PDF file books is also available online and periodically refreshed at www.ibm.com/support/ docview.wss?rs=14&uid=swg27016910. v You can also order IBM publications in hardcopy format online or through your local IBM representative. To order publications online, go to the IBM Publications Center at http://www.ibm.com/e-business/linkweb/publications/ servlet/pbi.wss.

Copyright IBM Corp. 1997, 2010

33

Providing feedback about the documentation

You can send your comments about documentation in the following ways: v Online reader comment form: www.ibm.com/software/data/rcf/ v E-mail: [email protected]

34

Administrator Client Guide

Links to non-IBM Web sites

This information center may provide links or references to non-IBM Web sites and resources. IBM makes no representations, warranties, or other commitments whatsoever about any non-IBM Web sites or third-party resources (including any Lenovo Web site) that may be referenced, accessible from, or linked to any IBM site. A link to a non-IBM Web site does not mean that IBM endorses the content or use of such Web site or its owner. In addition, IBM is not a party to or responsible for any transactions you may enter into with third parties, even if you learn of such parties (or use a link to such parties) from an IBM site. Accordingly, you acknowledge and agree that IBM is not responsible for the availability of such external sites or resources, and is not responsible or liable for any content, services, products or other materials on or available from those sites or resources. When you access a non-IBM Web site, even one that may contain the IBM-logo, please understand that it is independent from IBM, and that IBM does not control the content on that Web site. It is up to you to take precautions to protect yourself from viruses, worms, trojan horses, and other potentially destructive programs, and to protect your information as you deem appropriate.

Copyright IBM Corp. 1997, 2010

35

36

Administrator Client Guide

Notices and trademarks

This information was developed for products and services offered in the U.S.A.

Notices
IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service. IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not grant you any license to these patents. You can send license inquiries, in writing, to: IBM Director of Licensing IBM Corporation North Castle Drive Armonk, NY 10504-1785 U.S.A. For license inquiries regarding double-byte character set (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to: Intellectual Property Licensing Legal and Intellectual Property Law IBM Japan Ltd. 1623-14, Shimotsuruma, Yamato-shi Kanagawa 242-8502 Japan The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you. This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice. Any references in this information to non-IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web

Copyright IBM Corp. 1997, 2010

37

sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk. IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you. Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact: IBM Corporation J46A/G4 555 Bailey Avenue San Jose, CA 95141-1003 U.S.A. Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee. The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us. Any performance data contained herein was determined in a controlled environment. Therefore, the results obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment. Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products. All statements regarding IBM's future direction or intent are subject to change or withdrawal without notice, and represent goals and objectives only. This information is for planning purposes only. The information herein is subject to change before the products described become available. This information contains examples of data and reports used in daily business operations. To illustrate them as completely as possible, the examples include the names of individuals, companies, brands, and products. All of these names are fictitious and any similarity to the names and addresses used by an actual business enterprise is entirely coincidental. COPYRIGHT LICENSE: This information contains sample application programs in source language, which illustrate programming techniques on various operating platforms. You may copy, modify, and distribute these sample programs in any form without payment to

38

Administrator Client Guide

IBM, for the purposes of developing, using, marketing or distributing application programs conforming to the application programming interface for the operating platform for which the sample programs are written. These examples have not been thoroughly tested under all conditions. IBM, therefore, cannot guarantee or imply reliability, serviceability, or function of these programs. The sample programs are provided "AS IS", without warranty of any kind. IBM shall not be liable for any damages arising out of your use of the sample programs. Each copy or any portion of these sample programs or any derivative work, must include a copyright notice as follows: (your company name) (year). Portions of this code are derived from IBM Corp. Sample Programs. Copyright IBM Corp. _enter the year or years_. All rights reserved. If you are viewing this information softcopy, the photographs and color illustrations may not appear.

Trademarks
IBM, the IBM logo, and ibm.com are trademarks of International Business Machines Corp., registered in many jurisdictions worldwide. Other product and service names might be trademarks of IBM or other companies. A current list of IBM trademarks is available on the Web at www.ibm.com/legal/copytrade.shtml. The following terms are trademarks or registered trademarks of other companies: Adobe is a registered trademark of Adobe Systems Incorporated in the United States, and/or other countries. Linux is a registered trademark of Linus Torvalds in the United States, other countries, or both. Microsoft, Windows, Windows NT, and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both. UNIX is a registered trademark of The Open Group in the United States and other countries. Java and all Java-based trademarks are trademarks of Sun Microsystems, Inc. in the United States, other countries, or both. The United States Postal Service owns the following trademarks: CASS, CASS Certified, DPV, LACSLink, ZIP, ZIP + 4, ZIP Code, Post Office, Postal Service, USPS and United States Postal Service. IBM Corporation is a non-exclusive DPV and LACSLink licensee of the United States Postal Service. Other company, product or service names may be trademarks or service marks of others.

Notices and trademarks

39

40

Administrator Client Guide

Contacting IBM
You can contact IBM for customer support, software services, product information, and general information. You also can provide feedback to IBM about products and documentation. The following table lists resources for customer support, software services, training, and product and solutions information.
Table 1. IBM resources Resource IBM Support Portal Description and location You can customize support information by choosing the products and the topics that interest you at www.ibm.com/support/ entry/portal/Software/ Information_Management/ InfoSphere_Information_Server You can find information about software, IT, and business consulting services, on the solutions site at www.ibm.com/ businesssolutions/ You can manage links to IBM Web sites and information that meet your specific technical support needs by creating an account on the My IBM site at www.ibm.com/account/ You can learn about technical training and education services designed for individuals, companies, and public organizations to acquire, maintain, and optimize their IT skills at http://www.ibm.com/software/swtraining/ You can contact an IBM representative to learn about solutions at www.ibm.com/connect/ibm/us/en/

Software services

My IBM

Training and certification

IBM representatives

Providing feedback
The following table describes how to provide feedback to IBM about products and product documentation.
Table 2. Providing feedback to IBM Type of feedback Product feedback Action You can provide general product feedback through the Consumability Survey at www.ibm.com/software/data/info/ consumability-survey

Copyright IBM Corp. 1997, 2010

41

Table 2. Providing feedback to IBM (continued) Type of feedback Documentation feedback Action To comment on the information center, click the Feedback link on the top right side of any topic in the information center. You can also send comments about PDF file books, the information center, or any other documentation in the following ways: v Online reader comment form: www.ibm.com/software/data/rcf/ v E-mail: [email protected]

42

Administrator Client Guide

Index A
Add Project dialog box 7 adding projects 7 Administrator 3 auto-purge defaults 24 files (continued) trace 16 non-IBM Web sites links to 35 NT system authority numbers 28 29 17

G
General NLS Settings window

O
operational metadata 14

C
changing locales 28 maps 27 character types 28 Cleanup Resources option 12 Clear Status File option 12 client and server maps 29 code page 29 Command Interface dialog box Command Output window 4 commands DataStage engine 4 currency signs 28 customer support 41

I
installing locales 29 maps 30 issuing DataStage engine commands 4

P
Permissions page 16 product accessibility accessibility 31 Project NLS Settings window 27 Project Properties window 11 project properties, editing 11 projects adding 7 deleting 8 moving 8 properties mainframe 17 project 11 purging, automatic 24

J
4 job administration 11 job properties, mainframe 17 jobs cleaning up files 11 clearing status file 12 log files 24 scheduling 17

D
DataStage Administration window 27 General page 3 DataStage Director enabling job administration in 11 DataStage engine issuing commands 4 DataStage Repository Import dialog box 9 DataStage users, setting up 15 dates 28 DatsStage engine tracing 16 deleting projects 8 deployment systems 23 dialog boxes Add Project 7 Command Interface 4 DataStage Repository Import 9

L
legal notices 37 locales 28 changing 28 installing 29 log files automatic purging 24 manual purging 24 operational repository 24 setting up operator's view 16

R
radix 28 remote deployment 23

S
Schedule page of Project Properties window 17 scheduling jobs 17 server timeout, setting 3 server tracing 16 setting auto-purge defaults 24 mainframe job properties 17 server timeout 3 user name for scheduled jobs 17 setting up DataStage users 14 software services 41 sort order 28 support customer 41 27

M
mainframe job properties, setting maps 27 changing 27 client and server 29 installing 30 message handlers 20 moving projects 8 17

E
enabling job administration in Director 11 tracing on the server 16 enabling editing of internal reference information 12 enabling tracing on the DataStage engine 16

N
National Language Support, see NLS NLS (National Language Support) client and server maps 29 locales 28 maps 27 overview 27 NLS option project settings 27 server settings 29

T
testing user name for scheduled jobs thousands separator 28 times 28 tracing server activity 16 17

F
files cleaning up log 24 11

Copyright IBM Corp. 1997, 2010

43

U
Unicode 27 user roles 15 USS systems 21

V
View trace file window viewing locales 28 maps 27 17

W
Web console Administration tab 3 Web sites non-IBM 35 windows Command Output 4 DataStage Administration 3, 27 General NLS Settings 29 Project NLS Settings 27 Project Properties 11 View trace file 17 Windows Schedule service 17

Z
Z/OS systems 21

44

Administrator Client Guide

Printed in USA

SC18-9895-02