HELIARC 161 AC/DC
POWER SOURCE
Heliarc 161 AC/DC
Square
wave AC output gives superior welding with
improved cleaning and lack of rectification
AC
wave balance control - allows adjustment from
maximum cleaning to maximum penetration
Arc
force control - fine tunes arc for stick welding
from soft to a high penetration, digging arc
Two
HF
Stroke or Four Stroke with Trigger Lock
starting (AC or DC) and Non-HF Starting (DC)
Direct
connections for Tig torch and electrode holder
for maximum convenience
Adjustable
preflow and postflow gas control -protects
weld area and extends tungsten life
Protected
Small
10
against overheating and overcurrent
and portable, inverter based
to 160A AC & DC TIG Welding
Adjustable
downslope control
Presettable
Low
start current
current draw
Ready-to-Weld Packages, add shield gas and
power to weld
Ordering Information
Heliarc 161 AC/DC Package Basics
Heliarc 161 packages listed below include power source, Heliarc
HW-17 TIG torch, TIG accessory kit, Remote Control, R-33-FM580 Reg/Flowmeter, 12.5 ft. gas hose, 15 ft. Work Cable & 1#
1/8" SteelArc 80LV Electrodes.
Heliarc 161 AC/DC Packages
Heliarc 161 AC/DC w/HW-17 12.5 ft./TC-3A ............... 0558002775
Heliarc 161 AC/DC w/HW-17 25 ft./TC-3A ................ 0558002777
Heliarc 161 AC/DC w/HW-17
12.5 ft. & 15 ft. Electrode Holder/FC-5B ................ 0558002776
Heliarc 161 AC/DC w/HW-17
25 ft. & 15 ft. Electrode Holder/FC-5B ................... 0558002778
Heliarc 161 AC/DC w/HW-17
12.5 ft. & 15 ft. Electrode Holder/TC-2B ................0558004452
Heliarc 161 AC/DC w/HW-17
25 ft. & 15 ft. Electrode Holder/TC-2B ...................0558004453
Options & Accessories
HW-17 Accessory Kit ..........................................................999126
R-33 FM 580 Reg/Flowmeter ...............................................21557
Primary Extension Cord (25 ft.) 50 amp ............................. 37833
FC-5C Foot Control ................................................... 0558004234
Work Cable 15 ft. TL ............................................................. 35881
Gas Hose 6 ft. ........................................................................31503
Gas Hose 12-1/2 ft. ............................................................... 40V77
Gas Hose 25 ft. ..................................................................... 34V38
HW-17 12-1/2 ft. (req's 0558002692 Adapter).........................16X48
HW-17 25 ft. (req's 0558002692 Adapter)..............................16X50
Electrode Holder 15 ft. 175 amp ................................ 0558001791
Tee Connector (1 Male/2 Female) ................................. 13792804
Torch Adaptor HW-17 Std. to Twist Lock ................... 0558002692
(This adaptor allows a standard one piece HW-17 to a 50 mm
Twist Lock.)
TC-3A Remote Torch Switch - 30 ft. cable with 14 pin plug
.......................................................................................... 35783
Provides on/off contactor control.
(Note: Does not provide current control.)
TC-2B Torch Control - 25 ft. cable with 14 pin plug ............ 33839
Attach to torch handle. Provides remote current and contactor
control.
50 mm Connectors - quick-acting twist lock connectors for
attaching output power cables or torches to power source:
Male for 1/0 to 4/0 cable ...................................................13792513
Female for 1/0 to 4/0 cable ...............................................13735631
Male for #2 AWG to 1/0 cable.......................................... 13733936
Female for #2 AWG to 1/0 cable ..................................... 13735632
Quick connector with 1/2 in. threaded stud ......................13735501
Tee connector- 1 male, 2 female ..................................... 13792804
Specifications
Heliarc 161 AC/DC
Primary Input Voltage/Phase ...........208/230 vac, 1 ph., 50/60 Hz.
Primary Input Current @ Rated Load ......................... 30/27 Amps
Efficiency ................................................................................ 83%
Power Factor............................................................................. .81
TIG Duty Cycle & Rated Output ........ 40% - 160 amps @ 16.4 V
STICK Duty Cycle & Rated Output ..... 35% - 160 amps @ 26.0 V
Open Circuit Voltage (max) .....................................................50V
Net Weight ............................................................28.7 lbs. (13 kg)
W x L x H ........ 8.0 in. (20 cm) x 14.4 in. (37 cm) x 16.4 in. (42 cm)
Instruction Manual ..........................................................F-15-655
Sales Literature
Heliarc 161 ................................................................ ARC-23101
77
