Scribd
Upload
654 views

RF Based Smart Zone Vehicle Speed Monitoring and Control System

This document describes an embedded system that uses RF technology to monitor and control vehicle speeds in school and college zones. The system includes an RF transmitter that sends a signal within a predetermined area. An RF receiver in vehicles detects this signal and automatically limits the vehicle's speed. The embedded system comprises both hardware like an RF transmitter and receiver, and software programmed using embedded C to control the microcontroller. The goal is to reduce accidents by limiting speeds near schools and colleges.

Uploaded by

ieee4mybusinessonly
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
654 views

RF Based Smart Zone Vehicle Speed Monitoring and Control System

This document describes an embedded system that uses RF technology to monitor and control vehicle speeds in school and college zones. The system includes an RF transmitter that sends a signal within a predetermined area. An RF receiver in vehicles detects this signal and automatically limits the vehicle's speed. The embedded system comprises both hardware like an RF transmitter and receiver, and software programmed using embedded C to control the microcontroller. The goal is to reduce accidents by limiting speeds near schools and colleges.

Uploaded by

ieee4mybusinessonly
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

RF BASED SMART ZONE VEHICLE SPEED MONITORING AND CONTROL SYSTEM

ABSTRACT
An embedded system is a special-purpose computer system designed to perform a dedicated function. Unlike a general-purpose computer, such as a personal computer, an embedded system performs one or a few pre-defined tasks, usually with very specific requirements. Since the system is dedicated to specific tasks, design engineers can optimize it, reducing the size and cost of the product. Embedded system comprises of both hardware and software. Embedded system is fast growing technology in various fields like industrial automation, home appliances, automobiles, aeronautics etc., embedded technology uses PC or a controller to do the specified task and the programming is done using assembly language programming or embedded C. Now a days accidents are increasing at a large pace, and various technologies are being introduced to reduce the accidents. The main aim of our project is to control the over speed of vehicle for school and college zone using the robot. Here we use the RF technology for that controlling. By this project we can control the vehicle speed through the radio frequency. The transmitter will receive the signal in the predetermined area only. When transmitter receives the signal, automatically it will display as school zone and control the speed limit of vehicle. The software for the microcontroller is written using embedded C.

BLOCK DIAGRAM
RF TRANSMITTER

RF RECEIVER

You might also like