Service Protection: Example With Cesop
Service Protection: Example With Cesop
History
Changes First issue Update of slide Configurations: CCI value and description
Reference scenario
A1200 - A
Main path
A1200 - B A1200 - D
A1200 - C
Protection path
Service creation
Service is created exactly as without protection
See CESoP service - 1xE1.ppt or CESoP service - nxE1.ppt or E-Line service.ppt
End points
LCT Menu: LCT Menu: Services Create Protection A1200-A
A1200-C
Configurations
Ref. 1 2 3 4 5 6 7 8 Parameter Protection type MEP ID local main MEP ID remote main MEP ID local stand-by MEP ID remote stand-by MA name main MA name stand-by CCI Value in A1200-A Protected 1 2 1 2 60 61 100ms Value in A1200-C Protected 2 1 2 1 60 61 100ms Notes Monitor is just used for collecting statistics, not for protection It could be the same values for all the protected services It could be the same values for all the protected services It could be the same values for all the protected services It could be the same values for all the protected services Constraint is that MA name and stand-by are different. General rule is to use the S-VID Constraint is that MA name and stand-by are different. General rule is to use the stand-by S-VID This is the interarrival time of the monitoring messages. They are used for service performance monitoring. This value does not determine the switching time, since for CESoP service the protection switch is triggered by the absence of the data packets. This is the common setting Its the time that shall pass before the main link is switched back (if available) It shall be different from any other service.
9 10 11 12 13
Revertive 60 61 Module 0 6
Revertive 60 61 Module 0 4
Middle point
LCT Menu: LCT Menu: Services Create
14 15 16 17 18 19 20 21 22 23
Description Service type Service VLAN ID Profile name First Port First Port module First Port port First Port First Port module First Port port
Any value that describe the service For creating intermediate service protection carrying CESoP S-VID that identify the service protection in the transport network Profile to be associated to the service. For services contain more than 1xE1 a proper profile shall be associated.