Scribd
Upload
730 views1 page

Aisi 4140 PH

Paxton & Vierling Steel produces AISI 4140PH steel that is pre-hardened through an oil-quenching and tempering process, resulting in a hardness between 269-321 Brinell. This process gives the steel optimum hardness, toughness, compressive strength and machinability. 4140PH steel is well-suited for use in dies for press brakes that form and bend sheet metal and other materials, as well as machine parts requiring high mechanical properties. It can also be used for backup tooling, die holders, and short run stamping and bending dies due to its pre-hardened yet machinable characteristics.

Uploaded by

123vigen
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
730 views1 page

Aisi 4140 PH

Paxton & Vierling Steel produces AISI 4140PH steel that is pre-hardened through an oil-quenching and tempering process, resulting in a hardness between 269-321 Brinell. This process gives the steel optimum hardness, toughness, compressive strength and machinability. 4140PH steel is well-suited for use in dies for press brakes that form and bend sheet metal and other materials, as well as machine parts requiring high mechanical properties. It can also be used for backup tooling, die holders, and short run stamping and bending dies due to its pre-hardened yet machinable characteristics.

Uploaded by

123vigen
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Paxton & Vierling Steel

ESTABLISHED 1885

Phone 712-347-5500 800-831-9252 Fax 712-347-6166

AISI 4140PH
TYPICAL ANALYSIS MIN. Carbon........ Manganese..... Silicon....... Phosphorus.... Sulfur........ Chromium...... Molybdenum.... .380% .700% .150% .000% .000% .800% .150% MAX .460% 1.000% .400% .035% .040% 1.150% .250% DESCRIPTION ... 4140PH steel is heat-treated by oil-quenching and tempering before shipment to a hardness ranging from Brinell 269 to 321. The quenching and tempering process develops the optimum in hardness for wear, toughness, compressive strength and machinability. USES...Use 4140PH steel for all types of dies on hand-operated and mechanically operated press brakes for the forming and bending of sheets, strip and other flat-rolled metallic and non-metallic materials. Many machine parts, requiring a steel with high mechanical properties, can be made from 4140PH. Back up and support tooling, dies holders, and short run stamping and bending dies all offer opportunities to utilize the unique pre-hardened yet machinable characteristics of 4140PH.

The data presented herein are typical values, and do not warrant suitability for any specific application or use of this material. Normal variations in the chemical composition, the size of the product, and heat treatment parameter may result in different values for the various physical and mechanical properties.

121

You might also like