Scribd
Upload
21K views

Cisco Packet Tracer Server and Client Configuration Help File

The document describes how to configure various servers and clients in Packet Tracer, including a DHCP server, DNS server, web server, mail server, and file server. It provides step-by-step instructions for configuring the servers and clients, and for verifying connectivity using tools like ping, a web browser, email, and FTP.

Uploaded by

Mahmoud Shuker
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
21K views

Cisco Packet Tracer Server and Client Configuration Help File

The document describes how to configure various servers and clients in Packet Tracer, including a DHCP server, DNS server, web server, mail server, and file server. It provides step-by-step instructions for configuring the servers and clients, and for verifying connectivity using tools like ping, a web browser, email, and FTP.

Uploaded by

Mahmoud Shuker
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 19

Packet Tracer Server and client

You can able to create these servers: HTTP /Web Server DNS Server DHCP Server Mail Server FTP server

P a g e |1

CreatedbySiddharthaRajbhatt,CRISP,Bhopal

Sample Topology

P a g e |2

CreatedbySiddharthaRajbhatt,CRISP,Bhopal

Step 1. Configure DHCP on the DHCP SERVER labeled Server.


Click the Server. The server configuration window opens, Click the Desktop tab. Click the button on the Top left for IP Configuration. Verify the Static is Radio button selected. Set the IP Address Like: IP Address:10.11.11.200 Subnet Mask: 255.0.0.0 DNS Sever: 10.11.11.201 Then close the Ip configuration window.

Click the Server. The server configuration window opens, Click the Config tab. The Global Settings appear. Click the button on the left for DHCP. Verify the service is on. Turn OFF other the Server services like: HTTP, FTP, AAA and Email. Set the DNS Server to like 10.11.11.201, Set the Start Ip Address to 10.11.11.100, Subnet Mask to 255.0.0.0 and Maximum Number of Users to 50 Click the Save button. Note: Dont Click on ADD Button.

P a g e |3

CreatedbySiddharthaRajbhatt,CRISP,Bhopal

Step 2. Configure DNS on the DNS SERVER labeled Server.


Click the Server. The server configuration window opens, Click the Desktop tab. Click the button on the Top left for IP Configuration. Verify the Static is Radio button selected. Set the IP Address Like: IP Address:10.11.11.201 Subnet Mask: 255.0.0.0 DNS Sever: 10.11.11.201 Then close the Ip configuration window. Click the Server. The server configuration window opens, Click the Config tab. The Global Settings appear. Click the button on the left for DNS. Verify the service is on. Turn OFF other the Server services like: HTTP, FTP, AAA and Email. Set the Domain Name to like www.example.com and the IP Address to10.11.11.202. Click the Add button. Additional domain names can be added in this fashion.

P a g e |4

CreatedbySiddharthaRajbhatt,CRISP,Bhopal

Additional domain names can be added in this fashion.

P a g e |5

CreatedbySiddharthaRajbhatt,CRISP,Bhopal

Step 3. Configure HTTP on the WEB Sever labeled Server.


Click the Server. The server configuration window opens, Click the Desktop tab. Click the button on the Top left for IP Configuration. Verify the Static is Radio button selected. Set the IP Address Like: IP Address:10.11.11.202 Subnet Mask: 255.0.0.0 DNS Sever: 10.11.11.201 Then close the Ip configuration window. Click the button to select HTTP. Turn the service On and Turn OFF other the Server services like: DNS, FTP, AAA and Email. The Default Page Content window contains the page that is displayed when a web page is requested from the server. This page is in HTML format. This page can be changed if you would like to customize it. Close the server configuration window.

ChangetheHTML codingaccording todomain

P a g e |6

CreatedbySiddharthaRajbhatt,CRISP,Bhopal

Step 4. Configure FTP on the Server (File SERVER).


Click the Server. The server configuration window opens, Click the Desktop tab. Click the button on the Top left for IP Configuration. Verify the Static is Radio button selected. Set the IP Address Like: IP Address:10.11.11.203 Subnet Mask: 255.0.0.0 DNS Sever: 10.11.11.201 Then close the Ip configuration window. Click the button to select FTP. Turn the service On and Turn OFF other the Server services like: HTTP, DNS, FTP, AAA and Email.

Set the User Name to user and Password to password. And set User Permissions like Write, Read, Rename and List. Click the Add(+) button.

P a g e |7

CreatedbySiddharthaRajbhatt,CRISP,Bhopal

Step 5. Configure Mail on the Server (MAIL SERVER).


Click the Server. The server configuration window opens, Click the Desktop tab. Click the button on the Top left for IP Configuration. Verify the Static is Radio button selected. Set the IP Address Like: IP Address:10.11.11.204 Subnet Mask: 255.0.0.0 DNS Sever: 10.11.11.201 Then close the Ip configuration window. Click the Server. The server configuration window opens, Click the Config tab. The Global Settings appear. Click the button on the left for Email. Verify the SMTP and POP3 services are on. Turn OFF other the Server services like: HTTP, FTP, AAA and DNS. Set the Domain Name to like example.com and then click the Set button. Now create some users like Ram, Shyam, Mohan, pc1, pc2, pc3 ect.. with some password. Click the Add(+) button

User Setup User Name cshod Pc1 Pc2 Pc3 Pc4 Password 123 123 123 123 123

P a g e |8

CreatedbySiddharthaRajbhatt,CRISP,Bhopal

Configure DNS support on the CS HOD labeled Client


Click the PC Client. The PC configuration window opens, Click the Config tab. Click the button on the Top left for IP Configuration. Verify the Static is Radio button selected. Set the IP Address Like: IP Address:10.11.11.99 Subnet Mask: 255.0.0.0 DNS Sever: 10.11.11.201 Then close the IP Configuration window.

Configure DNS support on the PC1, PC2, PC3 and PC4 labeled Clients Click the PC Client. The PC configuration window opens, Click the Config tab. Click the button on the Top left for IP Configuration. Verify the DHCP is Radio button selected.

P a g e |9

CreatedbySiddharthaRajbhatt,CRISP,Bhopal

Verify Connectivity in Real time Mode Step 1. Ping the server using the URL.
Select the PC and click the Desktop tab. Click the Command Prompt button. A Command Prompt window opens. Type ping www.example.com (the URL of the Server) and press Enter. After the ping succeeds, close the Command Prompt window.

P a g e |10

CreatedbySiddharthaRajbhatt,CRISP,Bhopal

Step 2. From the PC, Open a Web Page.


From the PC desktop, click the Web Browser button. A simulated web browser opens. Type www.example.com (the URL of the Server) into the URL box and click the Go button. A web page should appear. Close the PC configuration window.

P a g e |11

CreatedbySiddharthaRajbhatt,CRISP,Bhopal

Step 3. Configure Email support on the CS HOD, PC1, PC2, PC3 and PC4 labeled Clients
Click the PC Client. Click the Desktop tab. Click the button on E mail. The Configure Mail window opens.

Configure Mail User Information Your Name: Email Address: Server Information Income mail Server Outgoing mail Server Logon Information User Name: Password: Click the button on the Top Save. cshod 123 10.11.11.204 or 10.11.11.204 or mailserver (As per DSN Server) mailserver (As per DSN Server) cshod [email protected]

P a g e |12

CreatedbySiddharthaRajbhatt,CRISP,Bhopal


The Mail Browser window opens. Click the Compose button than create test mail. To: [email protected] Subject: test mail Massage: Hello Click the button Send.

P a g e |13

CreatedbySiddharthaRajbhatt,CRISP,Bhopal

Configure Email support on the PC1, PC2, PC3 and PC4 labeled Clients
Click the PC Client. Click the Desktop tab. Click the button on E mail. The Configure Mail window opens.

Configure Mail User Information Your Name: Email Address: Server Information Income mail Server Outgoing mail Server Logon Information User Name: Password: Click the button on the Top Save. pc1 123 10.11.11.204 or 10.11.11.204 or mailserver (As per DSN Server) mailserver (As per DSN Server) pc1 [email protected]

P a g e |14

CreatedbySiddharthaRajbhatt,CRISP,Bhopal

The Mail Browser window opens. Click the Receive button than find one test mail at mail box.
Dabble click on mail and open it and read it.

P a g e |15

CreatedbySiddharthaRajbhatt,CRISP,Bhopal

Step 4. Configure FTP support on the PC1, PC2, PC3 and PC4 labeled Clients
Click the CS HOD PC Client. Click the Desktop tab. Click the button on the Top Text Editor.

Create one test file and save that file with the name test. Close Text Editor. Click the Command Prompt button. A Command Prompt window opens. Type dir and verify file test.txt exist or not. Than Type ftp fileserver or ftp 10.11.11.203 (the URL of the file Server) and press Enter. After the ping succeeds, close the Command Prompt window.

P a g e |16

CreatedbySiddharthaRajbhatt,CRISP,Bhopal

Press Ctrl + C to exit ftp Prompt. Close the Command Prompt window.

P a g e |17

CreatedbySiddharthaRajbhatt,CRISP,Bhopal


Click the CS HOD PC Client. Click the Desktop tab. Click the Command Prompt button. A Command Prompt window opens. Type dir and verify file test.txt exist or not. Than Type ftp fileserver or ftp 10.11.11.203 (the URL of the file Server) and press Enter. After the ping succeeds, close the Command Prompt window.

P a g e |18

CreatedbySiddharthaRajbhatt,CRISP,Bhopal


Click the PC1 Client. Click the Desktop tab. Click the button on the Top Text Editor. Click the File Menu than Open. Click the file name then click ok.

P a g e |19

CreatedbySiddharthaRajbhatt,CRISP,Bhopal

You might also like