Basic Automobile Questions
Basic Automobile Questions
Time 10mints
1. CNG stands for a) Common Natural Gas b) Compressed Natural Gas c) Common Neutral Gas d) None of A, B, C 2. Diesel Engine is a) Spark Ignition type b) Compression Ignition Type c) None of A, B d) All of A, B 3. Clutch is used for a) Engaging power from Engine to Gear box. b) Disengaging power from Engine to Gear box. c) Engaging & disengaging power from Engine to Gear box. d) None 4. If Retarder is used a) Life of propeller shaft will increase b) Life of Brake lining and Brake drum will increase c) Life of Brake lining and Brake drum will decrease. d) Life of gear box will increase 5. ABS stands for a) Anti lock brake system b) Auto brake system c) Anti brake service d) None of A, B, C 6. Advantages of Power steering are a) To increase driver's comfort, by reducing steering effort. b) To prevent vehicle from pulling one side, incase of front tyre getting punctured. c) All of A,B d) None 7. Function of Thermostat in cooling system a) To attain engine working temperature quickly b) To maintain engine working temperature range c) All of 1 & 2 d) None 8. Main constituent of natural gas a) Ethane b) Ethene c) Methane d) Propane
9. Differential is used a) To help vehicle in turning. b) To increase the power c) To increase the intial torque d) None 10. Function of gearbox a) To change the engine power b) To change the vehicle power c) To Change the engine speed and torque d) To change the vehicle speed and torque. 11. An engine with the camshaft in the block operates the valves through a) Valve Tappets b) Push rods c) Rocker arms d) All of the above 12. Firing order of a six cylinder Engine is a) 1-3-2-5-6-4 b) 1-4-3-5-6-2 c) 1-2-3-4-5-6 d) 1-5-3-6-2-4 13. Which valve size is bigger between intake and exhaust valves? a) Intake b) Exhaust c) Both Equal d) None 14. The function of the piston ring is to (a) To form a seal to prevent blow-by (b) To allow heat flow from the piston crown to the cylinder walls (c) To maintain lubricating oil on the cylinder wall (d) All of the above 15. The number of rings used in automobile engine is (a) One oil control ring only (b) One oil control ring and two compression rings (c) Two oil control rings and one compression ring (d) One compression ring only