Toad Data Modeler 4.

2
Installation Guide

 2012 Quest Software, Inc. ALL RIGHTS RESERVED. This guide contains proprietary information protected by copyright. The software described in this guide is furnished under a software license or nondisclosure agreement. This software may be used or copied only in accordance with the terms of the applicable agreement. No part of this guide may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording for any purpose other than the purchasers personal use without the written permission of Quest Software, Inc. The information in this document is provided in connection with Quest products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Quest products. EXCEPT AS SET FORTH IN QUEST'S TERMS AND CONDITIONS AS SPECIFIED IN THE LICENSE AGREEMENT FOR THIS PRODUCT, QUEST ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. IN NO EVENT SHALL QUEST BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF QUEST HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Quest makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Quest does not make any commitment to update the information contained in this document. If you have any questions regarding your potential use of this material, contact: Quest Software World Headquarters LEGAL Dept 5 Polaris Way Aliso Viejo, CA 92656 email: [email protected] Refer to our Web site (www.quest.com) for regional and international office information. Trademarks Quest, Quest Software, the Quest Software logo, Toad, T.O.A.D., Toad World are trademarks and registered trademarks of Quest Software, Inc in the United States of America and other countries. For a complete list of Quest Softwares trademarks, please see http://www.quest.com/legal/trademarks.aspx. Other trademarks and registered trademarks are property of their respective owners. Toad Data Modeler 4.2 Installation Guide

Table of Contents
Introduction
Notes before Installation:

3
3

System Requirements Virtualization Support Supported Database Platforms First Installation (Clean Install) Upgrade Side-by-Side Installation Silent Installation
Shortcuts Database Platforms

4 4 6 8 10 11 12
13 13

Un-Installation Trial Version Information

Functionality Restrictions:

16 17
17

Default Locations 1. After Toad Data Modeler is installed 2. After you run Toad Data Modeler Appendix: Contact Quest Contact Quest Support Contact Quest Software About Quest Software Index

18 18 19 21 21 21 21 23

1
Introduction
Open and unzip the installation package that contains:
l l l

Installation file (MSI) Release Notes file (HTML) Installation Guide file (PDF)

Notes before Installation:

1. If you have installed any version of Toad Data Modeler (TDM) using the TDM stand alone installer and run any of the Toad bundles that contain Toad Data Modeler, the Quest Installer will display incorrectly that Toad Data Modeler has not been installed. 2. Installing features for Toad Data Modeler: During the initial installation of Toad Data Modeler you have the option to install support for the various database platforms, using the new 'Features' functionality within the Quest Installer (QI). If you want to add new features (after TDM is already installed), you must do so from the Control Panel via the Add or Remove Programs section in your operating system. 3. To install Toad Data Modeler successfully, Administrator privileges are necessary. 4. Toad Data Modeler supports side-by-side installation.
l

Upgrade New version of Toad Data Modeler is installed to the same folder where previous version was installed. Side-by-side Installation - New version of Toad Data Modeler is installed to another location.

5. Limitations of trial version: 15 - day trial period and multiple features limited to a maximum of 25 entities. 6. Do NOT open and resave models originally created in a developmentally higher version of Toad Data Modeler (e.g. in v. 4.2.3) in lower version of Toad Data Modeler (e.g. in v. 3.5.10). 7. Note for users of Toad Data Modeler BETA: BETA uses different folders for configuration files and other default directories than Toad Data Modeler Commercial version. You can install and use both versions on one computer.

2
System Requirements
Before installing Toad Data Modeler, ensure your system meets the following minimum hardware and software requirements: Minimal Requirements Platform Pentium IV Optimal

Pentium dual core 4 GB 400 MB

Memory Hard Disk Space Operating System

512 MB 200 MB

Microsoft Windows XP (32-bit or 64-bit, Servise Pack 2) Microsoft Windows Vista (32-bit or 64-bit) Microsoft Windows Server 2003 (32-bit or 64-bit, Servise Pack 2) Microsoft Windows Server 2008 (32-bit or 64-bit) Microsoft Windows Server 2008 R2 (64-bit) Microsoft Windows 7 (32-bit or 64-bit

Virtualization Support
Before installing Toad Data Modeler, review the following for virtualization support: Application Virtualization Desktop Virtualization (VDI) Toad Data Modeler has been tested for Citrix support on Windows XP using the XenApps 5.0 Server. Toad Data Modeler has been tested with the following: Quest vWorkspace 7.0 running on Windows XP (32-bit) Note: Problem during print on virtual printer - The problem occurs only in case of print from local machine (all printers from local machine are visible on vWorkspace). If the virtual printer is installed on vWorkspace directly, the problem doesn't occur.

Toad Data Modeler Installation Guide System Requirements

Server Virtualization

Toad Data Modeler has been tested with VMware Server 2 running on Windows 7.

3
Supported Database Platforms
Toad Data Modeler supports the following database platforms: Supported Database System Reverse Engineering Import From SQL File Alter Script Generation SQL/DDL Code Generation

DB2 z/OS v. 10 DB2 z/OS v. 9 DB2 v. 9.7 (LUW) DB2 v. 9.5 (LUW) DB2 v. 9 (LUW) DB2 UDB v. 8 (LUW) Ingres 10.0 Ingres 9.3 Microsoft Access 2007/2010 Microsoft Access 2000-2003 MicrosoftSQLAzure Microsoft SQL Server 2012 Microsoft SQL Server 2008 Microsoft SQL Server 2005 Microsoft SQL Server 2000

Toad Data Modeler Installation Guide Supported Database Platforms

Supported Database System

Reverse Engineering

Import From SQL File

Alter Script Generation

SQL/DDL Code Generation

MySQL 5.5 MySQL 5.1 MySQL 5.0 Oracle 11g R2 Oracle 11g R1 Oracle 10g Oracle 9i PostgreSQL 9.1 PostgreSQL 9.0 PostgreSQL 8.4 PostgreSQL 8.3 PostgreSQL 8.2 PostgreSQL 8.1 SQLite 3.7 Sybase ASE 15.7 Sybase ASE 15.5 Sybase ASE 15 Sybase ASE 12.5 Sybase IQ 15.2 Sybase SQL Anywhere 11 Teradata 13 Other databases (Universal Model)

4
First Installation (Clean Install)
1. Run the Toad Data Modeler Setup Wizard and go through the installation process. Default path where Toad Data Modeler is installed: C:\Program Files\Quest Software\Toad Data Modeler 4.2 2. Select what features (support for various database systems) you want to install. 3. In the end of the installation process, select Run Toad Data Modeler and click Finish. Note: Toad Data Modeler allows side-by-side installation. Although this is your first installation, Toad Data Modeler needs to create a new Installation folder where configuration settings and other files will be saved. Therefore, the following dialog will occur. Only New Configuration option is available. Click OK.

4. Name the Installation folder. Standard Installation is a default name. Confirm OK.

Toad Data Modeler Installation Guide First Installation (Clean Install)

5. Toad Data Modeler opens in a trial mode.If you have obtained your commercial key, click Enter Commercial Key and enter your license key. Note: After you install Toad Data Modeler, a new installation folder will be created in your Documents and Settings directory Standard Installation.

5
Upgrade
If you select this installation method, it means that:
l

You had Toad Data Modeler installed on your computer (v. 3.5.x or previous) and uninstalled it before the new version installation. OR You did not uninstall previous version and still have Toad Data Modeler (v. 3.5.x or previous) installed on your computer.

You install the new version to the same location where the previous version is.

Steps: 1. Run the Toad Data Modeler Setup Wizard and go through the installation process. Default path where Toad Data Modeler is installed: C:\Program Files\Quest Software\Toad Data Modeler 4.2 Note: earlier versions were installed to C:\Program Files\Quest Software\Toad Data Modeler 3 folder 2. Select what features (support for various database systems) you want to install. 3. In the end of the installation process, select Run Toad Data Modeler and click Finish. 4. Select either new configuration or configuration settings of previous version and click OK.

6
Side-by-Side Installation
If you select this installation method, it means that:
l

You already have Toad Data Modeler installed on your computer (v. 3.5.x or previous). You do not uninstall this old version. You install the new version to a new location.

Steps: 1. Run the Toad Data Modeler Setup Wizard and go through the installation process. 2. In step Destination Folder, define a new path where the new Toad Data Modeler version should be installed. 3. Continue the installation process and select what features (support for various database systems) you want to install. 4. Select either new configuration or configuration settings of previous version and click OK. For new configuration settings, define a new name for the Installation folder. Standard Installation is a default name. Confirm OK.

5. Toad Data Modeler opens in a trial mode. If you are a holder of a permanent license key, click Enter Commercial Key and enter your license key information from previous Toad Data Modeler version (see e.g. the Help menu | Licensing). Note: You will not have to enter your commercial key again if you use Microsoft Windows Vista or Microsoft Windows 7 OS.

7
Silent Installation
To perform a silent installation of Toad Data Modeler, you must have the setup.MSI file for Toad Data Modeler. This MSI is then used with the installation variable to define the installation options. The argument for the silent installation from a command line is /q. To specify a directory where Toad Data Modeler should be installed, it is possible to use INSTALLDIR=PATH . (Otherwise, the default path will be used.) Example: setup.msi /q INSTALLDIR="C:\Program Files\Quest Software\Toad Data Modeler 4.2\" In order to specify for which database platform Toad Data Modeler should be installed or which shortcuts should be created and where, use the parameter ADDLOCAL. If this parameter is not used, default installation will be performed. Example: setup.msi /q INSTALLDIR="C:\Program Files\Quest Software\Toad Data Modeler 4.2\" ADDLOCAL=Complete,XPMANIFEST,SUPPORTDATABASES,SHORTCUTUNINSTALL, SHORTCUTDESKTOP,SHORTCUTSTARTMENU,SHORTCUTQUICKLAUNCH, SHORTCUTHELP,POSTGRESQL,POSTGRESQL81,POSTGRESQL82 Provided that you use the parameter ADDLOCAL , always select the options Complete, XPMANIFEST, SUPPORTDATABASES. These three options are obligatory for the correct installation. During installation of support for particular database platform, it is necessary to install basic support for the selected database platform. Example: For successful installation of support for Oracle 10g database, Oracle must be selected too.

Toad Data Modeler Installation Guide Silent Installation

13

Shortcuts
SHORTCUTUNINSTALL Creates a shortcut for uninstall in Start Menu. Creates a shortcut for Toad Data Modeler on desktop. Creates a shortcut for Toad Data Modeler in Start Menu. Creates a shortcut for Toad Data Modeler in Quick Launch bar. Creates a shortcut for Help file, User Manual and Reference Guide in Start Menu.

SHORTCUTDESKTOP

SHORTCUTSTARTMENU

SHORTCUTQUICKLAUNCH

SHORTCUTHELP

Database Platforms
DB2 (LUW) DB2 - Basic support for DB2 (LUW) DB2UDBv8 - Support for DB2 UDB 8 (LUW) DB2v9 - Support for DB2 9 (LUW) DB2v95 - Support for DB2 9.5 (LUW) DB2v9.7 - Support for DB2 9.7 (LUW) DB2 zOS DB2zOSv9 - Support for DB2 zOS v. 9 DB2zOSv10 - Support for DB2 zOS v. 10 Ingres INGRES - Basic support for Ingres INGRES93 - Support for Ingres 9.3 INGRES10 - Support for Ingres 10.0 Microsoft Access MSACCESS - Basic support for MS Access MSACCESS_2000_2003 - Support for Microsoft Access 2000/2002/2003

Toad Data Modeler Installation Guide Silent Installation

14

MSACCESS_2007_2010 - Support for Microsoft Access 2007/2010 Microsoft SQLAzure MSSQL_AZURE - Support for Microsoft SQL Azure Microsoft SQL Server MSSQL - Basic support for Microsoft SQL Server MSSQL2000 - Support for Microsoft SQL 2000 MSSQL2005 - Support for Microsoft SQL 2005 MSSQL2008 - Support for Microsoft SQL 2008 MSSQL2012 - Support for Microsoft SQL 2012 MySQL MYSQL - Basic support for MySQL MYSQL50 - Support for MySQL 5.0 MySQL51 - Support for MySQL 5.1 MySQL55 - Support for MySQL 5.5 Oracle ORACLE - Basic support for Oracle ORACLE_9 - Support for Oracle 9i ORACLE_10G - Support for Oracle 10G ORACLE_11G_R1 - Support for Oracle 11G ORACLE_11G_R2 - Support for Oracle 11G R2 PostgreSQL POSTGRESQL - Basic support for PostgreSQL POSTGRESQL81 - Support for PostgreSQL 8.1 POSTGRESQL82 - Support for PostgreSQL 8.2 POSTGRESQL83 - Support for PostgreSQL 8.3 POSTGRESQL84 - Support for PostgreSQL 8.4 POSTGRESQL90 - Support for PostgreSQL 9.0 POSTGRESQL91 - Support for PostgreSQL 9.1 SQLite

Toad Data Modeler Installation Guide Silent Installation

15

SQLITE37 - Support for SQLite 3.7 Sybase ASE SYBASE - Basic support for Sybase ASE SYBASE12.5 - Support for Sybase ASE 12.5 SYBASE15 - Support for Sybase ASE 15 SYBASE15.5 - Support for Sybase ASE 15.5 SYBASE15.7 - Support for Sybase ASE 15.7 Sybase IQ SYBASEIQ15.2 - Support for Sybase IQ 15.2 Sybase SQLAnywhere SYBASE_SQL_ANYWHERE_11 - Support for Sybase SQL Anywhere 11 Teradata TERADATA130 - Support for Teradata 13 Universal Database UNIVERSAL_DATABASE - Support for universal database platforms Other parameters for silent installs can be found after you set the setup.msi ? command.

8
Un-Installation
To uninstall Toad Data Modeler, you must do so from the Control Panel | Add or remove programs (Windows XP) or Programs & Features (Windows Vista and Windows 7). Note: All user files remain preserved after the un-installation. You can find them at: C:\Documents and Settings\user name\My Documents\Toad Data Modeler; and configuration files at: C:\Documents and Settings\user name\Application Data\Quest Software\Toad Data Modeler. For complete un-install (which means you will lose all your models, generated scripts, reports, Version Manager etc.), delete these folders too.

9
Trial Version Information
Limitations of Trial Version:
l l

15 day trial period, 25 entity limit for the following functionalities (the restrictions relate to both physical and logical models):

Note: To use Toad Data Modeler without these restrictions, please contact your Quest Sales Representative at [email protected] to request a full functionality trial override key.

Functionality Restrictions:
l l l l l

Save Model You can save a model with max 25 entities. Preview - You can preview a model with max 25 entities. Print You can print a model with max 25 entities. Export to Graphic File You can export a model with max 25 entities to graphic file. SQL/DDL Script Generation You can generate SQL/DDL script only for first 25 entities of the model. Other objects (procedures, functions etc.) dont have any limitation. Report - You can generate HTML/RTF/PDF report for a model with max 25 entities. Alter Report You can generate alter report for a model with max 25 entities. XSL Transformation Report You can generate the XSL Transformation report only for first 25 entities of the model. Other objects (procedures, functions etc.) dont have any limitation.

l l l

First run of Toad Data Modeler: Toad Data Modeler opens in a trial mode. Trial period is 15 days. During this time, you can evaluate the software. Click Continue Evaluation to open the Toad Data Modeler Trial version. Click Purchase Commercial Key to be directed to the Quest Software website. Click Enter Commercial Key to enter your license key. 15-day trial period has expired: After the 15-day trial period has expired, you can either purchase a commercial key or request a trial extension. Click Request Trial Extension to evaluate Toad Data Modeler for another trial period. Click Purchase Commercial Key to be directed to the Quest Software website. Click Enter Commercial Key to enter your license key.

10
Default Locations
As Toad Data Modeler supports side-by-side installation, there are two folders: Installation #
l

Default path: C:\Documents and Settings\user name\Application Data\Quest Software\Toad Data Modeler\Installation #. The number of installation is increasing with every new installation. In this folder, configuration files and Version Manager files are stored.

l l

Standard Installation (or <name> installation that you define)

l

Default path: C:\Documents and Settings\user name\My Documents\Toad Data Modeler\Standard Installation In this folder, aliases, models, naming conventions, user packages, user OTPs, styles and XSL files are stored.

In this location: C:\Documents and Settings\user name\My Documents\Toad Data Modeler, there are GeneratedScripts, Logs and Reports folders (folders for outputs) and the new Standard Installation folder where users files are stored.

1. After Toad Data Modeler is installed

Toad Data Modeler application is installed to: C:\Program Files\Quest Software\Toad Data Modeler 4.2. Here, the following directories can be found: BIN In this directory, particularly the TDM.exe and Support.xml file containing list of supported database systems are stored. Libraries for reverse engineering of particular databases (*.dll files) are stored here too. Configs Config files with default settings and default layout of Toad Data Modeler are stored here (TDM.txe and .txd files). Documents Directory with documentation to Toad Data Modeler User Guide, Help file, Reference Guide, License Agreement and Third Party License. Naming Conventions Directory with .csv files that can be imported and used in glossaries for naming conventions in Toad Data Modeler.

Toad Data Modeler Installation Guide Default Locations

19

Packages System packages and metamodels are stored in System subdirectory. Default My Package and Templates package are stored in User subdirectory. Samples Directory with sample Toad Data Modeler models. Selected OTPs Directory with .txo files for each supported database platform and logical model, containing Default (System) Selected Object Types and Properties. Styles Default CSS styles for report generation. Version Manager Definitional files for Version Manager. XSL Directory with .xslt files - templates for XSL transformation. Release Notes document Document with information on the product release.

2. After you run Toad Data Modeler

After you run the application, new directories will be created in your Documents and Settings directory. The files that you can modify will be copied to these directories. (From C:\Program Files\Quest Software\Toad Data Modeler 4.2). All changes you make in the files (e.g. changes in the application layout, new aliases, modified styles in reports, new default path to generated SQL/DDL code, modified My Package.txg file etc.) will be saved in your Documents and Settings directory and will be preserved when you update the application. If you need to restore the original default settings, you can simply delete appropriate file in the Documents and Settings directory. When you run Toad Data Modeler then, appropriate original default file from C:\Program Files\Quest Software\Toad Data Modeler 4.2 will be copied to the Documents and Settings directory again. You will find the user files in the following locations: 1. C:\Documents and Settings\user name\Application Data\Quest Software\Toad Data Modeler\Installation # Here, Configs and Version Manager directories can be found. Note: The number of installation will be increasing with every new installation. Configs Config files with settings of Toad Data Modeler and TDM.txe file with the

Toad Data Modeler Installation Guide Default Locations

20

application environment (layout) are stored here. Version Manager Structure that you create in Version Manager is saved here. 2. C:\Documents and Settings\user name\My Documents\Toad Data Modeler\ Installation name Here, the following directories are created: Aliases Aliases you create and save during reverse engineering. Models Default path for physical and logical models you create in Toad Data Modeler. Naming Conventions Directory with naming convention definitions (.txn files) that you create in Toad Data Modeler. Packages Directory with metamodels and packages (.txg files). User packages - My Package and add-ons are stored here, including the Templates.txg package. Selected OTPs Directory with User Selected Object Types and Properties. Styles Default path to CSS styles for reports. XSL Directory where user .xslt files for XSL transformation are stored. 3. C:\Documents and Settings\user name\My Documents\Toad Data Modeler Here, the following directories are created: Generated Scripts Directory where DDL/SQL script and alter scripts are generated. Reports Directory where HTML, RTF reports, PDF and XSLT outputs are generated.

11
Appendix: Contact Quest
Contact Quest Support
Quest Support is available to customers who have a trial version of a Quest product or who have purchased a Quest product and have a valid maintenance contract. Quest Support provides unlimited 24x7 access to Support Portal at www.quest.com/support. From our Support Portal, you can do the following:
l l l

Retrieve thousands of solutions from our online Knowledge Base Download the latest releases and service packs Create, update and review Support cases

View the Global Support Guide for a detailed explanation of support programs, online services, contact information, policies and procedures. The guide is available at: www.quest.com/support.

Contact Quest Software

Email [email protected] Quest Software, Inc. World Headquarters Mail 5 Polaris Way Aliso Viejo, CA 92656 USA Web site www.quest.com

See our web site for regional and international office information.

About Quest Software

Quest Software simplifies and reduces the cost of managing IT for more than 100,000 customers worldwide. Our innovative solutions make solving the toughest IT management problems easier, enabling customers to save time and money across physical, virtual and cloud environments. For more information about Quest go to www.quest.com. Established in 1987, Quest Software (Nasdaq: QSFT) provides simple and innovative IT management solutions that enable more than 100,000 global customers to save time and money

Toad Data Modeler Installation Guide Appendix: Contact Quest

22

across physical and virtual environments. Quest products solve complex IT challenges ranging from database management, data protection, identity and access management, monitoring, user workspace management to Windows management. For more information, visit www.quest.com.

Index
A after toad data modeler is installed after toad data modeler is run B before installation notes C citrix support D default locations F first installation O operating systems S side-by-side installation silent installation supported database platforms system requirements T trial period expired trial version limitations U upgrade V virtualization 4 10 17 17 11 12 6 4 4 8 18 4 3 18 19