Goulds 3186
High-temperature/Pressure Paper Stock/ Process Pumps
Goulds 3186
Goulds 3186
Designed to Handle High Temperature and High Pressure Services of the Pulp & Paper Industries
N N N N
Capacities to 3000 m 3/h (13,000 GPM) Heads to 125 m (410 feet) Temperatures to 300C (508F) Pressures to 25 bar (360 PSIG)
N N N N
Design Features
ISO or JIS 40 bar flange drilling mm-dimensioned O.D. of mechanical seal sleeve mm-dimensioned bearing locknut mm-dimensioned coupling extension
N
Hydraulic Coverage Line designed for full 50/60 Hz performance. Back Pull-out Construction Spacer type coupling allows one-craft maintenance. Centerline Supported High temperature stability. Labyrinth Seals Eliminate loss of lubricant, prevent lubricant contamination for maximum bearing life. Maximum Interchangeability Power end and impellers completely interchangeable with Goulds Model 3185. International Design Metric fasteners and fittings used throughout.
N N
Services
Digester recirculation Make-up liquor White liquor Black liquor High pressure/high temperature pulp mill services Hot oil
Goulds 3186
Model 3186
CASING
N End suction, top centerline discharge, self-venting. N Centerline mounted for high temperature services. N Back pull-out design.
ENCLOSED IMPELLER
High-efficiency design. Large balance holes and back pump-out vanes minimize stuffing box pressure and axial thrust. Standard with casing and impeller wear rings.
LABYRINTH SEALS
Inpro VBXXD labyrinth isolators prevent premature bearing failure caused by lubricant contamination and/or loss of lubricant.
TAPERBORE PLUS SEAL CHAMBER
Oversized tapered bore seal chamber improves circulation and cooling at seal faces, eliminates solids build-up in chamber for longer seal life. Standard with mechanical seal arrangement.
CONTINUOUS HIGHPERFORMANCE
Original highefficiency maintained by simple external impeller adjustment resulting in longterm energy savings.
DRY SHAFT
Teflon* O-rings in impeller nut and shaft sleeve assure positive sealing of shaft from pumpage.
CONFINED SPIRAL-WOUND GASKET
Spiral-wound stainless steel, provides metalto-metal fit between casing and cover.
* E.I. DuPont Reg. Trademark
CASING AND IMPELLER WEAR RINGS
Renewable wear rings minimize maintenance costs. Fastened by set screws.
Goulds 3186
Performance Features for Extended Pump Life
LABYRINTH SEALS
Inpro VBXXD labyrinth isolators are standard. Prevent premature bearing failure caused by lubricant contamination or loss of oil.
Relative Life of Bearing Housing Protection Devices
60
Design Life, X 1000h
Infinite
50 40 30 20 10 0 Single Lip Seal Magnetic Seal Bearing Lower Range Bearing Upper Range Labyrinth
TAPERBORE PLUS SEAL CHAMBER
Enlarged, tapered bore for increased life of mechanical seals through improved lubrication and cooling. Self-venting and draining. VPE ring is optional.
CENTERLINE SUPPORTED
For high temperature services. Eliminates misalignment of pump and motor shafts due to thermal expansion of casing.
HEAVY DUTY SHAFT/BEARINGS
Shaft designed for minimum deflection for long seal life and bearing life. Bearings sized for optimum life under tough conditions.
ENCLOSED IMPELLER
High efficiency design. Large balance holes and back pump-out vanes reduce axial thrust and stuffing box pressure.
Goulds 3186
Features for Ease of Maintenance
1. BACK PULL-OUT
Allows unit to be removed without disturbing suction and discharge piping. Simple and fast installation of spare power end.
2. EXTERNAL IMPELLER ADJUSTMENT
Easy renewal of impeller clearances to maintain original hydraulic performance. Accomplished on-site with minimum downtime.
3. CONDITION MONITORING SITES
Allow easy and consistent monitoring of temperature and vibration for preventive maintenance.
1.
4. MAXIMUM STUFFING BOX/SEAL CHAMBER ACCESSIBILITY
Allows easy maintenance of packing or mechanical seal.
MAXIMUM INTERCHANGEABILITY
The 3181 utilizes the same power ends as Goulds Model 3180 for reduced spare parts inventory requirements.
2.
3.
4.
Goulds 3186
Hydraulic Coverage Charts
200
1470 RPM
1470 RPM 960 RPM
250x200-480
100 90 80 70
200x150-400 150x100-480
250x150-550 300x250550 250x150-480 250x 200-480 300x250480 250x200-400
TOTAL HEAD METERS
60 50 40 90 80 70 60 50 40 30 150x100-400
350x300550
350x300480
150x80-350 150x100350 200x200-350 250x250350
300x 250-400 350x350400 400x350-550 (960 RPM)
200x150-350
20 60 70 80 90100 200 300 400 500 600 800 1000 2000 3000 4000 5000
CAPACITY m3/h
600 500 400 150x100-480 300 150x100-400 200 250x150-480
1780 RPM
200x150-400 250x200-400 250x200-480
1780 RPM 1180 RPM
300x250-550 (1180 RPM) 10 x 12-16
12x14-22 (1180 RPM)
TOTAL HEAD FEET
150x80-350
150x100350 200x150350 200x200350 250x250350 12x14-19 (1180 RPM) 14x4-16 (1180 RPM)
100 90 80 70 60 50 40 30 250x150-550 (1180 RPM)
250x200-550 300x250-480 (1180 RPM) (1180 RPM)
14x16-22 (1180 RPM)
20 30 40 50 60 70 80 1000 2000 3000 5000 8000 10000 20000 30000
GALLONS PER MINUTE
Goulds 3186
Sectional View
100 202 112 136 332A 101 122 178 304 134A 496 409 228 353 127
Optional Packed Stuffing Box
412A
412F 126
107
106
184
105
333A
184A
351
Parts List and Materials of Construction
Material
Item Number 100 101 105 106 107 112 122 126 127 134A 136 178 184A 184 202 228 304 332A 333A 351 353 409 412A 412F 496 Part Name Casing Impeller Lantern Ring Packing Gland Thrust Bearing Shaft Shaft Sleeve Casing Wear Ring Bearing Housing Bearing Locknut and Lockwasher Impeller Key TaperboreTM Seal Chamber (Mechanical Seal) Stuffing Box Cover (Packed Box) Impeller Wear Ring Bearing Frame Impeller Nut Labyrinth Oil Seal (Outboard) Labyrinth Oil Seal (Inboard) Casing Gasket Mechanical Seal Radial Bearing Impeller O-Ring Sleeve O-Ring Bearing Housing O-Ring Duplex Duplex Duplex Duplex Duplex 316 SS 316 SS Cast Iron Steel Carbon Steel 316 SS 316 SS 316 SS Cast Iron 316 SS Bronze with Viton O-Rings Bronze with Viton O-Rings Spiral Wound Stainless Steel (As Required) Cylindrical Roller Teflon Teflon Buna Rubber 317 SS 317 SS 317 SS 317 SS Duplex Duplex (A890 GR3A) Duplex Duplex 316 Stainless Steel 316 SS 316 SS Teflon Lattice Braid Garfite Yarn (Impregnated with Garfite 200) 316 SS Duplex Angular Contact Carbon Steel (4340) 317 SS 317 SS 317 SS 317 Stainless Steel 317 SS 317 SS
Goulds 3186
Modular Interchangeability
Power End* Stuffing Box/ Seal Chamber Impeller and Wear Rings Casing Size
150 x 80 350 S Group 150 x 100 350 150 x 100 400 200 x 150 350 200 x 200 350 M Group 250 x 250 350 200 x 150 400 150 x 100 480 250 x 200 400 300 x 250400 350 x 350400 250 x 150 480 L Group 250 x 200480 300 x 250480 250 x 150550 250 x 200550 350 x 300480 XL Group 300 x 250550 350 x 300550 400 x 350550
* Shafts for Models 3181 and 3186 are not interchangeable. Sleeves for mechanical seals on the 3181 and 3186 are not interchangeable.
Visit our website at www.gouldspumps.com
Form B3186 5/06
2006 Goulds Pumps, Incorporated A subsidiary of ITT Industries, Inc.
