Scribd
Upload
699 views

Lube Additive Calculations

The document discusses calculations for determining additive weight and volume percentages based on density, as well as formulas for calculating gross and net additive treating costs per gallon based on additive cost, volume percentage, base oil cost, and freight. Example calculations are shown for determining a 4.11% additive weight from a 3.9% volume and a 4.79% volume from a 5% weight. Cost calculations demonstrate determining a $1.136/gal gross and $0.970/gal net cost for a 6.7% volume additive at $16.84/gal, with base oil at $2.50/gal and freight at $0.25/gal.

Uploaded by

Jake Neubauer
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
699 views

Lube Additive Calculations

The document discusses calculations for determining additive weight and volume percentages based on density, as well as formulas for calculating gross and net additive treating costs per gallon based on additive cost, volume percentage, base oil cost, and freight. Example calculations are shown for determining a 4.11% additive weight from a 3.9% volume and a 4.79% volume from a 5% weight. Cost calculations demonstrate determining a $1.136/gal gross and $0.970/gal net cost for a 6.7% volume additive at $16.84/gal, with base oil at $2.50/gal and freight at $0.25/gal.

Uploaded by

Jake Neubauer
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

Weight & Volume Calculations Calculate Additive Weight %

Additive Density (lb/gal) = Finished Oil Density (lb/gal) = Additive Volume % = Additive Weight % = 7.51 7.1512 3.9% 4.11%

Calculate Additive Volume %


Additive Density (lb/gal) = Finished Oil Density (lb/gal) = Additive Weight % = Additive Volume % = 7.51 7.2 5.0% 4.79%

Formula Used: Additive (wt %) = Additive Density (lb/gal) x Additive (vol%) Finished Oil Density (lb/gal)

Formula Used: Additive (vol%) = Finished Oil Density (lb/gal) x Additive (wt%) Additive Density (lb/gal)

Additive Treating Cost Calculations Additive Treating Cost


Additive cost ($/gal) = Additive Volume % = Base Oil Cost ($/gal) = Freight ($/gal) = Gross Additive Treating Cost (GATC) = Net Additive Treating Cost (NATC) = GATC w/Freight (GATCF) = NATC w/Freight (NATCF) = $16.84 6.7% $2.50 $0.25 $1.120 $0.954 $1.136 $0.970 /gal /gal /gal /gal /gal /gal /gal

Enter known values into the aqua cells.

Formulas Used: GATC ($/gal) = Additive Cost ($/gal) x Additive Vol% 100 NATC ($/gal) = [Additive Cost ($/gal) - Base Oil Cost ($/gal)] x Additive Vol% 100 GATCF ($/gal) = [Additive Cost ($/gal) + Freight ($/gal)] x Additive Vol% 100 NATCF ($/gal) = [Additive Cost ($/gal) -Base Oil Cost ($/gal) + Freight ($/gal)] x Additive Vol% 100

You might also like