Scribd
Upload
136 views

Manhole Analysis

This document provides specifications for a 30 meter tall palm tree pole design with an integrated manhole. Key details include: - The pole is round with a base diameter of 1285 mm, top diameter of 825 mm, and length of 26.5 meters. - The manhole is located 600 mm from the bottom and has an inside diameter of 1267 mm and thickness of 10 mm. - Material properties and structural calculations are provided to verify the design meets minimum requirements for area, moment of inertia, section modulus and buckling resistance.

Uploaded by

Saswati Mohanty
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
136 views

Manhole Analysis

This document provides specifications for a 30 meter tall palm tree pole design with an integrated manhole. Key details include: - The pole is round with a base diameter of 1285 mm, top diameter of 825 mm, and length of 26.5 meters. - The manhole is located 600 mm from the bottom and has an inside diameter of 1267 mm and thickness of 10 mm. - Material properties and structural calculations are provided to verify the design meets minimum requirements for area, moment of inertia, section modulus and buckling resistance.

Uploaded by

Saswati Mohanty
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

______________________________________________________

MANHOLE ANALYSIS AND DESIGN


______________________________________________________
PROJECT

Palm Tree Design-30 Mtr

POLE
Shape
Base Diameter
Top Diameter
Length
Taper
Manhole location
Diam at Bottom of Manhole
Diam at Top of Manhole

ROUND
1285 mm
825 mm
26.5 m
17.358 mm/m
600 mm
1275 mm
1258 mm

Diam @ Manhole Location =


Pole Thickness @ Manhole Location =
Material =

MANHOLE
___________

49.86 in
0.39 in
50.00 Ksi

Size (Width x Height) =


Stiffener Thickness =
Material =
Outside Width =
Inside Width =
Double Plate (Thickness x Width) =
Material =

1267 mm
10 mm
355 MPa

530
20.87
1.18
50
0.00

mm x
in x
in
Ksi
in

930
36.61
30.00
355
0

mm
in
mm
MPa
mm

5.12
1.8
45.0
36

in
in x
mm x
Ksi

130
5.1
130
250

mm
in
mm
MPa

PROPERTIES
___________
Minimum
Requirement

Area (in2)

Pole With
Handhole

CHECK

61.81

63.32

OK

Mom. Inertia Ix (in4)

8509.33

15115.02

OK

Mom. Inertia Iy (in4)

8509.33

15585.78

OK

Sect. Modulus Sy (in3)

341.31

606.27

OK

1/(KL/r)

0.0093

0.0391

OK

You might also like