Scribd
Upload
10K views

Title: Multiplexer Instruction Aims

The document provides instructions for 3 experiments on multiplexers. Trainees are tasked with designing the function and constructing the internal circuitry of 2-line, 4-line, and 8-line multiplexers. The experiments utilize breadboards, power supplies, ICs including 7408, 7432, 7404, and 74151, LEDs, and jumper wires. Truth tables are provided to test the multiplexer inputs and outputs by setting switches and recording the LED indications.

Uploaded by

suv_fame
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
10K views

Title: Multiplexer Instruction Aims

The document provides instructions for 3 experiments on multiplexers. Trainees are tasked with designing the function and constructing the internal circuitry of 2-line, 4-line, and 8-line multiplexers. The experiments utilize breadboards, power supplies, ICs including 7408, 7432, 7404, and 74151, LEDs, and jumper wires. Truth tables are provided to test the multiplexer inputs and outputs by setting switches and recording the LED indications.

Uploaded by

suv_fame
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 5

TITLE : MULTIPLEXER

INSTRUCTION AIMS:

The trainees must be able to

1. Design function of Multiplexer


2. Donstruct the internal circuitry of Multiplexer

TOOLS, EQUIPMENTS AND MATERIALS:

1. Breadboard
2. Power supply
3. IC 7408, 7432, 7404, 7411(3 input AND gate), 74151
4. LED
5. Jumper wires

DRAWING, DATA, TABLE

Refer to pages with the procedure instruction

GENERAL INSTRUCTION:

A multiplexer is a device capable of funneling data lines into a single line transmission to
another point. The multiplexer has two or more digital inputs signals connected to its
input. Control signals are also input to hell which data-inputs line to select for
transmission.

D0
D1
D2
D3
Experiment 1 : 2 Line Multiplexer

Procedure:

1. IC 7404, 7432, 7408 must be installed in the logic lab breadboard


2. the circuit was constructed as figure 1
3. Data must be set as switch like in multiplexer truth table. Output at LED must
recorded in table 1

INPUTS
OUTPUTS
A B C
0 X 0 0 1(B)
1 X 0 0 1(B)
X 0 1 0 1(A)
X 1 1 0 1(A)

TABLE 1.
Experiment 2 : 4 Line Multipplexer.

Procedure:

1. Ic 7411,7408,7404 was installed in the logic breadboard.


2. The circuit was construct in figure above .
3. Data must be set up as switch like input truth table ouput also must be
record in table 2

INPUTS OUTPUTS
Input
D0 D1 D2 D3 S0 S1 O/P
statement
0 0 0 0 0 0 0 D0
1 0 0 0 1 0 0 D1
0 1 0 0 0 1 0 D2
1 1 0 0 1 1 0 D2
0 0 1 0 0 1 1 D2
1 0 1 0 0 1 1 D2
0 1 1 0 0 1 1 D2
1 1 1 0 0 1 1 D2
0 0 0 1 1 0 0 D1
1 0 0 1 1 0 0 D1
1 0 1 0 1 0 0 D1
1 0 1 1 1 0 0 D1
1 1 0 0 0 1 0 D2
1 1 0 1 0 1 0 D2
1 1 1 0 0 1 1 D2
1 1 1 1 0 1 1 D2
Experiment 3 : 8 Line multiplexer

Procedure :

1. Ic 7415 multiplexer was installed in the logic lab breadboard.


2. 8 line multiplexer was constructed as shown in figure 3
3. Data must be set up as shown in table 3.Output LED also indications in table 3

U1 LED1
D0
4 D0
D1
3 6 LED2
D2 D1 ~W
2
D3 D2
1 D3 5
D4 Y
15
D5 D4
14
D6 D5
13 D6
D7
12
D7
S0
11 A
S1
10
S2 B
9
E C
7 ~G

74151N

INPUT OUTPUT INPUTS


E S2 S1 S0 D0 D1 D2 D3 D4 D5 D6 D70 L1 STATEMENT
0 0 0 0 1 0 0 0 0 0 0 0 1 D0
0 0 0 1 0 1 0 0 0 0 0 0 1 D1
0 0 0 1 0 0 1 1 0 0 0 1 0 D1
0 0 1 0 0 0 1 0 0 0 0 0 1 D2
0 0 1 1 0 0 0 1 0 0 0 0 1 D3
0 0 1 1 1 1 1 0 1 1 1 1 0 D3
0 1 0 0 0 0 0 0 1 0 0 0 1 D4
0 1 0 1 0 0 0 0 0 1 0 0 1 D5
0 1 0 1 1 1 1 1 1 0 1 1 0 D5
0 1 1 0 0 0 0 0 0 0 1 0 1 D6
0 1 1 1 0 0 0 0 0 0 0 1 1 D7

TABLE 2.
CONCLUSION:

In this experiment we learn to design the function of Multiplexer and construct the
internal circuitry of Multiplexer. Multiplexer is also known as the data selector.

QUESTION :

1. Why is a multiplexer sometimes called a data selector

Because it can control or choose inputs data to sent for control line or the input
line choose to used it.

2. The circuit of a DEMUX is basically the same as for a decoder

(TRUE/ FALSE)

You might also like