Scribd
Upload
114 views11 pages

Default Routing: Syntax: Router (Config) #Ip Route 0.0.0.0 0.0.0.0 (Or )

The document discusses several networking configuration examples including default routing, VLAN configuration on two switches, trunking configuration between two switches, VTP configuration with one switch as the server and the other as the client, and port security configuration on a switch interface. It also provides examples of NAT/PAT configuration on a router including static NAT configuration and verification commands.

Uploaded by

hamada alhag
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
114 views11 pages

Default Routing: Syntax: Router (Config) #Ip Route 0.0.0.0 0.0.0.0 (Or )

The document discusses several networking configuration examples including default routing, VLAN configuration on two switches, trunking configuration between two switches, VTP configuration with one switch as the server and the other as the client, and port security configuration on a switch interface. It also provides examples of NAT/PAT configuration on a router including static NAT configuration and verification commands.

Uploaded by

hamada alhag
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

Default Routing

Syntax: Router(config)#ip route 0.0.0.0 0.0.0.0 {<Next hop address>or <Exit Interface type><No.>}

Default routing - Example

ON KHAR: KHAR#configure terminal KHAR(config)#ip routing KHAR(config)#ip route 0.0.0.0 0.0.0.0 serial 0

Show commands: Router#show ip route

Morwan abdelrazig abubakar suwar aldahp Master of sciences in telecom technology CCNA &CCNP

VLAN Example

ON 192.168.20.50 VLAN CREATION: Switch-50(config)#vlan 10 Switch-50(config-vlan)#name sales Switch-50(config-vlan)#exit Switch-50(config)#vlan 20 Switch-50(config-vlan)#name mkt Switch-50(config-vlan)#exit Assigning membership to ports: Switch-51(config-if)#interface fa0/2 Switch-50(config-if)#switchport mode access Switch-50(config-if)#switchport access vlan 10 Switch-50(config-if)#exit Switch-50(config)#interface fa0/4 Switch-50(config-if)#switchport mode access Switch-50(config-if)#switchport access vlan 20 Vrification of vlan: Switch-50#show vlan

ON 192.168.20.50 VLAN CREATION: Switch-51(config)#vlan 10 Switch-51(config-vlan)#name sales Switch-51(config-vlan)#exit Switch-51(config)#vlan 20 Switch-51(config-vlan)#name mkt Switch-51(config-vlan)#exit Assigning membership to ports: Switch-51(config-if)#interface fa0/14 Switch-50(config-if)#switchport mode access Switch-51(config-if)#switchport access vlan 10 Switch-51(config-if)#exit Switch-51(config)#interface fa0/17 Switch-51(config-if)#switchport mode access Switch-51(config-if)#switchport access vlan 20 Vrification of vlan: Switch-51#show vlan

Morwan abdelrazig abubakar suwar aldahp Master of sciences in telecom technology CCNA &CCNP

Trunking Example

ON 192.168.20.50 To configure Trunking: Switch-50 #config terminal Switch-50(config)#interface fa0/24 Switch-50(config-if)#switchport mode trunk Switch-50(config-if)#switchport trunk allowed Vlan all Switch-50(config-if)#^Z Verify the output following command Switch-50#show interface trunk

ON 192.168.20.50 To configure Trunking: Switch-51 #config terminal Switch-51(config)#interface fa0/24 Switch-51(config-if)#switchport mode trunk Switch-51(config-if)#switchport trunk allowed Vlan all Switch-51(config-if)#^Z Verify the output following command Switch-51#show interface trunk

Morwan abdelrazig abubakar suwar aldahp Master of sciences in telecom technology CCNA &CCNP

VTP Example

ON192.168.20.50 VTP CONFIGURATION: Switch-50#config terminal Switch-5-(config)#vtp domain ccna Switch-5-(config)#vtp mode server Switch-5-(config)#vtp pruning Switch-5-(config)#vtp passwoard morwan

NOTE: VERIFY VLAN BEFORE AND AFTER CONFIGURATION ON 192.168.20.51 VTP CONFIGURATION:

Switch-51#config terminal
Switch-51(config)#vtp domain ccna Switch-51(config)#vtp mode client Switch-51(config)#vtp pruning Switch-51(config)#vtp passwoard morwan

VLAN CREATION: Switch-50#config terminal


Switch-50(config)#vlan 101 Switch-50(config-vlan)#name accounts Switch-50(config-vlan)#exit Switch-50(config)#vlan 102 Switch-50(config-vlan)#name programmer Switch-50(config-vlan)#^z Verify and troubleshooting: Switch-50#show vlan Switch-50#show vtp status

Verify and troubleshooting: Switch-50#show vlan Switch-50#show vtp status

Morwan abdelrazig abubakar suwar aldahp Master of sciences in telecom technology CCNA &CCNP

Switch(confug)#interface fa0/1 Switch(confug-if)#switch port-security maximum 1 Switch(confug-if)#switch port-security mac-address 0013.20B7.1234 Switch(confug-if)#switch port-security violation shutdown Switch(confug-if)#switch port-security Switch(confug-if)#^z Switch#show switch port-security Switch#show interface status
Morwan abdelrazig abubakar suwar aldahp Master of sciences in telecom technology CCNA &CCNP

ON 192.168.20.50 VLAN CREATION Switch-50(config)#vlan 10 Switch-50(config-vlan)#name sales Switch-50(config-vlan)#exit Switch-50(config)#vlan 20 Switch-50(config-vlan)#name mkt Switch-50(config-vlan)#exit Assigning membership to ports: Switch-50(config)#interface fa0/2 Switch-50(config-if)#switchport mode access Switch-50(config-if)#switchport access vlan 10

ON 192.168.20.51 VLAN CREATION Switch-51(config)#vlan 10 Switch-51(config-vlan)#name sales Switch-51(config-vlan)#exit Switch-51(config)#vlan 20 Switch-51(config-vlan)#name mkt Switch-51(config-vlan)#exit Assigning membership to ports: Switch-51(config)#interface fa0/14 Switch-51(config-if)#switchport mode access Switch-51(config-if)#switchport access vlan 10

Switch-50(config-if)#exit Switch-50(config)#interface fa0/4 Switch-50(config-if)#switchport mode access Switch-50(config-if)#switchport acces vlan20

Switch-51(config-if)#exit Switch-51(config)#interface fa0/17 Switch-51(config-if)#switchport mode access Switch-51(config-if)#switchport access vlan 20

Verification of vlan: Switch-50#show vlan

Verification of vlan: Switch-51#show vlan

Morwan abdelrazig abubakar suwar aldahp Master of sciences in telecom technology CCNA &CCNP

ON 192.168.20.50 VLAN CREATION Switch-50(config)#vlan 10 Switch-50(config-vlan)#name sales Switch-50(config-vlan)#exit Switch-50(config)#vlan 20 Switch-50(config-vlan)#name mkt Switch-50(config-vlan)#exit Assigning membership to ports: Switch-50(config)#interface fa0/1-2 Switch-50(config-if)#switchport mode access Switch-50(config-if)#switchport access vlan 10

CONFIGURATION ON ROUTER ROUTER#config terminal Router(config)interface Ethernet 0 Router(config-if)#no ip address Router(config-if)#no shutdown Router(config-if)#exit Router(config)#interface Ethernet 0.1 Router(config-if)#encapsulation dot 1q 10 Router(config-if)#ip address 192.168.1.1

255.255.255.0
Router(config-if)#exit Router(config)#interface Ethernet 0.2 Router(config-if)#encapsulation dot 1q 20 Router(config-if)#ip address 192.168.2.1

Switch-50(config-if)#exit Switch-50(config)#interface fa0/5-6 Switch-50(config-if)#switchport mode access Switch-50(config-if)#switchport acces vlan20 Switch-50(config)#interface fa0/10 Switch-50(config-if)#switchport mode trunk Switch-50(config)#switchport trunk allowed Vlan all Switch-50(config)#^z Switch-50#show vlan Switch#show interface trunk Morwan abdelrazig abubakar suwar aldahp Master of sciences in telecom technology CCNA &CCNP Verification of vlan:

255.255.255.0
Router(config-if)#exit Router(config)#no ip routing Router(config)#ip routing Router(config)#end

Router#show ip route Router#show running configuration

Configuration of PAT
Khartom#configur terminal Khartom(config)#interface S0 Khartom(config-if)#ip address 202.1.0.18 255.255.255.248 Khartom(config-if)#no shutdown Khartom(config-if)#encapsulation PPP Khartom(config-if)#ip nat outside Khartom(config-if)#exit Khartom(config)#interface e0 Khartom(config-if)#ip nat inside Khartom(config-if)#exit Khartom(config)#access-list 10 permit 192.168.1.0 0.0.0.255 Khartom(config)#ip nat inside source list 10 interface serial 0 overload Khartom(config)#end

Morwan abdelrazig abubakar suwar aldahp Master of sciences in telecom technology CCNA &CCNP

Configuring Natting

Router(config)#access-list 2 permit 10.0.0.0 0.0.0.255 Router(config)#ip nat pool p1 200.0.0.10 200.0.0.100 netmask 255.255.255.0 Router(config)#ip nat inside source list 2 pool p1 Router(config)#interface S0 Router(config-if)#ip address 200.1.1.1 255.255.255.0 Router(config-if)#no shutdown Router(config-if)#ip nat outside Router(config-if)#exit Router(config)#interface e0 Router(config-if)#ip address 10.1.1.1 255.0.0.0 Router(config-if)#no shutdown Router(config-if)#ip nat inside Router(config-if)#^z

Morwan abdelrazig abubakar suwar aldahp Master of sciences in telecom technology CCNA &CCNP

Configuration of static nat:


Khartom#configure terminal Khartom(config)#interface S0 Khartom(config-if)#ip address 202.1.0.18 255.255.255.248 Khartom(config-if)#no shutdown Khartom(config-if)#encapsulation PPP Khartom(config-if)#ip nat outside Khartom(config-if)#exit Khartom(config)#interface e0 Khartom(config-if)#ip nat inside Khartom(config-if)#exit Khartom(config)#ip nat insude source static 192.168.1.10 202.1.0.19 SHOW COMMANDS Khartom#show ip nat translatio Khartom#debug ip nat
Morwan abdelrazig abubakar suwar aldahp Master of sciences in telecom technology CCNA &CCNP

Morwan abdelrazig abubakar suwar aldahp Master of sciences in telecom technology CCNA &CCNP

You might also like