Scribd
Upload
365 views

Capture Board Connection (Eng)

This document provides connection information for several DigiNet capture board models: 1) The KMC-4400R is a 16-channel video capture board with RCA output and BNC inputs. It connects cameras from channel 1 to 16 with video to the front and ground to the rear. 2) The KMC-9016(R5) is compatible with the KMC-4400R and can output 480 frames per second. It connects cameras from channel 1 to 16 similarly. 3) The KMC-8016D is an upgraded version of the KMC-7016D. It connects cameras from channel 1 to 16 similarly and has audio and monitor connections.

Uploaded by

dejanpecic
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
365 views

Capture Board Connection (Eng)

This document provides connection information for several DigiNet capture board models: 1) The KMC-4400R is a 16-channel video capture board with RCA output and BNC inputs. It connects cameras from channel 1 to 16 with video to the front and ground to the rear. 2) The KMC-9016(R5) is compatible with the KMC-4400R and can output 480 frames per second. It connects cameras from channel 1 to 16 similarly. 3) The KMC-8016D is an upgraded version of the KMC-7016D. It connects cameras from channel 1 to 16 similarly and has audio and monitor connections.

Uploaded by

dejanpecic
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 25

DigiNet CAPTURE BOARD CONNECTION

INDEX

1. 2. 3. 4. 5.

KMC-4400R3 KMC-9016 (R5).12 KMC-8016D .15 KIO-8816A .19 I-AMP ... 23

1. KMC-4400R
1) SPECIFICATION

2) FEATURE
EXT. MONITOR OUTPUT (RCA) 1CH AUTOSELECT

1~16CH VIDEO INPUT PORT

VIDEO BRIGHT CONTROL

1~4CH VIDEO INPUT PORT (BNC)

Run , Power LED JUMPER

Reset JUMPER

3) CONNECTION(4CH OVER)
1ST CAM ----------- 16TH CAM FRONT Video, REAR GND

THIS MARK IS VIDEO

3) CONNECTION(4CH OVER)

4TH CAM VIDEO(4,8,12,16) 3RD CAM VIDEO(3,7,11,15) 2ND CAM VIDEO(2,6,10,14) 1ST CAM VIDEO(1,5,9,13)

UPPER, LOWER SAME

FRONT Video, REAR GND 9 12 CAM 1ST CAM ----------- 16TH CAM

GND

1 4 CAM 5 8 CAM

THIS MARK IS VIDEO

13 16 CAM

4) CONNECTION(8CH OVER)

Primary Card

Secondary Card

4) CONNECTION(8CH OVER)
Primary Card Secondary Card

8CH

1ST CAM

4ST CAM

5ST CAM

8ST CAM

Secondary

Primary

CPU

Primary card should be installed on the slot near CPU however, it is subject to charge in some mainboards

4) CONNECTION(8CH OVER)
Primary Card Secondary Card

1ST CAM

4ST CAM

5ST CAM

8ST CAM

16CH
Primary Card Secondary Card

9ST CAM

12ST CAM

13ST CAM

16ST CAM

CONNECT TO THE MAIN BOARDS HDD JUMPER

POWER LED RIGHT +

RUN LED LEFT +

RUN LED RIGHT +

RESET + - (NO SEQ) POWER LED LEFT + CONNECT TO THE MAIN BOARDS RESET JUMPER

2. KMC-9016(R5)
1) SPECIFICATION
SAME AS OLDER KMC-9016 OUTPUT 480 FRAME/SEC USE WITH KMC-4400R BOARD EXTERNAL MONITOR PORT COMPATIBLE DIGINET-3000 SYSTEM

2) FEATURE
EXT. MONITOR OUTPUT (RCA) DIVIDE SCREEN A.FULL SCREEN BRIGHT ADJUST B.DIVIDE SCREEN BRIGHT ADJUST NOTICE. A : FIRST B : SECOND

1~16CH VIDEO INPUT PORT

NTSC/PAL

NTSC : OPEN PAL : CLOSE

3) CONNECTION

THIS MARK IS VIDEO FRONT Video, REAR GND

1ST CAM

16TH CAM

3. KMC-8016D
1) SPECIFICATION

UPGRADE KMC-7016D REPAIRED SCREEN VIBRATION 1CH TOTAL 30 FRAME/SEC 4 ~ 16CH TOTAL 25 FRAME/SEC NTSC/PAL VIDEO FORMAT

2) FEATURE
EXT. MONITOR OUTPUT (RCA) 1CH AUTOSELECT

1~16CH VIDEO INPUT

Run , Power LED JUMPER

AUDIO JUMPER (USE LATER)

Reset JUMPER 1~4CH VIDEO INPUT(BNC)

SCREEN BRIGHT ADJUST

3) CONNECTION
FRONT Video, REAR GND

1ST CAM ----------- 16TH CAM

THIS MARK IS VIDEO

POWER LED LEFT +

AUDIO (USE LATER)

RUN LED LEFT +

RESET JUMPER

4. KIO-8816A
1) SPECIFICATION
IO8816(ISA)S UPGRADE PCI SLOT TYPE REMOTE CONTROL NOTICE) WHEN USE THIS CARD, MUST BE SET CMOS BIOS SETUPS INTEGRATED PERIPHEARLS -> ONBOARD SERIAL PORT 1 : 3F8/IRQ4

KIO-8816A (PCI)

IO-8816 (ISA)

2) FEATURE
LED EXT. MONITOR OUTPUT (RCA)

EXTERNAL MONITOR

Run , Power LED SENSOR INPUT, CONTROL OUTPUT Reset JUMPER

1CH AUTOSELEC T REMOTE RX IR P/T CONTROL RS422

COM PORT CONNECT PORT

3) CONNECTION

POWER LED LEFT + RUN LED LEFT +

FRONT Video, REAR GND

1st CAM -- 16th CAM

THIS MARK IS Video

RESET JUMPER

FRONT LEFT 1-8 SENSOR INPUT 9,10 GND REAR LEFT 1-8 CONTROL OUTPUT 9,10 GND

CONNECT

CONNECT UPPER RS422 + LOWER RS422 -

CONNECT TO COM1 PORT AT DVRS REAR

5. I-AMP
1) FEATURE
This card use only DigiNet-3408, 3416 system

CONNECT TO PC POWER

FRONT

BACK

2) CONNECTION

You might also like