Scribd
Upload
184 views

ACI 710 C.link Access Modem RevC 080110

The ACI 710 c.LINK Access Modem is a layer 2 Ethernet to coaxial bridge that provides a high-speed connection between Ethernet networks and c.LINK enabled coaxial access networks. It operates as a client device that bridges traffic between its Ethernet port and a c.LINK enabled Network Controller headend node, with each headend supporting up to 31 client devices. The modem features automatic frequency scanning, bandwidth management, rate control, and operates as a client on the point-to-multipoint c.LINK access network topology.

Uploaded by

rbroussard2182
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
184 views

ACI 710 C.link Access Modem RevC 080110

The ACI 710 c.LINK Access Modem is a layer 2 Ethernet to coaxial bridge that provides a high-speed connection between Ethernet networks and c.LINK enabled coaxial access networks. It operates as a client device that bridges traffic between its Ethernet port and a c.LINK enabled Network Controller headend node, with each headend supporting up to 31 client devices. The modem features automatic frequency scanning, bandwidth management, rate control, and operates as a client on the point-to-multipoint c.LINK access network topology.

Uploaded by

rbroussard2182
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ACI 710 c.

LINK Access Modem

Preliminary

ACI 710, c.LINK Access Modem is the layer 2 Ethernet to coax bridge for access networks. It provides a high-speed bridge between standard 10/100BaseT Ethernet network and c.LINK enabled coaxial access network. As a client device in the coaxial access network, the MAM102 layer 2 ECB bridges the traffic between its Ethernet port and c.LINK enabled Network Controller (NC) device. The c.LINK Access Network is a point to multi-point topology, all client devices (layer 2 ECB) communicate to the Headend node (NC), where each of the Headend node can manage up to 31 client devices.

Feature
Fully integrated c.LINK controller for coax-based access networks Automatic frequency scanning from 800MHz to 1500MHz Bandwidth management System upstream and downstream rate control Client node data rate limits and guarantees > 250Mbps coaxial interface Single 10/100BaseTX Ethernet interface on RJ-45 connector Operates as a c.LINK access network client device Central network management through network controller (NC) API and proprietary L2 messaging Coexistence with all broadband services and c.LINK networks Easily installed into the existing coax plant wiring Status LEDs (Power, Ethernet, c.LINK)

Page 1 of 2

www.acicomms.com

Preliminary

ACI Communications, Inc. reserves the right to discontinue the Rev.C 01-10-08 ACI Communications, Inc manufacture or change specifications without prior notice on any parts Printed in USA illustrated in this data sheet. Current drawings are available upon request. Page 2 of 2 www.acicomms.com

You might also like