Scribd
Upload
3K views5 pages

Minimum Number of Thermocouples-Local PWHT

The document provides recommendations for the minimum number of thermocouples needed for post-weld heat treatment of butt welds on horizontal pipes of various sizes. It specifies the number of thermocouples and control zones required for pipe sizes up to 6 inches, between 8 to 12 inches, and between 20 to 30 inches. It also addresses thermocouple requirements for branches, nozzles, or attachments.

Uploaded by

Pradip Goswami
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
3K views5 pages

Minimum Number of Thermocouples-Local PWHT

The document provides recommendations for the minimum number of thermocouples needed for post-weld heat treatment of butt welds on horizontal pipes of various sizes. It specifies the number of thermocouples and control zones required for pipe sizes up to 6 inches, between 8 to 12 inches, and between 20 to 30 inches. It also addresses thermocouple requirements for branches, nozzles, or attachments.

Uploaded by

Pradip Goswami
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

Minimum Number of Thermocouples (Monitoring and Control) Recommended for Local 360-Degree Band PWHT of a Butt Weld for

Piping in the Horizontal Position with Pipe Size up to 6 NPS (150 DN) and One Control Zone.

Minimum Number of Thermocouples (Monitoring and Control) Recommended for Local 360.Degree Band PWHT of a Butt Weld for Piping in the Horizontal Position with Pipe Sizes of 8 and up to 12 NPS (200 to 300 DN) and two Control Zones.

Minimum Number of Thermocouples (Monitoring and Control) Recommended for Local 360-Degree Band PWHT of a Butt Weld for Piping in the Horizontal Position with Pipe Sizes of 20 and up to 30 NPS (500 to 750 DN) and Four Control Zones

Minimum Number of Monitoring Thermocouples Recommended for a Branch, Nozzle, or Attachment

You might also like