Scribd
Upload
20K views

Textile Manufacturing Process

The text summarizes the cotton textile manufacturing process in 3 sentences: Cotton textile manufacturing involves 5 stages: cultivating cotton, preparatory processes to remove vegetable matter from cotton, spinning cotton into yarn, weaving yarn into fabric, and finishing processes to treat the fabric. Cotton is grown in hot climates and harvested before being cleaned, carded, and spun into yarn using machines like mules and rings. Weaving uses looms to interlace warp and weft yarns before fabrics undergo finishing to develop their full potential and value.

Uploaded by

kasthu152
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
20K views

Textile Manufacturing Process

The text summarizes the cotton textile manufacturing process in 3 sentences: Cotton textile manufacturing involves 5 stages: cultivating cotton, preparatory processes to remove vegetable matter from cotton, spinning cotton into yarn, weaving yarn into fabric, and finishing processes to treat the fabric. Cotton is grown in hot climates and harvested before being cleaned, carded, and spun into yarn using machines like mules and rings. Weaving uses looms to interlace warp and weft yarns before fabrics undergo finishing to develop their full potential and value.

Uploaded by

kasthu152
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PPT, PDF, TXT or read online on Scribd
You are on page 1/ 12

Textile manufacturing process

Textile manufacturing is a major industry. It is based in the conversion of three types of fibre into yarn, then fabric, then textiles. These are then fabricated into clothes or other artifacts. Cotton remains the most important natural fibre, so is treated in depth. There are many variable processes available at the spinning and fabric-forming stages coupled with the complexities of the finishing and colouration processes to the production of a wide ranges of products. There remains a large industry that uses hand techniques to achieve the same results.

Processing of cotton
Cotton is the world's most important natural fibre. In the year 2007, the global yield was 25 million tons from 35 million hectares cultivated in more than 50 countries There are five stages Cultivating and Harvesting Preparatory Processes Spinning Weaving Finishing

Cultivating and harvesting


Cotton is grown anywhere with long, hot dry summers with plenty of sunshine and low humidity. Planting is from September to mid November and the crop is harvested between March and May. The cotton bolls are harvested by stripper harvesters and spindle pickers, that remove the entire boll from the plant. The cotton boll is the seed pod of the cotton plant, attached to each of the thousands of seeds are fibres

Preparatory processes- preparation of yarn


Cotton mills get the cotton shipped to them in large, 500 pound bales. When the cotton comes out of a bale, it is all packed together and still contains vegetable matter. The bale is broken open using a machine with large spikes. It is called an Opener. In order to fluff up the cotton and remove the vegetable matter, the cotton is sent through a picker, or similar machines. A picker looks similar to the carding machine and the cotton gin, but is slightly different. The cotton is fed into the machine and gets beaten with a beater bar, to loosen it up. It is fed through various rollers, which serve to remove the vegetable matter

Spinning- yarn manufacture


The spinning machines take the roving, thins it and twists it, creating yarn which it winds onto a bobbin. In mule spinning the roving is pulled off a bobbin and fed through some rollers, which are feeding at several different speeds. This thins the roving at a consistent rate. If the roving was not a consistent size, then this step could cause a break in the yarn, or could jam the machine. The yarn is twisted through the spinning of the bobbin as the carriage moves out, and is rolled onto a cop as the carriage returns. Mule spinning produces a finer thread than the less skilled ring spinning

Mule spinning

Mule spinning
y

Ring pinning

ng sp nn ng

Weaving-fabric manufacture
The weaving process uses a loom. The lengthway threads are known as the warp, and the cross way threads are known as the weft. The warp which must be strong needs to be presented to loom on a warp beam. The weft passes across the loom in a shuttle, that carries the yarn on a pirn. These pirns are automatically changed by the loom. Thus, the yarn needs to be wrapped onto a beam, and onto pirns before weaving can commence

Knitting- fabric manufacture

A circ lar k itti

machi .

Clo -

o the eedle .

Knitting by machine is done in two different ways; warp and weft. Weft knitting is similar in method to hand knitting with stitches all connected to each other horizontally. Various weft machines can be configured to produce textiles from a single spool of yarn or multiple spools depending on the size of the machine cylinder (where the needles are bedded). In a warp knit there are many pieces of yarn and there are vertical chains, zigzagged together by crossing the yarn.

Finishing- processing of textiles


The grey cloth,woven cotton fabric in its loom-state, not only contains impurities, including warp size, but requires further treatment in order to develop its full textile potential. Furthermore, it may receive considerable added value by applying one or more finishing processes

You might also like