SAIGON EAST-WEST HIGHWAY CONSTRUCTION PROJECT

OBAYASHI - P.S MITSUBISHI JOINT VENTURE

CONSTRUCTION CONTRACT PACKAGE 1

QUAN HE GIA DUNG TRONG KHO VA O AM THE MOISTURE CONTENT - DRY DENSITY RELATIONSHIP (AASHTO T180A)
Loai vat lieu-Type of Material: Soil for embankment work Yeu cau so -Request No.: SH-TR-2-763 Nguon vat lieu-Source of Material:Cat Thnh Toan Ky hieu mau-Sampling No.: M01- Ramp H - 2nd layer gay lay mau-Date of Sampling : 18/04/2006 N V tr lay mau-Location of Sampling : Km 0+000 - Km0+600 th nghiem-Date of tesing : 19/04/2006 Ngay

Vat lieu dung cho-Intended use: Filling / san la

1. Bao cao -Report:

So chay / lp Number of blows/Layer: Chieu cao ri Drop height (mm) 25 457 So lp Number of Layer The tch khuon Volume of mould (cm3) 5 943

Trong lng bua Weight of Hammer (g) Trong lng

khuon Weight of mould (g) 5 5334 1854 1.966 20.79 1.628

So lieu cua ng cong dung trong kho - Data of dry density curve
Th nghiem so - Test N0 Trong lng khuon + at t Weight of mould + wet soil (g) Trong lng at t am nen Weight of compacted wet soil (g) Khoi lng the tch t - Wet density (g/cm3) o am - Moisture Content (%) 1 5122 1642 1.741 8.12 2 5217 1737 1.842 11.52 1.652 3 5317 1837 1.948 14.32 1.704 4 5349 1869 1.982 17.99 1.680

1.610 Khoi lng the tch kho- Dry density (g/cm3) So hop... - Tare N0 at t + hop - Wet soil + Tare (g) at kho + hop - Dry soil + Tare (g) Trong lng hop - Weight of Tare Trong lng nc- Weight of Water Trong lng at kho- Weight of dry soil (g) N5 159.48 148.96 19.39 10.52
Dung trong kho - Dry Density (g/cm3)

So lieu cua o am - Data of moisture content

N19 178.13 161.73 19.39 16.40 142.34 11.52 N18 176.35 156.70 19.50 19.65 137.20 14.32 N12 181.33 156.63 19.33 24.70 137.30 17.99 N21 228.15 192.36 20.17 35.79 172.19 20.79

129.57 8.12
1.80

m- moisture contents Ket qua - Result :

2 - o am toi u Optimum Moisture Content (%) 3 TN (OMC) = W- Dung trong kho ln 15.00% nhat Maximum dry density (g/cm3) max (MDD) = 1.704

1.70

1.60

1.50 4.0 6.0 8.0 10.0 12.0 14.0 16.0 18.0 20.0

o am - Moisture Content (%)

Nha thau - Contractor Th nghiem Tested by Ten-Name: Ky ten-Signature: Ngay-Date: Ky s vat lieu Material Engineer Quan l chat lng QA/QC Manager

T van- Consultan Giam sat Inspector

MDD_08/01/2011_20:15:22

ng bo ho

8 2.3

9 2.25

10 2.2

11 2.15

MDD_08/01/2011_20:15:23

ROJECT
160 4.00 8.0 12.0 16.0 20.0 1239 1079 919 759 599

AM NSHIP 864 832 32 551 800

4500 3480

-TR-2-763

use: Filling / san lap

ing : 18/04/2006

ng : 19/04/2006

Trong lng bua Weight of Hammer (g) Trong lng

khuon Weight of mould (g)

ensity curve

7.69 719 707

551

10.69 12 156

13.69

16.69 1.44

7.69

4000 1181 120 1061 120

941.00 120.00 821.00

120 ng giong
15.00 15.00 1.704 1.400 4.00 15.00 1.704 1.704

701.0

16.0

18.0

20.0

22.0

24.0

Content (%)

van- Consultant Ky s vat lieu Material Engineer

Ket qua MDD W% 1.704 15.00

MDD_08/01/2011_20:15:23

MDD_08/01/2011_20:15:23

SAIGON EAST-WEST HIGHWAY CONSTRUCTION PROJECT

OBAYASHI - P.S MITSUBISHI JOINT VENTURE
CONSTRUCTION CONTRACT PACKAGE 1

KIEM TRA O CHAT BANG PHNG PHAP DAO VONG DENSITY OF SOIL IN-PLACE BY THE DRIVE CYLINDER METHOD
(AASHTO T204)
Loai vat lieu-Type of Material: Filling sand/ cat lap Hng mc - Item : Lp - Layer No.: Ly trnh -Station :
Location of Sampling:

Yeu cau so -Request No.: Vat lieu dung cho-Intended use : Ngay lay mau-Date of Sampling: Ngay th nghiem-Date of tesing:

Soil Mass and Density Determination

(1) Weight of cylinder & sand (g) (2) Weight of cylinder (g) (3) Weight of sand in cylinder (g) [(3) = (1) - (2)] (4) (5) (6) Volume of cylinder Wet density of sand (g/cm3) [(5) = (3)/(4)] Dry density of sand (g/cm3) (6)= {(5)/[(1+(12)/100]}

Water Content Calculation Can No.:

(7) Can mass (8) Mass of can +wet soil (g) (9) Mass of can +dry soil (g) (10) Mass of water (g) [(10) = (8) - (9)] (11) Mass of dry soil (g) [(11) = (9) - (7)] (12) Water Content (%) [(12) = (10)/(11)]

Result
(13) Optimum Moisture Content (%) (14) Max. Dry Density (g/cm3) (12) Field Water Content (%) (6) Field Dry Density (g/cm3) (15) Compaction K (%) [(15) = (6)/(14).100] (16) Compaction requirement (%) (17) Remark (Passed/Failed) (18) Retest (Passed/Failed) Min 95 Min 95 Min 95

Nha thau - Contractor

Th nghiem Tested by Ten-Name: Ky s vat lieu Quan l chat lng Material Engineer QA/QC Manager

T vanGiam sat

Inspector

Ky ten-Signature: Ngay-Date:

ROJECT

VONG METHOD

ended use : Sampling:

of tesing:

Min 95

Min 95

T van- Consultant Giam sat Ky s vat lieu Material Engineer

Inspector

SAIGON EAST-WEST HIGHWAY CONSTRUCTION PROJECT

OBAYASHI - P.S MITSUBISHI JOINT VENTURE
CONSTRUCTION CONTRACT PACKAGE 1

KIEM TRA O CHAT BANG PHNG PHAP ROT CAT DENSITY OF SOIL IN-PLACE BY THE SAND-CONE METHOD
(AASHTO T191)
Loai vat lieu-Type of Material : Hng mc - Item : Lp - Layer No.: Ly trnh -Station :
Location of Sampling:

Yeu cau so -Request No.: Vat lieu dung cho-Intended use : Ngay lay mau-Date of Sampling: Ngay th nghiem-Date of tesing:

Soil Mass and Volume Determination

(1) (2) (3) (4) (5) (6) (7) (8) (9) Initial mass of sand +apparatus (g) Final mass of sand +apparatus (g) Wt of sand in cone (g) Wt of sand in hole (g) [(4) = (1) - (2) - (3)] Unit weight of sand (g/cm3) Volume of hole (cm ) [(6) = (4) / (5)]
3

1479 1.380

1479 1.380

1479 1.380

Wt. of wet sand + Container (g) Wt. Container Mass of excavated of sand (g) [(9) = (7) - (8)]

(10) Wet density of sand (g/cm3) [(10) = (9) / (6)] (11) Dry density of sand (g/cm3) (11) = (10) / (1+((17)/100)

Water Content Calculation Can No.:

(12) Can mass (13) Mass of can +wet soil (g) (14) Mass of can +dry soil (g) (15) Mass of water (g) [(15) = (13) - (14)] (16) Mass of dry soil (g) [(16) = (14) - (12)] (17) Water Content (%) [(17) = (15)/(16)]

Result
(18) Optimum Moisture Content (%) (19) Max. Dry Density (g/cm )
3

18.00 1.545

18.00 1.545

18.00 1.545

(17) Field Water Content (%) (11) Field Dry Density (g/cm3) (20) Compaction K (%) [(20) = (11)/(19)] (21) Compaction requirement (21) Remark (Passed/Failed) (22) Retest (Passed/Failed) Min 95 Min 95 Min 95

Nha thau - Contractor

Th nghiem Tested by Ten-Name: Ky s vat lieu Quan l chat lng Material Engineer QA/QC Manager

T va Giam sat

Inspector

Ky ten-Signature:

Ngay-Date:

OJECT

CAT HOD

nded use :

Sampling:

f tesing:

1479 1.380

1479 1.380

18.00 1.545

18.00 1.545

Min 95

Min 95

T van- Consultant Giam sat Ky s vat lieu Material Engineer

Inspector

SAIGON EAST-WEST HIGHWAY CONSTRUCTION PROJECT

OBAYASHI - P.S MITSUBISHI JOINT VENTURE
CONSTRUCTION CONTRACT PACKAGE 1

KIEM TRA O CHAT BANG PHNG PHAP DAO VONG DENSITY OF SOIL IN-PLACE BY THE DRIVE CYLINDER METHOD
(AASHTO T204)
Loai vat lieu-Type of Material: Filling sand/ cat lap Hng mc - Item: Filling sand for Lp - Layer No.: Ly trnh -Station :
Location of Sampling:

Yeu cau so -Request No.:

Vat lieu dung cho-Intended use: Filling Ngay lay mau-Date of Sampling: Ngay th nghiem-Date of tesing: Soil Mass and Density Determination

(1) Weight of cylinder & sand (g) (2) Weight of cylinder (g) (3) Weight of sand in cylinder (g) [(3) = (1) - (2)] (4) (5) (6) Volume of cylinder Wet density of sand (g/cm ) [(5) = (3)/(4)]
3

1898 712.5 1185.5 582 2.037 1.666 Water Content Calculation

Dry density of sand (g/cm3) [(6)= {(5)/[(1+(12)/100]}

Can No.:
(7) Can mass (8) Mass of can +wet soil (g) (9) Mass of can +dry soil (g) (10) Mass of water (g) [(10) = (8) - (9)] (11) Mass of dry soil (g) [(11) = (9) - (7)] (12) Water Content (%) [(12) = (10)/(11).100]

88.56 215 192 23 103.44 22.24 Result

(11) Optimum Moisture Content (%) (12) Max. Dry Density (g/cm )
3

18.00 1.55
22.24 1.666 107.9 95.0

21.25 1.52

21.25 1.52

(13) Field Water Content (%) (6) Field Dry Density (g/cm )
3

(14) Compaction K (%) [(14) = (6)/(12)] (15) Compaction requirement : (16) Remark (Passed/Failed) (17) Note(Test/Retest) :

Nha thau - Contractor

Th nghiem Tested by Ten-Name: Ky s vat lieu Quan l chat lng Material Engineer QA/QC Manager

T van- C Giam sat

Inspector

Ky ten-Signature: Ngay-Date: Series No. PK1-SL-SAND CONE-

PROJECT

RE

AO VONG R METHOD

Intended use: Filling/san lap

e of Sampling:

te of tesing:

21.25 1.52

21.25 1.52

T van- Consultant Giam sat Ky s vat lieu Material Engineer

Inspector

SAIGON EAST-WEST HIGHWAY CONSTRUCTION PROJECT

OBAYASHI - P.S MITSUBISHI JOINT VENTURE
CONSTRUCTION CONTRACT PACKAGE 1

KIEM TRA O CHAT BANG PHNG PHAP ROT CAT DENSITY OF SOIL IN-PLACE BY THE SAND-CONE METHOD
(AASHTO T191)
Loai vat lieu-Type of Material: Filling sand/ cat lap Hng mc - Item: Filling sand for Lp - Layer No.: Ly trnh -Station :
Location of Sampling:

Yeu cau so -Request No.:

Vat lieu dung cho-Intended use: Filling Ngay lay mau-Date of Sampling: Ngay th nghiem-Date of tesing: Soil Mass and Volume Determination

(1) (2) (3) (4) (5) (6) (7) (8) (9)

Initial mass of sand +apparatus (g) Final mass of sand +apparatus (g) Wt of sand in cone (g) Wt of sand in hole (g) [(4) = (1) - (2) - (3)] Unit weight of sand (g/cm3) Volume of hole (cm3) [(6) = (4) / (5)] Wt. of wet Soil + Container (g) Wt. Container Mass of excavated of soil (g) [(9) = (7) - (8)]

(10) Total unit weight (ton/m3) [(10) = (9) / (6)] (11) Dry unit weight (ton/m3) [(11) = (10) / (1+((15)/100) ]

7934 4196 1479 2259 1.380 1637 3133 317 2816 1.720 1.500 Water Content Calculation 19.1 136 121

1479 1.38

1479 1.38

Can No.:
(12) Can mass (13) Mass of can +wet soil (g) (14) Mass of can +dry soil (g) (15) Mass of water (g) [(15) = (13) - (14)] (16) Mass of dry soil (g) [(16) = (14) - (12)] (17) Water Content (%) [(17) = (15)/(16)] (18) Optimum Moisture Content (%) (19) Max. Dry Density (ton/m )
3

14.72 Result

21.25 1.52
14.72 1.500 98.7 95.0

21.25 1.52

21.25 1.52

(20) Field Water Content (%) (11) Field Dry Density (ton/m3) (21) Compaction K (%) [(21) = (11)/(19)] (20) Compaction requirement: (21) Remark (Passed/Failed) (22) Note (Test/Retest) :

Nha thau - Contractor

Th nghiem Tested by Ten-Name: Ky s vat lieu Quan l chat lng Material Engineer QA/QC Manager

T van- C Giam sat

Inspector

Ky ten-Signature: Ngay-Date:

Series No.

PK1-SL-SAND CONE-

PROJECT

RE

OT CAT METHOD

Intended use: Filling/san lap

e of Sampling:

te of tesing:

1479 1.38

1479 1.38

21.25 1.52

21.25 1.52

T van- Consultant Giam sat Ky s vat lieu Material Engineer

Inspector

SAIGON EAST-WEST HIGHWAY CONSTRUCTION PROJECT OBAYASHI - P.S MITSUBISHI JOINT VENTURE CONSTRUCTION CONTRACT PACKAGE 1 QUAN HE GIA DUNG TRONG KHO VA O AM THE MOISTURE CONTENT - DRY DENSITY RELATIONSHIP (AASHTO T180A)
Loai vat lieu-Type of Material: Nguon vat lieu-Source of Material: Ky hieu mau-Sampling No.: V tr lay mau-Location of Sampling: Yeu cau so -Request No.: SH-IR-1Vat lieu dung cho-Intended use: Ngay lay mau-Date of Sampling: Ngay th nghiem-Date of tesing:

1. Bao cao - Report:

So chay / lp Number of blows/Layer: Chieu cao ri Drop height (mm) 25 457 So lp Number of Layer The tch khuon Volume of mould (cm3) 5 Trong lng bua Weight of Hammer (g) Trong lng khuon Weight of mould (g)

So lieu cua ng cong dung trong kho - Data of dry density curve Th nghiem so - Test N0 1 2 3 4 5 Trong lng khuon + at t Weight of mould + wet soil (g) Trong lng at t am nen Weight of compacted wet soil (g) Khoi lng the tch t - Wet density (g/cm3) So hop... - Tare N0 at t + hop - Wet soil + Tare (g) at kho + hop - Dry soil + Tare (g) Trong lng hop - Weight of Tare Trong lng nc- Weight of Water Trong lng at kho- Weight of dry soil (g) o am- Moisture Content (%) Khoi lng the tch kho- Dry density (g/cm3)
Dung trong kho - Dry Density (g/cm3)

Ket qua - Result 2 - o am toi u Optimum Moisture Content (%) WTN (OMC) = 3 - Dung trong kho ln nhat Maximum dry density (g/cm3) max (MDD) =

1.70 1.66 1.62 1.58 1.54 1.50 10 11 12 13 14 15 16 17 18

o am - Moisture Content (%)

Nha thau - Contractor Th nghiem Tested by Ten-Name: Ky ten-Signature: Ngay-Date: Ky s vat lieu Material Engineer Quan l chat lng QA/QC Manager

T van- Consulta Giam sat Inspector

Series No.:

PK1-SL-MDD-T180-

OJECT E

AM NSHIP

est No.: SH-IR-1-

o-Intended use:

te of Sampling:

Date of tesing:

4500

ensity curve 6 7

15

16

17

18

19

20

ure Content (%)

T van- Consultant Ky s vat lieu Material Engineer

SAIGON EAST-WEST HIGHWAY CONSTRUCTION PROJECT OBAYASHI - P.S MITSUBISHI JOINT VENTURE CONSTRUCTION CONTRACT PACKAGE 1 QUAN HE GIA DUNG TRONG KHO VA O AM THE MOISTURE CONTENT - DRY DENSITY RELATIONSHIP (AASHTO T99A)
Loai vat lieu-Type of Material: Nguon vat lieu-Source of Material: Ky hieu mau-Sampling No.: V tr lay mau-Location of Sampling: Yeu cau so -Request No.: SH-IR-1Vat lieu dung cho-Intended use: Ngay lay mau-Date of Sampling: Ngay th nghiem-Date of tesing:

1. Bao cao - Report:

So chay / lp Number of blows/Layer: Chieu cao ri Drop height (mm) 25 305 So lp Number of Layer The tch khuon Volume of mould (cm3) 3 Trong lng bua Weight of Hammer (g) Trong lng khuon Weight of mould (g)

So lieu cua ng cong dung trong kho - Data of dry density curve Th nghiem so - Test N0 1 2 3 4 5 Trong lng khuon + at t Weight of mould + wet soil (g) Trong lng at t am nen Weight of compacted wet soil (g) Khoi lng the tch t - Wet density (g/cm3) So hop... - Tare N0 at t + hop - Wet soil + Tare (g) at kho + hop - Dry soil + Tare (g) Trong lng hop - Weight of Tare Trong lng nc- Weight of Water Trong lng at kho- Weight of dry soil (g) o am- Moisture Content (%) Khoi lng the tch kho- Dry density (g/cm3)
Dung trong kho - Dry Density (g/cm3)

Ket qua - Result 2 - o am toi u Optimum Moisture Content (%) WTN (OMC) = 3 - Dung trong kho ln nhat Maximum dry density (g/cm3) max (MDD) =

1.70 1.66 1.62 1.58 1.54 1.50 10 11 12 13 14 15 16 17

o am - Moisture Content (%)

18

Nha thau - Contractor Th nghiem Tested by Ten-Name: Ky ten-Signature: Ngay-Date: Ky s vat lieu Material Engineer Quan l chat lng QA/QC Manager

T van- Consul Giam sat Inspector

Series No.:

PK1-SL-MDD-T99-

ROJECT RE

AM ONSHIP

quest No.: SH-IR-1-

ho-Intended use:

Date of Sampling:

-Date of tesing:

2500

density curve 6 7

15

16

17

18

19

20

sture Content (%)

T van- Consultant Ky s vat lieu Material Engineer