Scribd
Upload
105 views2 pages

Cooling Coil

The cooling coil is a component used to cool oil lubricated vertical bearings. It consists of copper pipes fitted with a water inlet and outlet to cool down the winding and further cool the bearing. The cooling coil is used to transfer heat from the bearing using water circulating through copper pipes.

Uploaded by

Rakesh Nair A
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
105 views2 pages

Cooling Coil

The cooling coil is a component used to cool oil lubricated vertical bearings. It consists of copper pipes fitted with a water inlet and outlet to cool down the winding and further cool the bearing. The cooling coil is used to transfer heat from the bearing using water circulating through copper pipes.

Uploaded by

Rakesh Nair A
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Cooling Coil

Key Words: Coil; Refrigeration; Bearing, Sleeve; Generator; Hydrogenerator; Turbogenerator; Tachogenerator; Induction; Synchronous; Direct Current Classification: Component The cooling coil is used on oil lubricated vertical bearings. It is intended to cool down the winding for further bearing cooling down. Consisting of copper pipes, it is fitted with an inlet and an outlet of water.

Figure 1 Water inlet and outlet

You might also like