Setting GPRS: Disini
Setting GPRS: Disini
General Setting (Parameter yang digunakan untuk melakukan koneksi & MMS dengan
jaringan 3) , khusus untuk layanan internet bulanan klik disini
Setting GPRS
Setting MMS
Connection : 3mms
name
Data bearer : GPRS
Access point : 3mms
name
User name : 3mms
Prompt : No
Password
Password : 3mms
Authentication : Normal
Gateway IP : 0.0.0.0
address
Homepage : http://mms.three.co.id
Phone IP : Automatic
address
Primary name : 0.0.0.0
server
Secondary : 0.0.0.0
name server
Proxy server : 10.4.0.10
address
Proxy port : 3128
number
II. Layanan Internet Bulanan
1. Masuk ke Menu, click Services > Option > Settings > Default Access Point > Options
> New Access point > Use default settings
2. Ganti parameter GPRS yang dibutuhkan seperti yang dijabarkan dibawah ini
Connection name – 3gprs
Data bearer – GPRS
Access point name – 3gprs
User name – 3gprs
Prompt Password – No
Password – 3gprs
Authentication – Normal
Homepage – http://wap.three.co.id
Connection Security – off
Session mode – permanent
3. Press Option > Advanced Setting, Masukkan parameter yang dibutuhkan seperti yang
dijabarkan dibawah ini :
Phone IP address – Automatic
Primary name server – 0.0.0.0
Secondary name server – 0.0.0.0
Proxy server address – 10.4.0.10
Proxy port number – 3128
1. Go to Menu, click Messages > Option > Settings > Multimedia Messages > Access
Point in Use > Options > New Access point > Use default settings
2. Change each MMS parameter to this value:
Connection name – 3mms
Data bearer – GPRS
Access point name – 3mms
User name – 3mms
Prompt Password – No
Password – 3mms
Authentication – Normal
Gateway IP address – 0.0.0.0
Homepage – http://mms.three.co.id
3. Press Option > Advanced Setting, fill in the parameters with these values:
Phone IP address – Automatic
Primary name server – 0.0.0.0
Secondary name server – 0.0.0.0
Proxy server address – 10.4.0.10
Proxy port number – 3128
4. Press Messaging > Options > Setting > Multimedia Message, fill in the default setting
with the values below.
Access Point in use: 3mms
Multimedia reception: always on
On receiving message: Retrieve immediately
Allow anonymous messages: yes
Receive adverts: yes
Receive report: yes
Deny report sending: no
Message validity: maximum time
Image size: small
Default speaker: loudspeaker
IV. Sony Ericsson
1. Go to main menu, click Browser > Profile Setting > Operator (if available)
Type in Profile Name : 3GPRS
Home URL : http://wap.three.co.id
Bearer : GPRS only
Proxy : Disable
2. Click GPRS Setting
Security : Non-secure
Type in DSN 1 : 0.0.0.0
APN : 3gprs
Login ID : 3gprs
Password : 3gprs
1. Go to main menu, click Messages > Multimedia Messages > Setting > MMS Profile >
Current Profile > Profile Setting > Operator (If Available)
Type in Profile Name : 3mms
Server URL : http://mms.three.co.id
Proxy : Enable
2. Click GPRS Setting
IP Address : 0.0.0.0
APN (3mms)
Password : 3mms
Login name : 3mms
Password : 3mms
VI. Motorola
* On standby mode
1. Go to Menu > Web Access > Select > Web Sessions > Select
2. Click New Entry > Select > Entry Detail, fill the parameters with this value:
Name : 3GPRS
Homepage : http://wap.three.co.id
Gateway IP :
Port 1 :
Timeout : 15 minutes
GPRS APN : 3gprs
User Name : 3gprs
Password : 3gprs
(Leave other parameters
blank)
Press Done
3. Click 3GPRS > Menu >Set Default > Select
* On standby mode
1. Go to Menu > Web Access > Select > Web Sessions > Select > New Entry > Select >
Entry Detail, and fill in the parameters with this value:
Name : 3mms
Homepage : http://mms.three.co.id
Gateway IP : 10.4.0.10
Port 1 : 3128
Timeout : 15 minutes
GPRS APN : 3mms
User Name : 3mms
Password : 3mms
(Leave other parameters
blank)
Press Done
2. Click Message > Menu > Message Setup > Select > MMS Message Setup > Change >
Server Info > Select
3. Pick one of the available listed items, and press Menu > Edit > Select > Service Name,
and OK
4. Type in 3MMS, and OK
5. Click Server Name, and OK
6. Type in http://mms.three.co.id, and OK
7. Pick Session Name, and OK
8. Pick 3MMS that was created at the first step, and Select
9. Press Done