Scribd
Upload
317 views

Defect Trend Chart Product 1

The document is a defect trend chart for a product showing defect rates over time. It shows that in February the total rejects were 30,897 with the top defects being foreign matter/black dots at 17,108 and dent/chipped at 8,425. In March total rejects decreased to 14,264 with the leading defects being foreign matter/black dots at 5,244 and deformed dimensions at 2,384. In April total rejects increased to 34,400 with the highest defects being deformed dimensions at 21,910 and foreign matter/black dots at 7,100.

Uploaded by

j_buan
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
317 views

Defect Trend Chart Product 1

The document is a defect trend chart for a product showing defect rates over time. It shows that in February the total rejects were 30,897 with the top defects being foreign matter/black dots at 17,108 and dent/chipped at 8,425. In March total rejects decreased to 14,264 with the leading defects being foreign matter/black dots at 5,244 and deformed dimensions at 2,384. In April total rejects increased to 34,400 with the highest defects being deformed dimensions at 21,910 and foreign matter/black dots at 7,100.

Uploaded by

j_buan
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

DEFECT TREND CHART

product 1
Oil mark/ Stain
Cold Slug 40000
Silverstreak
Smoke Mark
Jig Loose 35000
Jig Tight
2. FOREIGN MATTER
Over Cut/ Over
Rework 30000
Foreign Matter/ Black
3. FLASH ON CAV. K
Dot 25000
Flow Mark/ Haze
Gas Burn
Discoloration 20000
Crack
Flash
Short Mold 15000
Sink Mark 1. NG DIMENSION
Deformed/ Warp/ NG WARP NG - CAV. I & K
Dimension 10000
Dent/ Chipped
Scratches/ Drag Mark/
Swell
5000
Glossy/ Shiny
Stress Mark 0
White dot
FEBRUARY
15000 MARCH APRIL 10000 10000 10000
Total Reject 30,897 14,264 34,400
Qinput 361,721 229,572 299,782 0 0 0 0
Qoutput 330,824 215,308 265,382
% Defective 8.54% 6.21% 11.48% #DIV/0! #DIV/0! #DIV/0! #DIV/0!
Yield Rate 91.46% 93.79% 88.52% #DIV/0! #DIV/0! #DIV/0! #DIV/0!
DPPM 85,417 62,133 114,750 #DIV/0! #DIV/0! #DIV/0! #DIV/0!
DPPM
Defect FEBRUARY MARCH APRIL
Bubbles 210 163 923
Weld Line 0 0 0
White dot 1686 990 1050
Stress Mark 0 0 0
Glossy/ Shiny 1 0 0
Scratches/ Drag Mark/ Swell 2204 1849 575
Dent/ Chipped 8425 2823 909
Deformed/ Warp/ NG Dimension 0 2384 21910
Sink Mark 0 0 0
Short Mold 46 0 0
Flash 1 0 1296
Crack 0 48 0
Discoloration 23 0 44
Gas Burn 0 0 0
Flow Mark/ Haze 0 326 135
Foreign Matter/ Black Dot 17108 5244 7100
Over Cut/ Over Rework 0 0 0
Jig Tight 0 0 0
Jig Loose 0 0 0
Smoke Mark 0 0 0
Silverstreak 907 282 181
Cold Slug 0 0 0
Oil mark/ Stain 286 155 277
30897 14264 34400 0 0 0

You might also like