Scribd
Upload
56 views2 pages

ABSTRACT

This document describes a wireless electronic notice board project. The notice board uses an AT89S52 microcontroller to control the display and wireless transmission. A dot matrix LED display is designed using a printed circuit board and driver circuit. Text can be entered and different scrolling effects selected using a connected PC keyboard. The transmitter module consists of a keypad, LEDs, microcontroller, encoder and transmitter. The receiver module consists of a receiver, decoder, microcontroller and dot matrix display. The notice board allows wireless control of information display within a 25m range.

Uploaded by

kasyapsam
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
56 views2 pages

ABSTRACT

This document describes a wireless electronic notice board project. The notice board uses an AT89S52 microcontroller to control the display and wireless transmission. A dot matrix LED display is designed using a printed circuit board and driver circuit. Text can be entered and different scrolling effects selected using a connected PC keyboard. The transmitter module consists of a keypad, LEDs, microcontroller, encoder and transmitter. The receiver module consists of a receiver, decoder, microcontroller and dot matrix display. The notice board allows wireless control of information display within a 25m range.

Uploaded by

kasyapsam
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

SWARNA BHARATHI INSTITUTE OF SCIENCE AND TECHNOLOGY

DEPARTMENT OF ELECTRONICS AND COMMUNICATION


ENGINEERING

ABSTRACT

The project is built around the AT89S52 micro controller from Atmel. This micro
controller provides all the functionality of the display and wireless control. It also takes care of
creating different display effects for given text. Matrix type display is designed using 5mm LED
on a printed circuit board. A driver circuit is designed to drive all these LEDs. A simple PC key
board can be connected to this system to enter the required text or notice. Several scrolling
effects can be selected using function keys of keyboard. The scrolling speed of the text also can
be changed according to user requirement.

This project is designed to develop a Wireless Electronic Notice Board. It is widely used
to display latest information anywhere such as faculty, shop, mosque and other places. This
Wireless Electronic Notice Board offers the flexibility to user to control the information display
within 25m range. The information is transmitted using RF as wireless technique. The Wireless
Electronic Notice Board consists of two module; transmitter and receiver module. There are five
parts in transmitter module and four parts in receiver module. In transmitter module, there are
keypad, Light Emitting Diodes (LED), Microcontroller, encoder and transmitter. In receiver
module there are receiver, decoder, microcontroller, and dot matrix.

PROJECT ASSOCIATES:

D.SANTHOSH 07M61A0407
M.CHANDANA 07M61A0404
D.SADHANA 07M61A0429
P.NAGARAJU 08M65A0404

You might also like