Q.1 Which three statements are true about local and network applications?

(Choose three.)

A local application is loaded in a local computer and can be accessed by a

remote computer on the network.

A network application is loaded in a local computer and accessed from a

remote computer.

A local application is loaded in a local computer and accessed only by the

local computer.

A network application is loaded in a local computer and accessed only by the

local computer.

An example of a local application is e-mail.

An example of a network application is instant messaging.

Q.2 A wireless DHCP client cannot connect to the Internet through a Linksys
integrated router. When you type ipconfig on the host, no IP address, subnet
mask, or default gateway shows. What are two of the first things you will check?
(Choose two.)

SSID

if the wireless client is configured for DHCP

the cable between client and integrated router

the firewall configuration on the integrated router

if the correct default gateway is configured on the client

if the correct default gateway is configured on the integrated router

Q.3 Refer to the graphic. Assume that the command output is from a wireless
DHCP client that is connected to a Linksys integrated router. What can be
deduced from the output?

The wireless connection is good.

The WEP key or SSID needs to be checked.

The DHCP configuration on the router needs to be checked.

The wireless NIC driver or the NIC itself needs to be reinstalled.

Q.4 What measurement is commonly used to describe communication speed

when transferring data?

bps

cps

Hz

MB

Q.5 What is an accurate description of network devices in the distribution layer?

 They are designed to interconnect individual hosts.

They are designed to interconnect multiple companies.

They are designed to interconnect local network segments.

They are designed to switch data packets as fast as possible.

Q.6 When acting as a DHCP server, an integrated router can provide what three
types of information to a client? (Choose three.)

physical address

MAC address

default gateway

static IP address

dynamic IP address

DNS server address

Q.7 Where do ISPs get the public addresses that they assign to end users?

ISPs create the addresses themselves.

ISPs are assigned addresses through the RFC.

ISPs obtain their addresses automatically.

ISPs obtain address blocks from registry organizations.

Q.8 Refer to the graphic. What is the effect of setting the security mode to WEP
on the Linksys integrated router?

It identifies the wireless LAN.

It allows the access point to inform clients of its presence.

It translates IP addresses into easy-to-remember domain names.

It encrypts data between the wireless client and the access point.

It ensures that only authorized users are allowed access to the WLAN.

It translates an internal address or group of addresses into an outside, public

address.

Q.9 When are leased lines typically used?

when low bandwidth is required

for home and small business connectivity

when a dedicated digital data line is necessary

as a less expensive option to cable and DSL modem service

Q.10 Which wireless protocol is used for encryption?

EAP
 Open

PSK

WEP

Q.11 The area covered by a single AP is known as what?

ad-hoc network

basic service set

independent basic service set

extended service set

distribution system

Q.12 Which installation option should be chosen when the current operating
system is too damaged to work properly?

upgrade

multi-boot

clean install

virtualization

Q.13 What layer is the first point of entry for a host into the network?

core layer

access layer
 network layer

distribution layer

Q.14 What two commands can be used to form a new binding if client information
does not agree with the DHCP client table? (Choose two.)

ipconfig /release

ipconfig /all

ipconfig /flushdns

ipconfig /renew

ipconfig

15. What are two advantages of purchasing a custom-built computer? (Choose

two.)

usually a lower cost

no waiting period for assembly

user can specify higher performance components

supports higher-end graphics and gaming applications

fewer components to replace

Q.16 What information within a data packet does a router use, by default, to
make forwarding decisions?

the destination MAC address

 the destination IP address

the destination host name

the destination service requested

Q.17 What is a service pack?

an access policy

an agreement between a company and a vendor

a piece of code created to fix one specific problem

a collection of patches and updates released by a vendor

a small piece of software designed specifically for security issues

Q.18 What is an ISP?

It is a standards body that develops cabling and wiring standards for

networking.

It is a protocol that establishes how computers within a local network

communicate.

It is an organization that allows individuals and businesses to connect to the

Internet.

It is a networking device that combines the functionality of several different

networking devices in one.

Q.19 Which two statements correctly describe Media Access Control (MAC)
addresses? (Choose two.)

MAC addresses are used to identify a specific NIC.

 MAC addresses are physical addresses.

MAC addresses contain a network number and unique host identification.

MAC addresses are always assigned to network devices by a network

administrator.

MAC addresses can be dynamically assigned.

Q.20 What is the name for the contract between a customer and an ISP that
specifies requirements for uptime and service response time?

DSL

IAB

NAP

SLA

Q.21 What are two ways that a user can interact with an operating system shell?
(Choose two.)

CLI

OS

GUI

NIC

kernel

Q.22 Select the connection that would require a straight-through cable.

 a switch to a hub

a router to a switch

a switch to a switch

a router to a router

23. Choose the option that shows the correct sequence of steps in the
encapsulation of TCP/IP data that is passed from a source to a destination host?

A. converts data to bits for transmission

B. packages the data for end to end transport
C. adds the data-link header and trailer
D. adds the network IP address to the header of the frame

A,B,C,D

A,C,D,B

B,D,C,A

B,C,D,A

D,C,B,A

Q.24 What is specified by the network number in an IP address?

the network to which the host belongs

the physical identity of the computer on the network

the node of the subnetwork which is being addressed

the broadcast identity of subnetwork

Q.25 Refer to the graphic. What is the purpose of assigning a Network Name of
Academy?

It identifies the wireless LAN.

It translates IP addresses into easy-to-remember domain names.

It encrypts data between the wireless client and the access point.

It allows access to the AP configuration GUI by name rather than address.

It translates an internal address or group of addresses into an outside, public

address.

Q.26 Which of the following statements best describes DNS?

DNS servers are used to map an IP address to a physical address.

DNS servers are used to map a name to an IP address.

DNS servers are used to configure logical address information for host
computers.

DNS servers are used to translate from private addresses to public addresses.

Q.27 Which of the following are the address ranges of the private IP addresses?
(Choose three.)

10.0.0.0 to 10.255.255.255
 200.100.50.0 to 200.100.25.255

150.150.0.0 to 150.150.255.255

172.16.0.0 to 172.31.255.255

192.168.0.0 to 192.168.255.255

127.16.0.0 to 127.31.255.255

Q.28 Which protocol is used to transfer files among network devices and perform
file-management functions?

DNS

FTP

HTML

HTTP

Q.29 Select three statements that correctly describe how DHCP services may be
provided. (Choose three.)

An integrated router provides IP configurations for most ISPs.

An integrated router can act as both DHCP server and DHCP client.

A home PC using a static IP address obtained that address from a DHCP

server.

Most home network integrated routers receive an IP configuration directly

from their ISP.

A variety of devices can act as DHCP servers, as long as they run DHCP
service software.
 A home PC is required by standards to obtain an IP address and default
gateway from a DHCP server (usually the ISP).

Q.30 Refer to the graphic. Based on the information that is shown, what
statement is true?

This configuration would be commonly found in an ad hoc wireless network.

Any wireless client that is attached to this access point would have the same
IP address and SSID.

All wireless devices that are connected to this access point must have an
assigned SSID of Academy.

In addition to accepting wireless client requests, this access point must

connect to the wired network.

Q.31 Identify two causes of physical layer network problems. (Choose two.)

logical addressing issues

improperly terminated cables

cables plugged into wrong ports

incorrect MAC address assigned

packets received out of sequence

 incorrect subnet mask on an interface

Q.32 Which part of the electromagnetic spectrum is commonly used to exchange

data between a PDA and a computer?

FM

radar

infrared

ultraviolet

Q.33 Which of the following are transport layer protocols of the TCP/IP model?
(Choose two.)

FTP

UDP

SMTP

TFTP

TCP

Q.34 For the second time in a week, workstations on a LAN are not able to log
into the server. The technician fixed the problem the first time, but cannot
remember the steps taken to solve it. What aspect of the troubleshooting process
has the technician neglected?

identifying the problem

asking end-users questions

 documenting the troubleshooting process

using structured techniques to solve a problem

Q.35 What action will a router take when it receives a frame with a broadcast
MAC address?

It will not forward the frame to another network.

It forwards the frame back to the sending host with its IP address as a
response.

It forwards the frame out of all interfaces except the interface where the
frame was received.

It forwards the frame back out the receiving interface to insure all hosts on
the local network receive it.

Q.36 A network host is accessing a web server. What two protocols are most
likely being used as the TCP/IP model application layer protocol and the
internetwork layer protocol? (Choose two.)

IP

FTP

TCP

DHCP

HTTP

Q.37 Which statement is true concerning stateful packet inspection?

Access is permitted based on IP addresses of the source and destination

devices.
 Access is permitted based on the MAC addresses of the source and
destination devices.

Access is permitted only if the type of application that is attempting to reach

the internal host is allowed.

Access is permitted only if it is a legitimate response to a request from an

internal host.

Q.38 What does the term "attenuation" mean in data communication?

loss of signal strength as distance increases

time for a signal to reach its destination

leakage of signals from one cable pair to another

strengthening of a signal by a networking device

39. What is the default subnet mask for a class B address?

255.0.0.0

255.255.0.0

255.255.255.0

255.255.255.255
Q.40 Refer to the graphic. Based on the configuration information that is shown,
which three types of 802.11 networks are allowed access to the WLAN? (Choose
three.)

802.11a

802.11b

802.11e

802.11g

802.11n

802.11x

Q.41 Within a local network, which two items must be unique on a computer for it
to successfully connect to the network? (Choose two.)

IP address

subnet mask

computer name

default gateway address

operating system version

Q.42 When considering the purchase of a new operating system, what is meant
by "Total Cost of Ownership?"

applications and support costs

hardware and support costs

hardware and software costs

hardware, software, and support costs

hardware, operating system, and applications costs

Q.43 A computer joins the network and announces itself to all hosts on the LAN.
What type of message does the computer send out?

broadcast

simulcast

multicast

unicast

Q.44 Refer to the graphic. What feature can be installed on the Linksys
integrated router to convert private IP addresses to Internet-routable addresses?

authentication
 DHCP

encryption

firewall

NAT

WEP

Q.45 When terminating UTP cabling, why is it important to untwist only a small
amount of each wire pair?

minimizes crosstalk

makes installation faster

ensures wires are in correct order

makes it easier to fit wires into connector

Q.46 A host sent a message that all other hosts on the local network received
and processed. What type of domain are all these hosts a part of?

local domain

multicast domain

collision domain

broadcast domain

Q.47 Your school network blocks all websites related to online gaming. What type
of security policy is being applied?
 identification and authentication

remote access

acceptable use

incident handling

Q.48 Refer to the graphic. Assume that the exhibited output is from a host that is
connected to a Linksys integrated router. What is one of the first things you
should check?

IP address on the host

IP address on the router

subnet mask on the host

default gateway on the host

link status LED on the front of the router

Q.49 The transmit pins are disconnected and only the receive pins are used.
 The transmit pins are disconnected and only the receive pins are used.

The transmit pins on one device are connected to the transmit pins on the
other device.

The receive pins on one device are connected to the receive pins on the other
device.

The transmit pins on one device are connected to the receive pins on the
other device.

50. What are two examples of storage peripheral devices? (Choose two.)

printer

flash drive

headphones

external DVD

barcode reader

Q.51 What are the two possible values for a digital bit? (Choose two.)

9
Q.52 What type of computer would most likely use a docking station?

laptop

server

desktop

mainframe

workstation