Scribd
Upload
51 views3 pages

Like You Can Click This So That U Can Get Up To The Test Script Name

This document provides instructions for creating requirements, converting requirements to test cases, calling test cases as templates, and running test cases in Quality Centre. It explains how to log in, create main and child requirements, fill out requirement details, convert requirements to test plans, call existing test cases as templates, select and run test cases in the test lab, record pass/fail results, and create defect reports.

Uploaded by

vijayap71
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
51 views3 pages

Like You Can Click This So That U Can Get Up To The Test Script Name

This document provides instructions for creating requirements, converting requirements to test cases, calling test cases as templates, and running test cases in Quality Centre. It explains how to log in, create main and child requirements, fill out requirement details, convert requirements to test plans, call existing test cases as templates, select and run test cases in the test lab, record pass/fail results, and create defect reports.

Uploaded by

vijayap71
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 3

QUALITY CENTRE

HOW TO MAKE REQUIREMENTS

1. LOGIN TO QC

2. FIRST GO TO THE REQUIREMENT TAB

3. THEN CLICK ON THE NEW REQUIREMENT

4. GIVE THE NAME OF THE REQUIREMENT THAT U R CREATING (for eg. Login is the
main requirement ,then that would be your new requirement) under that the

5. CHILD REQUIREMENT (same eg. Regular login,paid login etc) b4 CREATING THE
CHILD REQUIREMENT YOU HAVE TO HIGHLITE THE MAIN REQUIREMENT BCOZ
THESE REGULAR AND PAID LOGIN ARE UNDER THE MAIN REQUIREMENT LOGIN.

6. YOU CAN ALSO FILL OUT THE REQUIREMENT DERSCRIPTION IN THE REQ DETILS
WHICH IS IN THE REQ TAB IN THE MENU BAR.

7. IF AT ALL YOUWANT THE SAME ORDER (LIKE LOGIN ,UNDER THAT REGULAR
LOGIN ,PAID LOGIN )LIKE THIS IN THE TEST PLAN TREE THEN FOLLOW THESE
STEPS OR ELSE JUST GO TO TEST PLAN TREE AND CREATE A NEW FOLDER AND
THEN CHILD FOLDER AND START WRITING DOWN THE DESIGN STEPS THAT IS
THE TEST CASE FOR AL L THE REQUIREMENTS.

8. YOU HAVE TO CLICK THE CONVERT TO TEST WHICH IS IN THE REQUIREMENT


MENU IN THE MENU BAR .

9. IN THAT YOU HAVE TO CLICK THE CONVERT THE SELECTED REQUIREMENT .

10.IN THIS WINDOW YOU HAVE 3 OPTIONS

11.THE FIRST ONE IS THE CHILD DESIGN STEP MAKING THE SELECTED REQ TO
DESIGN STEP

LIKE YOU CAN CLICK THIS SO THAT U CAN GET UP TO THE TEST
SCRIPT NAME

(YOU CAN SEE THE SAME WAY THAT U CREATED THE MAIN REQ U IN THE REQ
TAB)

THEN IN THE NEXT WINDOW CHOOSE THE DESTINATION PATH YOU CAN SEE
A BOX WITH …. IN THE SUBJECT AT THE RIGHT SIDE END CLICK THAT

1. THEN U GO TO BATCH72 AND THEN YOUR FOLDER (IF ITS YOUR FIRST REQ LIKE
THE LOGIN JUST HIGHLITE YOUR NAME AND CLICK FINISH, IF ITS FOR YOUR
SECOND ONE LIKE THE PAID LOING THEN YOU HAVE TO HIGHLITE THE LOGIN
UNDER YOUR NAME FOLDER AND THEN CLICK ON FINISH ,DO THE SAME FOR THE
REGULAR LOGIN ALSO)

2. THEN IN THE CONVERSION WINDOW YOU WILL SEE THAT FINISHED SUCCESSFUL
LY AND CLICK OK.

3. THEN YOU GO TO THE TEST PLAN TREE AND GO TO BATCH 72 AND YOUR
FOLDER AND U CAN WHAT U HAVE CREATED HERE IN THE SAME ORDER THERE
AND YOU CAN CLICK ON AND START WRITING THE DESIGN STEPS THAT IS THE
TEST CASE FOR THAT.

4. YOU HAVE TO CLICK ON THE SPECIFIC REQ AND CLICK ON THE NEW TEST THE
2ND ICON IN THE TEST PLAN WINDOW.

CALLING THE TEST CASE ALREADY WRITTEN

1. YOU HAVE TO FIRST GO TO YOUR TEST CASE THAT IS ALREADY WIRTTEN IN


THE TEST PLAN WINDOW IN THE LEFT SIDE AND RIGHT CLICK ON THAT AND
SELECT MAKE A TEMPLATE.

2. MAKE SURE YOU HAVE HIGHLITED THE THE TEST NAME AND COME THENGO
TO THE DESIGN STEP AND NOW CLICK ON THE CALL TO TEST .

3. THE WINDOW SELECT A TEST WILL OPEN AND YOU HAVE TO SELECT THE
FOLDER OF YOUR NAEM ANDTHEN THE TEST NAME WERE YOU HAVE TO
CALL THESE STEPS AND THEN CLICK OK.

4. YOU CAN AUTOMATICALLY SEE THE TEST STEPS ON THE DESIGN STEP
WINDOW.

THEN THE TEST LAB

1. CLICK ON THE TEST LAB TAB .

2. THEN YOU CAN SEE THE SELECT TESTS IN THE MENU BAR AND CLICK ON
THAT U CAN SEE THE TEST PLAN TREE AND THE REQ TREE IN THE RIGHT SIDE

3. IN THE TEST PLAN TREE U CAN SELECT YOUR FOLDER AND THEN THE TEST
CASE TO EXECUTE AND THEN CLICK ON THE ARROW ON THE TOP.

4. THE TEST CASE WILL AUTOMATICALLY GET IN THE EXECUTION GRID OF THE
TEST LAB .

5. THEN U HAVE TO CLICK ON THE RUN BUTTON ON THE TOP IN THE MENU BAR.
6. THEN THE MANUAL RUNNER WINDOW WILL OPEN AND YOU CAN SEE THE
BEGIN RUN AND END RUN.

7. CLICK ON THE BEGIN RUN.

8. YOU HAVE TO CLICK ON THE STEP AND IF ITS MANUAL TEST THEN U HAVE TO
CARRY OUT THE TEST STEPS MANUALLY AND IF IT MATCHES THE EXPECTED
RESULT YOU CAN CLICK THE GREE TICK SYMBOL ON THE TOP TO MAKE THE
TEST PASS IF IT FAILS THEN CLICK ON THE REX INTO MARK .

9. THEN CREATE A DEFECT REPORT BY CLICKING ON THE 7TH ICON THE NEW
DEFECT BUTTON.

10.THEN FILL OUT THE DEFECT REPORT WITH ALL THE DETAILS REQUIRED.

11.YOU CAN ALSO MINIMIZE THE RUN WINDOW BY CLICKING THE 2BOX ICON
AND THE PIN ICON TO ALWAYS BE ON THE TOP AND THEN THE RED BUTTON
TO STOP .

12.THEN YOU HAVE TO COME TO THE REQ TAB AND IN THE VIEW MENU YOU
CAN SEE THE COVERAGE ANALYSIS TO SEE HOW MANY IS PASSED AND
FIALED.

You might also like