Scribd
Upload
38 views1 page

T1303 6in - DBL - Act - SPRG - Hinge

This document is a revision template for a 6-inch double acting spring hinge. It includes dimensions for the hinge in both inches and millimeters. Notes specify a maximum door thickness of 2 inches with chamfer or 1-3/4 inches, a minimum door thickness of 1-1/4 inches, and that the door should be 125 pounds or less. The template also specifies using 3 hinges per door and 10 #10 screws.

Uploaded by

Agustin Achio
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
38 views1 page

T1303 6in - DBL - Act - SPRG - Hinge

This document is a revision template for a 6-inch double acting spring hinge. It includes dimensions for the hinge in both inches and millimeters. Notes specify a maximum door thickness of 2 inches with chamfer or 1-3/4 inches, a minimum door thickness of 1-1/4 inches, and that the door should be 125 pounds or less. The template also specifies using 3 hinges per door and 10 #10 screws.

Uploaded by

Agustin Achio
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

REVISIONS

REV. DESCRIPTION DATE APPROVED


A FOR COMPUTER 03/21/06

1 1/4"
31.8

1/4"
6.7 2 1/8" 3 1/4" 2 1/4" 0.11
54 82.6 57.2 [2.8]

1" 1"
25.4 25.4

13/32" 13/32"
10.7 10.7
2 15/32" 2 15/32" NOTES:
62.4 62.4 MAXIMUM DOOR THICKNESS
1 9/16" 1 9/16" WITH CHAMFER - 2" [50.8]
11/16" 11/16"
39.6 39.6
17.5 17.5
6" MAXIMUM DOOR THICKNESS - 1-3/4" [44.5]
152.4 5 19/32" 6"
142.2 152.4 MINIMUM DOOR THICKNESS - 1-1/4" [31.8]
1 9/16" 1 9/16" DOOR - 125LBS. OR LESS
2 15/32" 39.6 39.6 2 15/32"
62.4 62.4 3 HINGES PER DOOR

FOR #10 SCREWS


1 5/8" 1 5/8" 10 PLCS
41.3 41.3
7/8"
22.5

CLOSED POSITION DOOR


DRAWN DMH 03/21/06
HAGER RESERVES THE RIGHT TO ENG. APPR.
1303 6" DOUBLE ACTING
MAKE DESIGN CHANGES WITHOUT
NOTICE. CALL HAGER ENGINEERING
MATERIAL
STEEL
Q.A. SPRING HINGE TEMPLATE
SEE NOTES AT 1-800-325-9995 FOR THE LATEST TOLERANCES:
REVISION DATE OF TEMPLATE. FINISH
FRACTIONAL: 0.015"
DWG. NO. CUSTOMER SPECIFIED SIZE DWG. NO. REV.
ANGULAR: MACH: 1 BEND: 1 T1303 6IN_DBL_ACT_SPRG_HINGE
PRIMARY DIMENSIONS SHOWN IN INCHES, TWO PLACE DECIMAL: 0.01" B A
DO NOT SCALE DRAWING
DIMENSIONS IN [ ] ARE MILLIMETERS. THREE PLACE DECIMAL: 0.004" SCALE:1:2 WEIGHT: N/A SHEET 1 OF 1

You might also like