Scribd
Upload
37 views

2 X 5 10 Marks

This document provides four multi-part questions related to electrical circuits for a 10 mark exam. The questions cover topics like DC circuits, RL circuits, impedance calculations, series RC circuits, pole-zero plots, and star-delta transformations. The student is asked to answer any two of the four questions in detail.

Uploaded by

rajesh_prakhya4054
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
37 views

2 X 5 10 Marks

This document provides four multi-part questions related to electrical circuits for a 10 mark exam. The questions cover topics like DC circuits, RL circuits, impedance calculations, series RC circuits, pole-zero plots, and star-delta transformations. The student is asked to answer any two of the four questions in detail.

Uploaded by

rajesh_prakhya4054
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

Answer any Two (2) of the following

2 X 5= 10 Marks

1. (a) A Dc voltage of 100V is applied in the circuit shown in figure and


the switch is kept open. The switch K is closed at t = 0. Find the
complete expression for the current.
[3 M]

(b) A Dc voltage of 20V is applied in a RL circuit where R = 5 and L


= 10H.
Find (i). The Time Constant
(ii). The Maximum value of stored Energy.
[2M]

2. Three impedances of (7+j4), (3+j2) and (9+j2) are connected


between neutral and the R, Y and B phases. The line voltage is 440V,
Calculate.
(i). The line currents and
(ii). The current in the neutral wire.
(iii). Find the power consumed in each phase & total power drawn by
the circuit. [5M]

3. A series RC circuit has following circuit parameters. R=1Ω, C=


1F.Determine the current when the switch is closed at a time
corresponding to φ =0. Assume initial charge on the capacitor is Q0= 2
coulombs with upper plate has + Ve polarity.
V= 50 Cos ( 50t+φ ). Consider AC transient.
[5M]

4 (a) Find the expression for transformed current whose transfer


function is given by
I(S)= 40S/(S+4)(S+1) using pole zero plot.
[3M]

(b) For the given network find the Transformed impedance.


[2M]

(Hint: Use Star- Delta Transformation)

You might also like