Scribd
Upload
27 views

Addinga Network Printerin Mac OSX

To add a network printer in Mac OS X, you need the printer's name and model number. Open Printer Setup Utility and click "Add" to begin adding the printer. Select the correct protocol, address, queue name, and printer name. Choose the printer model from the pull down menu and click "Add" to complete the setup. Contact the Help Desk if you have any issues.

Uploaded by

Cut Bang Saiful Amri
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
27 views

Addinga Network Printerin Mac OSX

To add a network printer in Mac OS X, you need the printer's name and model number. Open Printer Setup Utility and click "Add" to begin adding the printer. Select the correct protocol, address, queue name, and printer name. Choose the printer model from the pull down menu and click "Add" to complete the setup. Contact the Help Desk if you have any issues.

Uploaded by

Cut Bang Saiful Amri
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Adding a Network Printer in Mac OS X

In order for you to add a network printer, you will first need to know the name of
your printer and its model. All network printers should have a label with the
printers name starting with P. All of TCNJ’s network printers are model 4000,
4050, 4100, 4200 and 4250 with a few exceptions. Please note the model number
on the front of the printer.

Once you obtain the printers name and model, please browse to
/Applications/Utilities/Printer Setup Utility. The following
window will open with all of your current printers.

Click on Add to add a new printer. Refer to the next image to


follow the next steps.

1. Next to Protocol, make sure Line Printer Daemon – LPD is


chosen
2. Next to Address please enter 159.91.15.40
3. Next to Queue please enter the name on the label starting
with P
4. Next to Name, enter in again, the name of the Printer. This is
what will show up in your Printer Dialog Box when you go
to print. You may use a more descriptive name than the
Queue name if you wish.
5. Next to Print Using is a pull down menu. Please choose HP
from this list.
6. Scroll down through the list of printers. Choose the model of
your network printer.
7. Click Add.
8. You should now see your printer in your Print Dialog when
you go to print.
9. Please contact the Help Desk at x2660 if you have any issues
adding a network printer

You might also like