Scribd
Upload
98 views

Type-I Modem Configuration - Huawei Smartax Mt880 Modem / Smartax Mt882 Adsl Modem Configuration

The document provides instructions for configuring a Huawei SmartAX MT880 or MT882 ADSL modem for internet connectivity. It details setting the computer's IP address, logging into the modem interface, configuring the WAN settings including PPPoE connection type, VPI/VCI, username and password, enabling the DNS, applying the settings, rebooting the modem, and verifying the successful connection by checking the PVC0 status and modem LED light.

Uploaded by

Laxmikant Dharashivkar
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
98 views

Type-I Modem Configuration - Huawei Smartax Mt880 Modem / Smartax Mt882 Adsl Modem Configuration

The document provides instructions for configuring a Huawei SmartAX MT880 or MT882 ADSL modem for internet connectivity. It details setting the computer's IP address, logging into the modem interface, configuring the WAN settings including PPPoE connection type, VPI/VCI, username and password, enabling the DNS, applying the settings, rebooting the modem, and verifying the successful connection by checking the PVC0 status and modem LED light.

Uploaded by

Laxmikant Dharashivkar
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 1

TYPE-I Modem Configuration - Huawei SmartAX MT880 Modem / SmartAx MT882 ADSL

Modem Configuration

TYPE-I Modem Configuration - Huawei SmartAX MT880 Modem / SmartAx MT882 ADSL Modem
Configuration

SmartAx MT880 ADSL Modem has One ethernet Port.


SmartAx MT882 ADSL Modem has One ethernet Port and one USB Port.

Set your computer IP address as 192.168.1.2


( If you are using USB port, install USB driver first)

Open Internet Explorer in the Address bar type the URL http://192.168.1.1

You will be propted for Username and Password.

Username: admin

Password: admin

Click on Home

Click on WAN setting

Your WAN Setting should be as follows:

PVC No.: PVC0

Wan type: PPP

Connection Type : PPPoE

VPI / VCI : 0/35

Default Route : Enabled

Username: yourusername@dataone

Password: yourpassword

Use DNS : Enabled

Click on Apply.

You will be asked to save and reboot.

Select Yes

Once your modem is rebooted , the summary page will be displayed .

The "Green" status of PVC0 status indicated that you are now connected. (in Summary page)

SmartAx MT882 ADSL Modem ADSL LED will turn 'Orange' from 'green' when succesfully
connected.

You might also like