Windows Server Technical Interview Questions & Answers, Set –III

Windows Server Support Interview Questions and Answers (L2)

What is the difference between Authorized DHCP and Non Authorized DHCP?
To avoid problems in the network causing by mis-configured DHCP servers, server in windows 2000 must be validate by
AD before starting service to clients. If an authorized DHCP finds any DHCP server in the network it stop serving the
clients

Difference between inter-site and intra-site replication. Protocols using for replication.
Intra-site replication can be done between the domain controllers in the same site. Inter-site replication can be done
between two different sites over WAN links
BHS (Bridge Head Servers) is responsible for initiating replication between the sites. Inter-site replication can be done
B/w BHS in one site and BHS in another site.
We can use RPC over IP or SMTP as a replication protocols where as Domain partition is not possible to replicate using
SMTP

How to monitor replication

We can user Replmon tool from support tools

Brief explanation of RAID Levels

Microsoft Windows XP, Windows 2000 and Windows Server 2003 offer two types of disk storage: basic and dynamic.

Basic Disk Storage

Basic storage uses normal partition tables supported by MS-DOS, Microsoft Windows 95, Microsoft Windows 98, Microsoft
Windows Millennium Edition (Me), Microsoft Windows NT, Microsoft Windows 2000, Windows Server 2003 and Windows
XP. A disk initialized for basic storage is called a basic disk. A basic disk contains basic volumes, such as primary
partitions, extended partitions, and logical drives. Additionally, basic volumes include multidisk volumes that are
created by using Windows NT 4.0 or earlier, such as volume sets, stripe sets, mirror sets, and stripe sets with parity.
Windows XP does not support these multidisk basic volumes. Any volume sets, stripe sets, mirror sets, or stripe sets with
parity must be backed up and deleted or converted to dynamic disks before you install Windows XP Professional.

Dynamic Disk Storage

Dynamic storage is supported in Windows XP Professional, Windows 2000 and Windows Server 2003. A disk initialized for
dynamic storage is called a dynamic disk. A dynamic disk contains dynamic volumes, such as simple volumes, spanned
volumes, striped volumes, mirrored volumes, and RAID-5 volumes. With dynamic storage, you can perform disk and
volume management without the need to restart Windows.

Note: Dynamic disks are not supported on portable computers or on Windows XP Home Edition-based computers.
You cannot create mirrored volumes or RAID-5 volumes on Windows XP Home Edition, Windows XP Professional, or
Windows XP 64-Bit Edition-based computers. However, you can use a Windows XP Professional-based computer to create
a mirrored or RAID-5 volume on remote computers that are running Windows 2000 Server, Windows 2000 Advanced
Server, or Windows 2000 Datacenter Server, or the Standard, Enterprise and Data Center versions of Windows Server
2003.

Storage types are separate from the file system type. A basic or dynamic disk can contain any combination of FAT16,
FAT32, or NTFS partitions or volumes.

A disk system can contain any combination of storage types. However, all volumes on the same disk must use the same
storage type.

To convert a Basic Disk to a Dynamic Disk:

Use the Disk Management snap-in in Windows XP/2000/2003 to convert a basic disk to a dynamic disk. To do this, follow
these steps:
1. Log on as Administrator or as a member of the Administrators group.
2. Click Start, and then click Control Panel.
3. Click Performance and Maintenance, click Administrative Tools, and then double-click Computer Management. You
can also right-click My Computer and choose Manage if you have My Computer displayed on your desktop.
4. In the left pane, click Disk Management.
5. In the lower-right pane, right-click the basic disk that you want to convert, and then click Convert to Dynamic Disk.
You must right-click the gray area that contains the disk title on the left side of the Details pane.
6. Select the check box that is next to the disk that you want to convert (if it is not already selected), and then click
OK.
7. Click Details if you want to view the list of volumes in the disk. Click Convert.
8. Click Yes when you are prompted to convert the disk, and then click OK.

Warning: After you convert a basic disk to a dynamic disk, local access to the dynamic disk is limited to Windows XP
Professional, Windows 2000 and Windows Server 2003. Additionally, after you convert a basic disk to a dynamic disk, the
dynamic volumes cannot be changed back to partitions. You must first delete all dynamic volumes on the disk and then
convert the dynamic disk back to a basic disk. If you want to keep your data, you must first back up the data or move it
to another volume.

Dynamic Storage Terms

A volume is a storage unit made from free space on one or more disks. It can be formatted with a file system and
assigned a drive letter. Volumes on dynamic disks can have any of the following layouts: simple, spanned, mirrored,
striped, or RAID-5.
A simple volume uses free space from a single disk. It can be a single region on a disk or consist of multiple,
concatenated regions. A simple volume can be extended within the same disk or onto additional disks. If a simple
volume is extended across multiple disks, it becomes a spanned volume.
A spanned volume is created from free disk space that is linked together from multiple disks. You can extend a spanned
volume onto a maximum of 32 disks. A spanned volume cannot be mirrored and is not fault-tolerant.
A striped volume is a volume whose data is interleaved across two or more physical disks. The data on this type of
volume is allocated alternately and evenly to each of the physical disks. A striped volume cannot be mirrored or
extended and is not fault-tolerant. Striping is also known as RAID-0.
A mirrored volume is a fault-tolerant volume whose data is duplicated on two physical disks. All of the data on one
volume is copied to another disk to provide data redundancy. If one of the disks fails, the data can still be accessed
from the remaining disk. A mirrored volume cannot be extended. Mirroring is also known as RAID-1.
A RAID-5 volume is a fault-tolerant volume whose data is striped across an array of three or more disks. Parity (a
calculated value that can be used to reconstruct data after a failure) is also striped across the disk array. If a physical
disk fails, the portion of the RAID-5 volume that was on that failed disk can be re-created from the remaining data and
the parity. A RAID-5 volume cannot be mirrored or extended.
The system volume contains the hardware-specific files that are needed to load Windows (for example, Ntldr, Boot.ini,
and Ntdetect.com). The system volume can be, but does not have to be, the same as the boot volume.
The boot volume contains the Windows operating system files that are located in the %Systemroot% and %Systemroot
%\System32 folders. The boot volume can be, but does not have to be, the same as the system volume.

RAID 0 – Striping

RAID 1- Mirroring (minimum 2 HDD required)

RAID 5 – Striping With Parity (Minimum 3 HDD required)

RAID levels 1 and 5 only gives redundancy

What are the different backup strategies are available

Normal Backup
Incremental Backup
Differential Backup
Daily Backup
Copy Backup

What is a global catalog

Global catalog is a role, which maintains Indexes about objects. It contains full information of the objects in its own
domain and partial information of the objects in other domains. Universal Group membership information will be stored
in global catalog servers and replicate to all GC’s in the forest.

What is Active Directory and what is the use of it

Active directory is a directory service, which maintains the relation ship between resources and enabling them to work
together. Because of AD hierarchal structure windows 2000 is more scalable, reliable. Active directory is derived from
X.500 standards where information is stored is hierarchal tree like structure. Active directory depends on two Internet
standards one is DNS and other is LDAP. Information in Active directory can be queried by using LDAP protocol

What is the physical and logical structure of AD?

Active directory physical structure is a hierarchal structure which fallows Forests—Trees—Domains—Child Domains—
Grand Child—etc

Active directory is logically divided into 3 partitions

1.Configuration partition 2. Schema Partition 3. Domain partition 4. Application Partition (only in windows 2003 not
available in windows 2000)

Out of these Configuration, Schema partitions can be replicated between the domain controllers in the in the entire
forest. Where as Domain partition can be replicated between the domain controllers in the same domain

What is the process of user authentication (Kerberos V5) in windows 2000?

After giving logon credentials an encryption key will be generated which is used to encrypt the time stamp of the client
machine. User name and encrypted timestamp information will be provided to domain controller for authentication.
Then Domain controller based on the password information stored in AD for that user it decrypts the encrypted time
stamp information. If produces time stamp matches to its time stamp. It will provide logon session key and Ticket
granting ticket to client in an encryption format. Again client decrypts and if produced time stamp information is
matching then it will use logon session key to logon to the domain. Ticket granting ticket will be used to generate
service granting ticket when accessing network resources

What are the port numbers for Kerberos, LDAP and Global Catalog?

Kerberos – 88, LDAP – 389, Global Catalog – 3268

What is the use of LDAP (X.500 standard?)

LDAP is a directory access protocol, which is used to exchange directory information from server to clients or from
server to servers

What are the problems that are generally come across DHCP?
Scope is full with IP addresses no IP’s available for new machines
If scope options are not configured properly eg default gateway
Incorrect creation of scopes etc

What is the role responsible for time synchronization?

PDC Emulator is responsible for time synchronization. Time synchronization is important because Kerberos
authentication depends on time stamp information

What is TTL & how to set TTL time in DNS?

TTL is Time to Live setting used for the amount of time that the record should remain in cache when name resolution
happened.

We can set TTL in SOA (start of authority record) of DNS

How to take DNS and WINS, DHCP backup

%System root%/system32/dns
%System root%/system32/WINS
%System root%/system32/DHCP

What is recovery console

Recovery console is a utility used to recover the system when it is not booting properly or not at all booting. We can
perform fallowing operations from recovery console

We can copy, rename, or replace operating system files and folders

Enable or disable service or device startup the next time that start computer
Repair the file system boot sector or the Master Boot Record
Create and format partitions on drives

What is DFS & its usage

DFS is a distributed file system used to provide common environment for users to access files and folders even when
they are shared in different servers physically.
There are two types of DFS domain DFS and Stand alone DFS. We cannot provide redundancy for stand alone DFS in case
of failure. Domain DFS is used in a domain environment which can be accessed by /domain name/root1 (root 1 is DFS
root name). Stand alone DFS can be used in workgroup environment which can be accessed through /server name/root1
(root 1 is DFS root name). Both the cases we need to create DFS root ( Which appears like a shared folder for end users)
and DFS links ( A logical link which is pointing to the server where the folder is physically shared)

The maximum number of Dfs roots per server is 1.

The maximum numbers of Dfs root replicas are 31.
The maximum number of Dfs roots per domain is unlimited.
The maximum number of Dfs links or shared folders in a Dfs root is 1,000

What is RIS and what are its requirements

RIS is a remote installation service, which is used to install operation system remotely.

Client requirements
PXE DHCP-based boot ROM version 1.00 or later NIC, or a network adapter that is supported by the RIS boot disk.
Should meet minimum operating system requirements
Software Requirements
Below network services must be active on RIS server or any server in the network
Domain Name System (DNS Service)
Dynamic Host Configuration Protocol (DHCP)
Active directory “Directory” service

How many root replicas can be created in DFS?

31

What is the difference between Domain DFS and Standalone DFS?

Refer question 17.

High Level

Can we establish trust relationship between two forests?

In Windows 2000 it is not possible. In Windows 2003 it is possible

What is FSMO Roles

Flexible single master operation (FSMO) roles are

Domain Naming Master
Schema Master
PDC Emulator
Infrastructure Master
RID Master

Brief all the FSMO Roles

Windows 2000/2003 Multi-Master Model

A multi-master enabled database, such as the Active Directory, provides the flexibility of allowing changes to occur at
any DC in the enterprise, but it also introduces the possibility of conflicts that can potentially lead to problems once the
data is replicated to the rest of the enterprise. One way Windows 2000/2003 deals with conflicting updates is by having
a conflict resolution algorithm handle discrepancies in values by resolving to the DC to which changes were written last
(that is, "the last writer wins"), while discarding the changes in all other DCs. Although this resolution method may be
acceptable in some cases, there are times when conflicts are just too difficult to resolve using the "last writer wins"
approach. In such cases, it is best to prevent the conflict from occurring rather than to try to resolve it after the fact.
For certain types of changes, Windows 2000/2003 incorporates methods to prevent conflicting Active Directory updates
from occurring.
Windows 2000/2003 Single-Master Model
To prevent conflicting updates in Windows 2000/2003, the Active Directory performs updates to certain objects in a
single-master fashion.

In a single-master model, only one DC in the entire directory is allowed to process updates. This is similar to the role
given to a primary domain controller (PDC) in earlier versions of Windows (such as Microsoft Windows NT 4.0), in which
the PDC is responsible for processing all updates in a given domain.

In a forest, there are five FSMO roles that are assigned to one or more domain controllers. The five FSMO roles are:

Schema Master:

The schema master domain controller controls all updates and modifications to the schema. Once the Schema update is
complete, it is replicated from the schema master to all other DCs in the directory. To update the schema of a forest,
you must have access to the schema master. There can be only one schema master in the whole forest.
Domain naming master:

The domain naming master domain controller controls the addition or removal of domains in the forest. This DC is the
only one that can add or remove a domain from the directory. It can also add or remove cross references to domains in
external directories. There can be only one domain naming master in the whole forest.

Infrastructure Master:

When an object in one domain is referenced by another object in another domain, it represents the reference by the
GUID, the SID (for references to security principals), and the DN of the object being referenced. The infrastructure FSMO
role holder is the DC responsible for updating an object's SID and distinguished name in a cross-domain object reference.
At any one time, there can be only one domain controller acting as the infrastructure master in each domain.

Note: The Infrastructure Master (IM) role should be held by a domain controller that is not a Global Catalog server (GC).
If the Infrastructure Master runs on a Global Catalog server it will stop updating object information because it does not
contain any references to objects that it does not hold. This is because a Global Catalog server holds a partial replica of
every object in the forest. As a result, cross-domain object references in that domain will not be updated and a warning
to that effect will be logged on that DC's event log. If all the domain controllers in a domain also host the global catalog,
all the domain controllers have the current data, and it is not important which domain controller holds the
infrastructure master role.

Relative ID (RID) Master:

The RID master is responsible for processing RID pool requests from all domain controllers in a particular domain. When
a DC creates a security principal object such as a user or group, it attaches a unique Security ID (SID) to the object. This
SID consists of a domain SID (the same for all SIDs created in a domain), and a relative ID (RID) that is unique for each
security principal SID created in a domain. Each DC in a domain is allocated a pool of RIDs that it is allowed to assign to
the security principals it creates. When a DC's allocated RID pool falls below a threshold, that DC issues a request for
additional RIDs to the domain's RID master. The domain RID master responds to the request by retrieving RIDs from the
domain's unallocated RID pool and assigns them to the pool of the requesting DC. At any one time, there can be only one
domain controller acting as the RID master in the domain.

PDC Emulator:

The PDC emulator is necessary to synchronize time in an enterprise. Windows 2000/2003 includes the W32Time
(Windows Time) time service that is required by the Kerberos authentication protocol. All Windows 2000/2003-based
computers within an enterprise use a common time. The purpose of the time service is to ensure that the Windows Time
service uses a hierarchical relationship that controls authority and does not permit loops to ensure appropriate common
time usage.

The PDC emulator of a domain is authoritative for the domain. The PDC emulator at the root of the forest becomes
authoritative for the enterprise, and should be configured to gather the time from an external source. All PDC FSMO role
holders follow the hierarchy of domains in the selection of their in-bound time partner.
In a Windows 2000/2003 domain, the PDC emulator role holder retains the following functions:
Password changes performed by other DCs in the domain are replicated preferentially to the PDC emulator.
Authentication failures that occur at a given DC in a domain because of an incorrect password are forwarded to the PDC
emulator before a bad password failure message is reported to the user.

Account lockout is processed on the PDC emulator.

Editing or creation of Group Policy Objects (GPO) is always done from the GPO copy found in the PDC Emulator's SYSVOL
share, unless configured not to do so by the administrator.

The PDC emulator performs all of the functionality that a Microsoft Windows NT 4.0 Server-based PDC or earlier PDC
performs for Windows NT 4.0-based or earlier clients.

This part of the PDC emulator role becomes unnecessary when all workstations, member servers, and domain controllers
that are running Windows NT 4.0 or earlier are all upgraded to Windows 2000/2003. The PDC emulator still performs the
other functions as described in a Windows 2000/2003 environment.

At any one time, there can be only one domain controller acting as the PDC emulator master in each domain in the
forest.

How to manually configure FSMO Roles to separate DC’s

How can I determine who are the current FSMO Roles holders in my domain/forest?

Windows 2000/2003 Active Directory domains utilize a Single Operation Master method called FSMO (Flexible Single
Master Operation), as described in Understanding FSMO Roles in Active Directory.

The five FSMO roles are:

• Schema master - Forest-wide and one per forest.

• Domain naming master - Forest-wide and one per forest.

• RID master - Domain-specific and one for each domain.

• PDC - PDC Emulator is domain-specific and one for each domain.

• Infrastructure master - Domain-specific and one for each domain.

In most cases an administrator can keep the FSMO role holders (all 5 of them) in the same spot (or actually, on the same
DC) as has been configured by the Active Directory installation process. However, there are scenarios where an
administrator would want to move one or more of the FSMO roles from the default holder DC to a different DC. The
transferring method is described in the Transferring FSMO Roles article, while seizing the roles from a non-operational
DC to a different DC is described in the Seizing FSMO Roles article.

In order to better understand your AD infrastructure and to know the added value that each DC might possess, an AD
administrator must have the exact knowledge of which one of the existing DCs is holding a FSMO role, and what role it
holds. With that knowledge in hand, the administrator can make better arrangements in case of a scheduled shut-down
of any given DC, and better prepare him or herself in case of a non-scheduled cease of operation from one of the DCs.

How to find out which DC is holding which FSMO role? Well, one can accomplish this task by many means. This article
will list a few of the available methods.

Method #1: Know the default settings

The FSMO roles were assigned to one or more DCs during the DCPROMO process. The following table summarizes the
FSMO default locations:

FSMO Role Number of DCs holding this role Original DC holding the FSMO role
Schema One per forest The first DC in the first domain in the forest (i.e. the Forest Root Domain)
Domain Naming One per forest
RID One per domain The first DC in a domain (any domain, including the Forest Root Domain, any Tree Root Domain, or
any Child Domain)
PDC Emulator One per domain
Infrastructure One per domain

Method #2: Use the GUI

The FSMO role holders can be easily found by use of some of the AD snap-ins. Use this table to see which tool can be
used for what FSMO role:

FSMO Role Which snap-in should I use?

Schema Schema snap-in
Domain Naming AD Domains and Trusts snap-in
RID AD Users and Computers snap-in
PDC Emulator
Infrastructure

Finding the RID Master, PDC Emulator, and Infrastructure Masters via GUI

To find out who currently holds the Domain-Specific RID Master, PDC Emulator, and Infrastructure Master FSMO Roles:

1. Open the Active Directory Users and Computers snap-in from the Administrative Tools folder.
2. Right-click the Active Directory Users and Computers icon again and press Operation Masters.
3. Select the appropriate tab for the role you wish to view.
4. When you're done click close.

Finding the Domain Naming Master via GUI

To find out who currently holds the Domain Naming Master Role:
1. Open the Active Directory Domains and Trusts snap-in from the Administrative Tools folder.
2. Right-click the Active Directory Domains and Trusts icon again and press Operation Masters.
3. When you're done click close.

Finding the Schema Master via GUI

To find out who currently holds the Schema Master Role:

1. Register the Schmmgmt.dll library by pressing Start > RUN and typing:
2. Press OK. You should receive a success confirmation.
3. From the Run command open an MMC Console by typing MMC.
4. On the Console menu, press Add/Remove Snap-in.
5. Press Add. Select Active Directory Schema.
6. Press Add and press Close. Press OK.
7. Click the Active Directory Schema icon. After it loads right-click it and press Operation Masters.
8. Press the Close button.

Method #3: Use the Ntdsutil command

The FSMO role holders can be easily found by use of the Ntdsutil command.

Caution: Using the Ntdsutil utility incorrectly may result in partial or complete loss of Active Directory functionality.
1. On any domain controller, click Start, click Run, type Ntdsutil in the Open box, and then click OK.
2. Type roles, and then press ENTER.

Note: To see a list of available commands at any of the prompts in the Ntdsutil tool, type ?, and then press ENTER.
3. Type connections, and then press ENTER.
4. Type connect to server , where is the name of the server you want to use, and then press ENTER.
5. At the server connections: prompt, type q, and then press ENTER again.
6. At the FSMO maintenance: prompt, type Select operation target, and then press ENTER again.

At the select operation target: prompt, type List roles for connected server, and then press ENTER again.

select operation target: List roles for connected server

Server "server100" knows about 5 roles

Schema - CN=NTDS Settings,CN=SERVER100,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=C

onfiguration,DC=dpetri,DC=net
Domain - CN=NTDS Settings,CN=SERVER100,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=C

onfiguration,DC=dpetri,DC=net

PDC - CN=NTDS Settings,CN=SERVER100,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Conf

iguration,DC=dpetri,DC=net

RID - CN=NTDS Settings,CN=SERVER100,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Conf

iguration,DC=dpetri,DC=net

Infrastructure - CN=NTDS Settings,CN=SERVER100,CN=Servers,CN=Default-First-Site-Name,CN=Si

tes,CN=Configuration,DC=dpetri,DC=net

select operation target:

8. Type q 3 times to exit the Ntdsutil prompt.

Note: You can download THIS nice batch file that will do all this for you (1kb).

Another Note: Microsoft has a nice tool called Dumpfsmos.cmd, found in the Windows 2000 Resource Kit (and can be
downloaded here: Download Free Windows 2000 Resource Kit Tools). This tool is basically a one-click Ntdsutil script that
performs the same operation described above.

Method #4: Use the Netdom command

The FSMO role holders can be easily found by use of the Netdom command.

Netdom.exe is a part of the Windows 2000/XP/2003 Support Tools. You must either download it separately (from here
Download Free Windows 2000 Resource Kit Tools) or by obtaining the correct Support Tools pack for your operating
system. The Support Tools pack can be found in the \Support\Tools folder on your installation CD (or you can Download
Windows 2000 SP4 Support Tools, Download Windows XP SP1 Deploy Tools).

1. On any domain controller, click Start, click Run, type CMD in the Open box, and then click OK.
2. In the Command Prompt window, type netdom query /domain:fsmo (where is the name of YOUR domain).

Close the CMD window.

Note: You can download THIS nice batch file that will do all this for you (1kb).

Method #5: Use the Replmon tool

The FSMO role holders can be easily found by use of the Netdom command.

Just like Netdom, Replmon.exe is a part of the Windows 2000/XP/2003 Support Tools. Replmon can be used for a wide
verity of tasks, mostly with those that are related with AD replication. But Replmon can also provide valuable
information about the AD, about any DC, and also about other objects and settings, such as GPOs and FSMO roles. Install
the package before attempting to use the tool.

1. On any domain controller, click Start, click Run, type REPLMON in the Open box, and then click OK.
2. Right-click Monitored servers and select Add Monitored Server.
3. In the Add Server to Monitor window, select the Search the Directory for the server to add. Make sure your AD domain
name is listed in the drop-down list.
4. In the site list select your site, expand it, and click to select the server you want to query. Click Finish.
5. Right-click the server that is now listed in the left-pane, and select Properties.
6. Click on the FSMO Roles tab and read the results.
7. Click Ok when you're done.

How can I forcibly transfer (seize) some or all of the FSMO Roles from one DC to another?

Windows 2000/2003 Active Directory domains utilize a Single Operation Master method called FSMO (Flexible Single
Master Operation), as described in Understanding FSMO Roles in Active Directory.

The five FSMO roles are:

• Schema master - Forest-wide and one per forest.

• Domain naming master - Forest-wide and one per forest.
• RID master - Domain-specific and one for each domain.
• PDC - PDC Emulator is domain-specific and one for each domain.
• Infrastructure master - Domain-specific and one for each domain.

In most cases an administrator can keep the FSMO role holders (all 5 of them) in the same spot (or actually, on the same
DC) as has been configured by the Active Directory installation process. However, there are scenarios where an
administrator would want to move one or more of the FSMO roles from the default holder DC to a different DC.

Moving the FSMO roles while both the original FSMO role holder and the future FSMO role holder are online and
operational is called Transferring, and is described in the Transferring FSMO Roles article.

However, when the original FSMO role holder went offline or became non operational for a long period of time, the
administrator might consider moving the FSMO role from the original, non-operational holder, to a different DC. The
process of moving the FSMO role from a non-operational role holder to a different DC is called Seizing, and is described
in this article.

If a DC holding a FSMO role fails, the best thing to do is to try and get the server online again. Since none of the FSMO
roles are immediately critical (well, almost none, the loss of the PDC Emulator FSMO role might become a problem
unless you fix it in a reasonable amount of time), so it is not a problem to them to be unavailable for hours or even
days.

If a DC becomes unreliable, try to get it back on line, and transfer the FSMO roles to a reliable computer. Administrators
should use extreme caution in seizing FSMO roles. This operation, in most cases, should be performed only if the original
FSMO role owner will not be brought back into the environment. Only seize a FSMO role if absolutely necessary when the
original role holder is not connected to the network.

What will happen if you do not perform the seize in time? This table has the info:

FSMO Role Loss implications

Schema The schema cannot be extended. However, in the short term no one will notice a missing Schema Master unless
you plan a schema upgrade during that time.

Domain Naming Unless you are going to run DCPROMO, then you will not miss this FSMO role.

RID Chances are good that the existing DCs will have enough unused RIDs to last some time, unless you're building
hundreds of users or computer object per week.
PDC Emulator Will be missed soon. NT 4.0 BDCs will not be able to replicate, there will be no time synchronization in
the domain, you will probably not be able to change or troubleshoot group policies and password changes will become a
problem.

Infrastructure Group memberships may be incomplete. If you only have one domain, then there will be no impact.

Important: If the RID, Schema, or Domain Naming FSMOs are seized, then the original domain controller must not be
activated in the forest again. It is necessary to reinstall Windows if these servers are to be used again.

The following table summarizes the FSMO seizing restrictions:

FSMO Role Restrictions
Schema Original must be reinstalled
Domain Naming
RID
PDC Emulator Can transfer back to original
Infrastructure

Another consideration before performing the seize operation is the administrator's group membership, as this table lists:
FSMO Role Administrator must be a member of
Schema Schema Admins
Domain Naming Enterprise Admins
RID Domain Admins
PDC Emulator
Infrastructure

To seize the FSMO roles by using Ntdsutil, follow these steps:

Caution: Using the Ntdsutil utility incorrectly may result in partial or complete loss of Active Directory functionality.

1. On any domain controller, click Start, click Run, type Ntdsutil in the Open box, and then click OK.
2. Type roles, and then press ENTER.

Note: To see a list of available commands at any of the prompts in the Ntdsutil tool, type ?, and then press ENTER.

3. Type connections, and then press ENTER.

4. Type connect to server , where is the name of the server you want to use, and then press ENTER.
5. At the server connections: prompt, type q, and then press ENTER again.
6. Type seize , where is the role you want to seize. For example, to seize the RID Master role, you would type seize rid
master:

Options are:

7. You will receive a warning window asking if you want to perform the seize. Click on Yes.
fsmo maintenance: Seize infrastructure master
Attempting safe transfer of infrastructure FSMO before seizure.
ldap_modify_sW error 0x34(52 (Unavailable).
Ldap extended error message is 000020AF: SvcErr: DSID-03210300, problem 5002 (UNAVAILABLE)
data 1722
Win32 error returned is 0x20af(The requested FSMO operation failed. The current FSMO holde

r could not be contacted.)

)

Depending on the error code this may indicate a connection,

ldap, or role transfer error.
Transfer of infrastructure FSMO failed, proceeding with seizure ...
Server "server100" knows about 5 roles
Schema - CN=NTDS Settings,CN=SERVER200,CN=Servers,CN=Default-First-Site-
Name,CN=Sites,CN=Configuration,DC=dpetri,DC=netDomain - CN=NTDS Settings,CN=SERVER100,CN=Servers,CN=Default-
First-Site-Name,CN=Sites,CN=Configuration,DC=dpetri,DC=net
PDC - CN=NTDS Settings,CN=SERVER100,CN=Servers,CN=Default-First-Site-
Name,CN=Sites,CN=Configuration,DC=dpetri,DC=net
RID - CN=NTDS Settings,CN=SERVER200,CN=Servers,CN=Default-First-Site-
Name,CN=Sites,CN=Configuration,DC=dpetri,DC=net
Infrastructure - CN=NTDS Settings,CN=SERVER100,CN=Servers,CN=Default-First-Site-
Name,CN=Sites,CN=Configuration,DC=dpetri,DC=net

fsmo maintenance:

Note: All five roles need to be in the forest. If the first domain controller is out of the forest then seize all roles.
Determine which roles are to be on which remaining domain controllers so that all five roles are not on only one server.

8. Repeat steps 6 and 7 until you've seized all the required FSMO roles.
9. After you seize or transfer the roles, type q, and then press ENTER until you quit the Ntdsutil tool.

Note: Do not put the Infrastructure Master (IM) role on the same domain controller as the Global Catalog server. If the
Infrastructure Master runs on a GC server it will stop updating object information because it does not contain any
references to objects that it does not hold. This is because a GC server holds a partial replica of every object in the
forest.

What is the difference between authoritative and non-authoritative restore

In authoritative restore, Objects that are restored will be replicated to all domain controllers in the domain. This can be
used specifically when the entire OU is disturbed in all domain controllers or specifically restore a single object, which
is disturbed in all DC’s

In non-authoritative restore, Restored directory information will be updated by other domain controllers based on the
latest modification time.

What is Active Directory De-fragmentation?

De-fragmentation of AD means separating used space and empty space created by deleted objects and reduces directory
size (only in offline De-fragmentation)

Difference between online and offline de-fragmentation

The size of NTDS.DIT will often be different sizes across the domain controllers in a domain. Remember that Active
Directory is a multi-master independent model where updates are occurring in each of the domain controllers with the
changes being replicated over time to the other domain controllers.

The changed data is replicated between domain controllers, not the database, so there is no guarantee that the files are
going to be the same size across all domain controllers.

Windows 2000 and Windows Server 2003 servers running Directory Services (DS) perform a directory online
defragmentation every 12 hours by default as part of the garbage-collection process. This defragmentation only moves
data around the database file (NTDS.DIT) and doesn’t reduce the file’s size - the database file cannot be compacted
while Active Directory is mounted.

Active Directory routinely performs online database defragmentation, but this is limited to the disposal of tombstoned
objects. The database file cannot be compacted while Active Directory is mounted (or online).

An NTDS.DIT file that has been defragmented offline (compacted), can be much smaller than the NTDS.DIT file on its
peers.

However, defragmenting the NTDS.DIT file isn’t something you should really need to do. Normally, the database self-
tunes and automatically tombstoning the records then sweeping them away when the tombstone lifetime has passed to
make that space available for additional records.

Defragging the NTDS.DIT file probably won’t help your AD queries go any faster in the long run.

So why defrag it in the first place?

One reason you might want to defrag your NTDS.DIT file is to save space, for example if you deleted a large number of
records at one time.
To create a new, smaller NTDS.DIT file and to enable offline defragmentation, perform the following steps:
Back up Active Directory (AD).
Reboot the server, select the OS option, and press F8 for advanced options.
Select the Directory Services Restore Mode option, and press Enter. Press
Enter again to start the OS.
W2K will start in safe mode, with no DS running.
Use the local SAM’s administrator account and password to log on.
You’ll see a dialog box that says you’re in safe mode. Click OK.
From the Start menu, select Run and type cmd.exe
In the command window, you’ll see the following text. (Enter the commands in bold.)
C:\> ntdsutil
ntdsutil: files
file maintenance:info

....
file maintenance:compact to c:\temp

You’ll see the defragmentation process. If the process was successful, enter quit to return to the command prompt.

Then, replace the old NTDS.DIT file with the new, compressed version. (Enter the commands in bold.)

C:\> copy c:\temp\ntds.dit %systemroot%\ntds\ntds.dit

Restart the computer, and boot as normal.

What is tombstone period

Tombstones are nothing but objects marked for deletion. After deleting an object in AD the objects will not be deleted
permanently. It will be remain 60 days by default (which can be configurable) it adds an entry as marked for deletion on
the object and replicates to all DC’s. After 60 days object will be deleted permanently from all Dc’s.

What is white space and Garbage Collection?

refer question 7

What are the monitoring tools used for Server and Network Heath. How to define alert mechanism
Spot Light , SNMP Need to enable .

How to deploy the patches and what are the softwares used for this process
Using SUS (Software update services) server we can deploy patches to all clients in the network. We need to configure
an option called “Synchronize with Microsoft software update server” option and schedule time to synchronize in server.
We need to approve new update based on the requirement. Then approved update will be deployed to clients
We can configure clients by changing the registry manually or through Group policy by adding WUAU administrative
template in group policy

What is Clustering. Briefly define & explain it

Clustering is a technology, which is used to provide High Availability for mission critical applications. We can configure
cluster by installing MCS (Microsoft cluster service) component from Add remove programs, which can only available in
Enterprise Edition and Data center edition.
In Windows we can configure two types of clusters
NLB (network load balancing) cluster for balancing load between servers. This cluster will not provide any high
availability. Usually preferable at edge servers like web or proxy.

Server Cluster: This provides High availability by configuring active-active or active-passive cluster. In 2 node active-
passive cluster one node will be active and one node will be stand by. When active server fails the application will
FAILOVER to stand by server automatically. When the original server backs we need to FAILBACK the application

Quorum: A shared storage need to provide for all servers which keeps information about clustered application and
session state and is useful in FAILOVER situation. This is very important if Quorum disk fails entire cluster will fails

Heartbeat: Heartbeat is a private connectivity between the servers in the cluster, which is used to identify the status of
other servers in cluster.

How to configure SNMP

SNMP can be configured by installing SNMP from Monitoring and Management tools from Add and Remove programs.
For SNMP programs to communicate we need to configure common community name for those machines where SNMP
programs (eg DELL OPEN MANAGER) running. This can be configured from services.msc--- SNMP service -- Security

Is it possible to rename the Domain name & how?

In Windows 2000 it is not possible. In windows 2003 it is possible. On Domain controller by going to MYCOMPUTER
properties we can change.

What is SOA Record

SOA is a Start Of Authority record, which is a first record in DNS, which controls the startup behavior of DNS. We can
configure TTL, refresh, and retry intervals in this record.

What is a Stub zone and what is the use of it.

Stub zones are a new feature of DNS in Windows Server 2003 that can be used to streamline name resolution, especially
in a split namespace scenario. They also help reduce the amount of DNS traffic on your network, making DNS more
efficient especially over slow WAN links.

What are the different types of partitions present in AD?

Active directory is divided into three partitions
Configuration Partition—replicates entire forest
Schema Partition—replicates entire forest
Domain Partition—replicate only in domain
Application Partition (Only in Windows 2003)
What are the (two) services required for replication
File Replication Service (FRS)
Knowledge Consistency Checker (KCC)
Can we use a Linux DNS Sever in 2000 Domain?
We can use, But the BIND version should be 8 or greater

What is the difference between IIS Version 5 and IIS Version 6?

Refer Question 1

What is ASR (Automated System Recovery) and how to implement it

ASR is a two-part system; it includes ASR backup and ASR restore. The ASR Wizard, located in Backup, does the backup
portion. The wizard backs up the system state, system services, and all the disks that are associated with the operating
system components. ASR also creates a file that contains information about the backup, the disk configurations
(including basic and dynamic volumes), and how to perform a restore.

You can access the restore portion by pressing F2 when prompted in the text-mode portion of setup. ASR reads the disk
configurations from the file that it creates. It restores all the disk signatures, volumes, and partitions on (at a minimum)
the disks that you need to start the computer. ASR will try to restore all the disk configurations, but under some
circumstances it might not be able to. ASR then installs a simple installation of Windows and automatically starts a
restoration using the backup created by the ASR Wizard.

What are the different levels that we can apply Group Policy
We can apply group policy at SITE level---Domain Level---OU level

What is Domain Policy, Domain controller policy, Local policy and Group policy
Domain Policy will apply to all computers in the domain, because by default it will be associated with domain GPO,
Where as Domain controller policy will be applied only on domain controller. By default domain controller security
policy will be associated with domain controller GPO. Local policy will be applied to that particular machine only and
effects to that computer only.

What is the use of SYSVOL FOLDER?

Policies and scripts saved in SYSVOL folder will be replicated to all domain controllers in the domain. FRS (File
replication service) is responsible for replicating all policies and scripts

What is folder redirection?

Folder Redirection is a User group policy. Once you create the group policy and link it to the appropriate folder object,
an administrator can designate which folders to redirect and where To do this, the administrator needs to navigate to
the following location in the Group Policy Object:

User Configuration\Windows Settings\Folder Redirection

In the Properties of the folder, you can choose Basic or Advanced folder redirection, and you can designate the server
file system path to which the folder should be redirected.

The %USERNAME% variable may be used as part of the redirection path, thus allowing the system to dynamically create a
newly redirected folder for each user to whom the policy object applies.

What different modes in windows 2003 (Mixed, native & intrim….etc)

What are the domain and forest function levels in a Windows Server 2003-basedActive Directory?

Functional levels are an extension of the mixed/native mode concept introduced in Windows 2000 to activate new
Active Directory features after all the domain controllers in the domain or forest are running the Windows Server 2003
operating system.

When a computer that is running Windows Server 2003 is installed and promoted to a domain controller, new Active
Directory features are activated by the Windows Server 2003 operating system over its Windows 2000 counterparts.
Additional Active Directory features are available when all domain controllers in a domain or forest are running Windows
Server 2003 and the administrator activates the corresponding functional level in the domain or forest.

To activate the new domain features, all domain controllers in the domain must be running Windows Server 2003. After
this requirement is met, the administrator can raise the domain functional level to Windows Server 2003 (read Raise
Domain Function Level in Windows Server 2003 Domains for more info).

To activate new forest-wide features, all domain controllers in the forest must be running Windows Server 2003, and the
current forest functional level must be at Windows 2000 native or Windows Server 2003 domain level. After this
requirement is met, the administrator can raise the domain functional level (read Raise Forest Function Level in
Windows Server 2003 Active Directory for more info).

Note: Network clients can authenticate or access resources in the domain or forest without being affected by the
Windows Server 2003 domain or forest functional levels. These levels only affect the way that domain controllers
interact with each other.

Important

Raising the domain and forest functional levels to Windows Server 2003 is a nonreversible task and prohibits the addition
of Windows NT 4.0–based or Windows 2000–based domain controllers to the environment. Any existing Windows NT 4.0
or Windows 2000–based domain controllers in the environment will no longer function. Before raising functional levels to
take advantage of advanced Windows Server 2003 features, ensure that you will never need to install domain controllers
running Windows NT 4.0 or Windows 2000 in your environment.

When the first Windows Server 2003–based domain controller is deployed in a domain or forest, a set of default Active
Directory features becomes available. The following table summarizes the Active Directory features that are available
by default on any domain controller running Windows Server 2003:

Feature Functionality

Multiple selection of user objects Allows you to modify common attributes of multiple user objects at one time.
Drag and drop functionality Allows you to move Active Directory objects from container to container by dragging one or
more objects to a location in the domain hierarchy. You can also add objects to group membership lists by dragging one
or more objects (including other group objects) to the target group.
Efficient search capabilities Search functionality is object-oriented and provides an efficient search that minimizes
network traffic associated with browsing objects.
Saved queries Allows you to save commonly used search parameters for reuse in Active Directory Users and Computers
Active Directory command-line tools Allows you to run new directory service commands for administration scenarios.
InetOrgPerson class The inetOrgPerson class has been added to the base schema as a security principal and can be used
in the same manner as the user class.
Application directory partitions Allows you to configure the replication scope for application-specific data among domain
controllers. For example, you can control the replication scope of Domain Name System (DNS) zone data stored in Active
Directory so that only specific domain controllers in the forest participate in DNS zone replication.
Ability to add additional domain controllers by using backup media Reduces the time it takes to add an additional
domain controller in an existing domain by using backup media.
Universal group membership caching Prevents the need to locate a global catalog across a wide area network (WAN)
when logging on by storing universal group membership information on an authenticating domain controller.
Secure Lightweight Directory Access Protocol (LDAP) traffic Active Directory administrative tools sign and encrypt all
LDAP traffic by default. Signing LDAP traffic guarantees that the packaged data comes from a known source and that it
has not been tampered with.
Partial synchronization of the global catalog Provides improved replication of the global catalog when schema changes
add attributes to the global catalog partial attribute set. Only the new attributes are replicated, not the entire global
catalog.
Active Directory quotas Quotas can be specified in Active Directory to control the number of objects a user, group, or
computer can own in a given directory partition. Members of the Domain Administrators and Enterprise Administrators
groups are exempt from quotas.

When the first Windows Server 2003–based domain controller is deployed in a domain or forest, the domain or forest
operates by default at the lowest functional level that is possible in that environment. This allows you to take advantage
of the default Active Directory features while running versions of Windows earlier than Windows Server 2003.

When you raise the functional level of a domain or forest, a set of advanced features becomes available. For example,
the Windows Server 2003 interim forest functional level supports more features than the Windows 2000 forest functional
level, but fewer features than the Windows Server 2003 forest functional level supports. Windows Server 2003 is the
highest functional level that is available for a domain or forest. The Windows Server 2003 functional level supports the
most advanced Active Directory features; however, only Windows Server 2003 domain controllers can operate in that
domain or forest.
If you raise the domain functional level to Windows Server 2003, you cannot introduce any domain controllers that are
running versions of Windows earlier than Windows Server 2003 into that domain. This applies to the forest functional
level as well.

Domain Functional Level

Domain functionality activates features that affect the whole domain and that domain only. The four domain functional
levels, their corresponding features, and supported domain controllers are as follows:

Windows 2000 mixed (Default)

• Supported domain controllers: Microsoft Windows NT 4.0, Windows 2000, Windows Server 2003
• Activated features: local and global groups, global catalog support

Windows 2000 native

• Supported domain controllers: Windows 2000, Windows Server 2003
• Activated features: group nesting, universal groups, SidHistory, converting groups between security groups and
distribution groups, you can raise domain levels by increasing the forest level settings

Windows Server 2003 interim

• Supported domain controllers: Windows NT 4.0, Windows Server 2003
• Supported features: There are no domain-wide features activated at this level. All domains in a forest are
automatically raised to this level when the forest level increases to interim. This mode is only used when you upgrade
domain controllers in Windows NT 4.0 domains to Windows Server 2003 domain controllers.

Windows Server 2003

• Supported domain controllers: Windows Server 2003
• Supported features: domain controller rename, logon timestamp attribute updated and replicated. User password
support on the InetOrgPerson objectClass. Constrained delegation, you can redirect the Users and Computers
containers.

Domains that are upgraded from Windows NT 4.0 or created by the promotion of a Windows Server 2003-based computer
operate at the Windows 2000 mixed functional level. Windows 2000 domains maintain their current domain functional
level when Windows 2000 domain controllers are upgraded to the Windows Server 2003 operating system. You can raise
the domain functional level to either Windows 2000 native or Windows Server 2003.

After the domain functional level is raised, domain controllers that are running earlier operating systems cannot be
introduced into the domain. For example, if you raise the domain functional level to Windows Server 2003, domain
controllers that are running Windows 2000 Server cannot be added to that domain.

The following describes the domain functional level and the domain-wide features that are activated for that level. Note
that with each successive level increase, the feature set of the previous level is included.
Forest Functional Level

Forest functionality activates features across all the domains in your forest. Three forest functional levels, the
corresponding features, and their supported domain controllers are listed below.

Windows 2000 (default)

• Supported domain controllers: Windows NT 4.0, Windows 2000, Windows Server 2003

• New features: Partial list includes universal group caching, application partitions, install from media, quotas, rapid
global catalog demotion, Single Instance Store (SIS) for System Access Control Lists (SACL) in the Jet Database Engine,
Improved topology generation event logging. No global catalog full sync when attributes are added to the PAS Windows
Server 2003 domain controller assumes the Intersite Topology Generator (ISTG) role.

Windows Server 2003 interim

• Supported domain controllers: Windows NT 4.0, Windows Server 2003. See the "Upgrade from a Windows NT 4.0
Domain" section of this article.

• Activated features: Windows 2000 features plus Efficient Group Member Replication using Linked Value Replication,
Improved Replication Topology Generation. ISTG Aliveness no longer replicated. Attributes added to the global catalog.
ms-DS-Trust-Forest-Trust-Info. Trust-Direction, Trust-Attributes, Trust-Type, Trust-Partner, Security-Identifier, ms-DS-
Entry-Time-To-Die, Message Queuing-Secured-Source, Message Queuing-Multicast-Address, Print-Memory, Print-Rate,
Print-Rate-Unit

Windows Server 2003

• Supported domain controllers: Windows Server 2003
• Activated features: all features in Interim Level, Defunct schema objects, Cross Forest Trust, Domain Rename,
Dynamic auxiliary classes, InetOrgPerson objectClass change, Application Groups, 15-second intrasite replication
frequency for Windows Server 2003 domain controllers upgraded from Windows 2000

After the forest functional level is raised, domain controllers that are running earlier operating systems cannot be
introduced into the forest. For example, if you raise forest functional levels to Windows Server 2003, domain controllers
that are running Windows NT 4.0 or Windows 2000 Server cannot be added to the forest.

Different Active Directory features are available at different functional levels. Raising domain and forest functional
levels is required to enable certain new features as domain controllers are upgraded from Windows NT 4.0 and Windows
2000 to Windows Server 2003

Domain Functional Levels: Windows 2000 Mixed mode, Windows 2000 Native mode, Windows server 2003 and Windows
server 2003 interim ( Only available when upgrades directly from Windows NT 4.0 to Windows 2003)

Forest Functional Levels: Windows 2000 and Windows 2003

Ipsec usage and difference window 2000 & 2003.

Microsoft doesn’t recommend Internet Protocol security (IPSec) network address translation (NAT) traversal (NAT-T) for
Windows deployments that include VPN servers and that are located behind network address translators. When a server
is behind a network address translator, and the server uses IPSec NAT-T, unintended side effects may occur because of
the way that network address translators translate network traffic

If you put a server behind a network address translator, you may experience connection problems because clients that
connect to the server over the Internet require a public IP address. To reach servers that are located behind network
address translators from the Internet, static mappings must be configured on the network address translator. For
example, to reach a Windows Server 2003-based computer that is behind a network address translator from the Internet,
configure the network address translator with the following static network address translator mappings:

• Public IP address/UDP port 500 to the server's private IP address/UDP port 500.

• Public IP address/UDP port 4500 to the server's private IP address/UDP port 4500.

These mappings are required so that all Internet Key Exchange (IKE) and IPSec NAT-T traffic that is sent to the public
address of the network address translator is automatically translated and forwarded to the Windows Server 2003-based
computer

How to create application partition windows 2003 and its usage?

An application directory partition is a directory partition that is replicated only to specific domain controllers. A domain
controller that participates in the replication of a particular application directory partition hosts a replica of that
partition. Only domain controllers running Windows Server 2003 can host a replica of an application directory partition.

Applications and services can use application directory partitions to store application-specific data. Application
directory partitions can contain any type of object, except security principals. TAPI is an example of a service that
stores its application-specific data in an application directory partition.

Application directory partitions are usually created by the applications that will use them to store and replicate data.
For testing and troubleshooting purposes, members of the Enterprise Admins group can manually create or manage
application directory partitions using the Ntdsutil command-line tool.

Is it possible to do implicit transitive forest to forest trust relationship in windows 2003?

Implicit Transitive trust will not be possible in windows 2003. Between forests we can create explicit trust

Two-way trust

One-way: incoming

One-way: Outgoing

What is universal group membership cache in windows 2003?

Information is stored locally once this option is enabled and a user attempts to log on for the first time. The domain
controller obtains the universal group membership for that user from a global catalog. Once the universal group
membership information is obtained, it is cached on the domain controller for that site indefinitely and is periodically
refreshed. The next time that user attempts to log on, the authenticating domain controller running Windows Server
2003 will obtain the universal group membership information from its local cache without the need to contact a global
catalog.

By default, the universal group membership information contained in the cache of each domain controller will be
refreshed every 8 hours.

GPMC & RSOP in windows 2003?

GPMC is tool which will be used for managing group policies and will display information like how many policies applied,
on which OU’s the policies applied, What are the settings enabled in each policy, Who are the users effecting by these
polices, who is managing these policies. GPMC will display all the above information.
RSoP provides details about all policy settings that are configured by an Administrator, including Administrative
Templates, Folder Redirection, Internet Explorer Maintenance, Security Settings, Scripts, and Group Policy Software
Installation.

When policies are applied on multiple levels (for example, site, domain, domain controller, and organizational unit), the
results can conflict. RSoP can help you determine a set of applied policies and their precedence (the order in which
policies are applied).

Assign & Publish the applications in GP & how?

Through Group policy you can Assign and Publish the applications by creating .msi package for that application
With Assign option you can apply policy for both user and computer. If it is applied to computer then the policy will
apply to user who logs on to that computer. If it is applied on user it will apply where ever he logs on to the domain. It
will be appear in Start menu—Programs. Once user click the shortcut or open any document having that extension then
the application install into the local machine. If any application program files missing it will automatically repair.

With Publish option you can apply only on users. It will not install automatically when any application program files are
corrupted or deleted.

DFS in windows 2003?

Refer Question 17 on level 2

How to use recovery console?

The Windows 2000 Recovery Console is a command-line console that you can start from the Windows 2000 Setup
program. Using the Recovery Console, you can start and stop services, format drives, read and write data on a local
drive (including drives formatted to use NTFS), and perform many other administrative tasks. The Recovery Console is
particularly useful if you need to repair your system by copying a file from a floppy disk or CD-ROM to your hard drive,
or if you need to reconfigure a service that is preventing your computer from starting properly. Because the Recovery
Console is quite powerful, it should only be used by advanced users who have a thorough knowledge of Windows 2000. In
addition, you must be an administrator to use the Recovery Console.
There are two ways to start the Recovery Console:

If you are unable to start your computer, you can run the Recovery Console from your Windows 2000 Setup disks or from
the Windows 2000 Professional CD (if you can start your computer from your CD-ROM drive).
As an alternative, you can install the Recovery Console on your computer to make it available in case you are unable to
restart Windows 2000. You can then select the Recovery Console option from the list of available operating systems

PPTP protocol for VPN in windows 2003?

Point-to-Point-Tunneling Protocol (PPTP) is a networking technology that supports multiprotocol virtual private networks
(VPN), enableing remote users to access corporate networks securely across the Microsoft Windows NT® Workstation,
Windows® 95, and Windows 98 operating systems and other point-to-point protocol (PPP)-enabled systems to dial into a
local Internet service provider to connect securely to their corporate network through the Internet

Netdom.exe is domain management tool to rename domain controller