LM1558/LM1458

February 1995

LM1558/LM1458 Dual Operational Amplifier

General Description Features
The LM1558 and the LM1458 are general purpose dual op- Y No frequency compensation required
erational amplifiers. The two amplifiers share a common Y Short-circuit protection
bias network and power supply leads. Otherwise, their oper- Y Wide common-mode and differential voltage ranges
ation is completely independent. Y Low-power consumption
The LM1458 is identical to the LM1558 except that the Y 8-lead can and 8-lead mini DIP
LM1458 has its specifications guaranteed over the tempera- Y No latch up when input common mode range is
ture range from 0§ C to a 70§ C instead of b55§ C to exceeded
a 125§ C.

Schematic and Connection Diagrams

TL/H/7886 – 1
Note: Numbers in parentheses are pin numbers for amplifier B.

Metal Can Package Dual-In-Line Package

TL/H/7886–2
Top View
Order Number LM1558H,
LM1558H/883 or LM1458H TL/H/7886 – 3
See NS Package Number H08C Top View
Order Number LM1558J, LM1558J/883, LM1458J, LM1458M or LM1458N
See NS Package Number J08A, M08A or N08E

C1995 National Semiconductor Corporation TL/H/7886 RRD-B30M115/Printed in U. S. A.

Absolute Maximum Ratings
If Military/Aerospace specified devices are required, Operating Temperature Range
please contact the National Semiconductor Sales LM1558 b 55§ C to a 125§ C
Office/Distributors for availability and specifications. LM1458 0§ C to a 70§ C
(Note 4) Storage Temperature Range b 65§ C to a 150§ C
Supply Voltage Lead Temperature (Soldering, 10 sec.) 260§ C
LM1558 g 22V
Soldering Information
LM1458 g 18V
Dual-In-Line Package
Power Dissipation (Note 1) Soldering (10 seconds) 260§ C
LM1558H/LM1458H 500 mW Small Outline Package
LM1458N 400 mW Vapor Phase (60 seconds) 215§ C
Differential Input Voltage g 30V Infrared (15 seconds) 220§ C
Input Voltage (Note 2) g 15V See AN-450 ‘‘Surface Mounting Methods and Their Effect
Output Short-Circuit Duration Continuous on Product Reliability’’ for other methods of soldering sur-
face mount devices.
ESD tolerance (Note 5) 300V

Electrical Characteristics (Note 3)

LM1558 LM1458
Parameter Conditions Units
Min Typ Max Min Typ Max
Input Offset Voltage TA e 25§ C, RS s 10 kX 1.0 5.0 1.0 6.0 mV
Input Offset Current TA e 25§ C 80 200 80 200 nA
Input Bias Current TA e 25§ C 200 500 200 500 nA
Input Resistance TA e 25§ C 0.3 1.0 0.3 1.0 MX
Supply Current Both TA e 25§ C, VS e g 15V
3.0 5.0 3.0 5.6 mA
Amplifiers
Large Signal Voltage Gain TA e 25§ C, VS e g 15V
50 160 20 160 V/mV
VOUT e g 10V, RL t 2 kX
Input Offset Voltage RS s 10 kX 6.0 7.5 mV
Input Offset Current 500 300 nA
Input Bias Current 1.5 0.8 mA
Large Signal Voltage Gain VS e g 15V, VOUT e g 10V
25 15 V/mV
RL t kX
Output Voltage Swing VS e g 15V, RL e 10 kX g 12 g 14 g 12 g 14 V
RL e 2 kX g 10 g 13 g 10 g 13 V
Input Voltage Range VS e g 15V g 12 g 12 V
Common Mode RS s 10 kX
70 90 70 90 dB
Rejection Ratio
Supply Voltage RS s 10 kX
77 96 77 96 dB
Rejection Ratio
Note 1: The maximum junction temperature of the LM1558 is 150§ C, while that of the LM1458 is 100§ C. For operating at elevated temperatures, devices in the H08
package must be derated based on a thermal resistance of 150§ C/W, junction to ambient or 20§ C/W, junction to case. For the DIP the device must be derated
based on a thermal resistance of 187§ C/W, junction to ambient.
Note 2: For supply voltages less than g 15V, the absolute maximum input voltage is equal to the supply voltage.
Note 3: These specifications apply for VS e g 15V and b 55§ C s TA s 125§ C, unless otherwise specified. With the LM1458, however, all specifications are limited
to 0§ C s TA s 70§ C and VS e g 15V.
Note 4: Refer to RETS 1558V for LM1558J and LM1558H military specifications.
Note 5: Human body model, 1.5 kX in series with 100 pF.

2
Physical Dimensions inches (millimeters)

Metal Can Package (H)

Order Number LM1558H, LM1558H/883 or LM1458H
NS Package Number H08C

Ceramic Dual-In-Line Package (J)

Order Number LM1558J, LM1558J/883 or LM1458J
NS Package Number J08A

3
LM1558/LM1458
Physical Dimensions inches (millimeters) (Continued)

Small Outline Package (M)

Order Number LM1458M
NS Package Number M08A

Molded Dual-In-Line Package (N)

Order Number LM1458N
NS Package Number N08E

LIFE SUPPORT POLICY

NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF NATIONAL
SEMICONDUCTOR CORPORATION. As used herein:

1. Life support devices or systems are devices or 2. A critical component is any component of a life
systems which, (a) are intended for surgical implant support device or system whose failure to perform can
into the body, or (b) support or sustain life, and whose be reasonably expected to cause the failure of the life
failure to perform, when properly used in accordance support device or system, or to affect its safety or
with instructions for use provided in the labeling, can effectiveness.
be reasonably expected to result in a significant injury
to the user.

National Semiconductor National Semiconductor National Semiconductor National Semiconductor

Corporation Europe Hong Kong Ltd. Japan Ltd.
1111 West Bardin Road Fax: (a49) 0-180-530 85 86 13th Floor, Straight Block, Tel: 81-043-299-2309
Arlington, TX 76017 Email: cnjwge @ tevm2.nsc.com Ocean Centre, 5 Canton Rd. Fax: 81-043-299-2408
Tel: 1(800) 272-9959 Deutsch Tel: (a49) 0-180-530 85 85 Tsimshatsui, Kowloon
Fax: 1(800) 737-7018 English Tel: (a49) 0-180-532 78 32 Hong Kong
Fran3ais Tel: (a49) 0-180-532 93 58 Tel: (852) 2737-1600
Italiano Tel: (a49) 0-180-534 16 80 Fax: (852) 2736-9960

National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.
This datasheet has been download from:

www.datasheetcatalog.com

Datasheets for electronics components.