Scribd
Upload
210 views1 page

7.5w Audio Amplifier

This circuit diagram shows a 7.5W audio amplifier using an LM383 audio power amplifier IC. The amplifier can be used as a simple booster, in a more complex amplifier system, or as a guitar amplifier. The LM383 must be installed on a heat sink and capacitor C3 is needed for filtering to prevent oscillation. The circuit draws around 850mA of current at 12V.

Uploaded by

Sowjanya Daliparthi
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
210 views1 page

7.5w Audio Amplifier

This circuit diagram shows a 7.5W audio amplifier using an LM383 audio power amplifier IC. The amplifier can be used as a simple booster, in a more complex amplifier system, or as a guitar amplifier. The LM383 must be installed on a heat sink and capacitor C3 is needed for filtering to prevent oscillation. The circuit draws around 850mA of current at 12V.

Uploaded by

Sowjanya Daliparthi
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

7.

5W AUDIO AMPLIFIER
EM +12VDC
N. SHARMA + C3
TESTED C1 0.1µF
Sumit Das
10µF
Here is a circuit diagram for a LM383 + 1 5
7.5W audio amplifier. This +
amplifier can be used as a 1 2 3 4 5 4
LM358
simple booster, the heart of a 2
– C4
more complicated amplifier or 3
used as a guitar amplifier. C2 + 2200µF
IC LM383 must be installed on 470µF +
a heat sink. C3 is used for
Non-Inverting Input

Ground

+Ve Supply Voltage


R2
filtering and to prevent R1 Speaker
Inverting Input

Output

oscillation and should not be 220W


2.2W 4W
omitted. The circuit draws
about 850mA at 12v.
GND

You might also like