Scribd
Upload
62 views

Hexch Template

This document provides specifications for a corn oil feed preheater heat exchanger including process data for the hot and cold streams, performance details for a single unit, and construction details. Key details include exchanging 0.67 MMBtu/hr of heat between an HT effluent stream at 685°F and an oil feed stream at 79°F, a surface area of 483 ft2 per unit, and construction as a shell and tube exchanger with baffles and floating heads.

Uploaded by

jtirenti
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
62 views

Hexch Template

This document provides specifications for a corn oil feed preheater heat exchanger including process data for the hot and cold streams, performance details for a single unit, and construction details. Key details include exchanging 0.67 MMBtu/hr of heat between an HT effluent stream at 685°F and an oil feed stream at 79°F, a surface area of 483 ft2 per unit, and construction as a shell and tube exchanger with baffles and floating heads.

Uploaded by

jtirenti
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Heat Exchanger Specification Sheet

Company: Process Engineering Associates, LLC

Location:
Rev Note: Initial Process Data to Heat Exchange Design. Flows are from HMB Process Flow Stream Table with no design factor applied.
Service of Unit: Corn Oil Feed Preheater
Item No.: HTFdEffHtxr Ref JET
Date: 04/02/09 Rev Job 020908-C
Size ft Type S&T Connected in parallel series
Surf/unit(eff.) ft2 Shells/unit Surf/shell (eff.) ft2
PERFORMANCE OF ONE UNIT
Fluid allocation Note to Heat Exchanger Design
HOT COLD Normal Process Duty Required
Fluid name HT Effluent Oil Feed
Fluid quantity, Total lb/h 3,330 2,669 0.67 MMBtu/hr
Vapor (In/Out) lb/h 3,303 1,909
Liquid (In/Out) lb/h 27 1,422 2,669 2,669
Noncondensable lb/h

Temperature (In/Out) F 685 533 79 483


Dew / Bubble point F
Liquid Density lb/ft3 0.3 16.1 55.8 46.3
Vapor Density lb/ft3 0.499 0.339
Liquid Viscosity cP 0.776 0.29 67.56 1.70
Vapor Viscosity cP 0.016 0.015
Molecular wt, Vap 11 7
Molecular wt, NC
Liquid Specific heat Btu/lb F 0.01 0.32 0.46 0.77
Vapor Specific heat Btu/lb F
Liquid Thermal conductivity Btu/hr-ft2-F 0.083 0.060 0.098 0.093
Vapor Thermal conductivity
Latent heat Btu/lb 700 458 1,188 935
Pressure psig 542.07 541.1 587.6 582.6
Velocity ft/sec
Pressure drop, allow./calc. psig
Fouling resist. (min) hr-ft2-F/Btu 0.002 0.0010
Heat exchanged MMBtu/h 0.67 MTD corrected F
Transfer rate, Service Dirty Clean BTU/(h*ft2*F)
CONSTRUCTION OF ONE SHELL Sketch
Shell Side Tube Side
Design/Test pressure psig / /
Design temperature F
Number passes per shell
Corrosion allowance in
Connections In / /
Size/rating Out / /
in Intermediate / g /
Tube No. OD in Length ft Pitch in
Tube type Material Tube pattern
Shell ID OD in Shell cover
Channel or bonnet Channel cover
Tubesheet-stationary Tubesheet-floating
Floating head cover Impingement protection
Baffle-crossing Type Cut(%d) Spacing: c/c in
Baffle-long Seal type Inlet in
Supports-tube U-bend Type
Bypass seal Tube-tubesheet joint
Expansion joint Type
RhoV2-Inlet nozzle Bundle entrance Bundle exit lb/(ft*s2)
Gaskets - Shell side Tube Side
Floating head
Code requirements TEMA class
Weight/Shell Filled with water Bundle lb
Remarks

You might also like