Scribd
Upload
107 views

110 Patch Panel With A-Type Hardware Connecting Block - Wiring and Installation Instructions For Field Termination

110 Patch Panel with A-Type Hardware Connecting Block - Wiring and Installation Instructions for Field Termination. Refer to Instruction Sheet 848 017 422 for 110-type Connecting Block installation.

Uploaded by

hawk_282605
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
107 views

110 Patch Panel With A-Type Hardware Connecting Block - Wiring and Installation Instructions For Field Termination

110 Patch Panel with A-Type Hardware Connecting Block - Wiring and Installation Instructions for Field Termination. Refer to Instruction Sheet 848 017 422 for 110-type Connecting Block installation.

Uploaded by

hawk_282605
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

110 Patch Panel with A-Type Hardware Connecting Block –

Wiring and Installation Instructions for Field Termination

Step 1—Wiring and Installation Steps

Refer to instruction sheet 848 017 422 for 110-type connecting block installation.
1. Punch down conductors for each connecting block.
2. Fully seat connecting block (with grey strip down) on the wiring block index strip as shown in the
table. Make sure that all holes in connecting block have captured mating detents in wiring block
index strip.
3. When connecting block installation is completed, mark each designation strip insert as
appropriate and place in associated designation strip.
4. Attach the designation strips to the wiring block index strips.

Circuit Quantity of Connecting Blocks


Pair per Index Strip
Count 3-Pair 4-Pair 5-Pair
3 7 1* WIRING BLOCK (300 PR)
2 or 4 5 1*
1 or 5 5
Wiring Block
* Located at far right end of index strip (300 Pr)
Shown

Designation Strip Insert

Designation Strip

Connecting
Block (4 Pr)
Shown

Index
Strip

Connecting Grey Strip


Block (5 Pr) Down
Shown

Instruction Sheet 847252905 © 2010 CommScope, Inc. Page 1


Issue 8, April 2010 All rights reserved 2 Pages
CommScope Account

How to Contact Us

• To find out more about CommScope® solutions, visit us on the web at http://www.commscope.com/

• For customer support regarding CommScope products, contact your local account representative or call
1-800-544-1948 or (828) 459-5000.

Page 2 860252905
2 Pages Instruction Sheet

You might also like