Software Reuse

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 1

 Objectives

● To explain the benefits of software reuse and

some reuse problems
● To discuss several different ways to
implement software reuse
● To explain how reusable concepts can be
represented as patterns or embedded in
program generators
● To discuss COTS reuse
● To describe the development of software
product lines

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 2

 Topics covered

● The reuse landscape

● Design patterns
● Generator based reuse
● Application frameworks
● Application system reuse

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 3

 Software reuse

● In most engineering disciplines, systems are

designed by composing existing components
that have been used in other systems.
● Software engineering has been more focused
on original development but it is now
recognised that to achieve better software,
more quickly and at lower cost, we need to
adopt a design process that is based on
systematic software reuse.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 4

Reuse-based software engineering
● Application system reuse
• The whole of an application system may be reused
either by incorporating it without change into other
systems (COTS reuse) or by developing application
families.
● Component reuse
• Components of an application from sub-systems to
single objects may be reused. Covered in Chapter 19.
● Object and function reuse
• Software components that implement a single well-
defined object or function may be reused.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 5

 Reuse benefits 1

Increased dependability Reused software, that has been tried and tested in working systems,
should be m ore dependable than new software. The initial use of the
software reveals any design and implementation faults. These are then
fixed, thus reducing the number of failures when the software is reused.
Reduced process risk If software exists, there is less uncertainty in the costs of reusing that
software than in the costs of development. This is an important factor
for project management as it reduces the margin of error in project cost
estimation. This is particularly true when relatively large software
components such as sub-systems are reused.
Effective use of specialists Instead of application specialists doing the same work on different
projects, these specialists can develop reusable software that
encapsulate their knowledge.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 6

 Reuse benefits 2

Standards compliance Some standards, such as user interface standards, can be

implemented as a set of standard reusable components. For
example, if menus in a user interfaces are implemented using
reusable components, all applications present the same menu
formats to users. The use of standard user interfaces improves
dependability as users are less likely to make mistakes when
presented with a familiar interface.
Accelerated development Bringing a system to market as early as possible is o ften more
important than overall development costs. Reusing software can
speed up system production because both development and
validation time should be reduced.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 7

 Reuse problems 1

Increased maintenance If the source code of a reused software system or component is n ot

costs available then maintenance costs may be increased as the reused
elements of the system may become increasingly incompatible with
system changes.
Lack of tool support CASE toolsets may not support development with reuse. It may be
difficult or impossible to integrate these tools with a component
library system. The software process assumed by these tools may not
take reuse into account.
Not-invented-here Some software engineers sometimes prefer to re-write components as
syndrome they believe that they can improve on the reusable component. This is
partly to do with trust and partly to do with the fact that writing
original software is s een as more challenging than reusing other
people’s software.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 8

 Reuse problems 2

Creating and maintaining a Populating a reusable component library and ensuring the software
component library developers can use this library can be expensive. Our current techniques
for classifying, cataloguing and retrieving software components are
immature.
Finding, understanding and Software components have to be discovered in a library, understood and,
adapting reusable components sometimes, adapted to work in a n ew environment. Engineers must be
reasonably confident of finding a component in the library before they will
make routinely include a component search as part of their normal
development process.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 9

 The reuse landscape

● Although reuse is often simply thought of as

the reuse of system components, there are
many different approaches to reuse that may
be used.
● Reuse is possible at a range of levels from
simple functions to complete application
systems.
● The reuse landscape covers the range of
possible reuse techniques.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 10

 The reuse landscape

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 11

 Reuse approaches 1

Design patterns Generic abstractions that occur across applications are

represented as design patterns that show abstract and concrete
objects and interactions.
Component-based Systems are developed by integrating components
development (collections of objects) that conform to component-model
standards. This is covered in Chapter 19.
Application Collections of abstract and concrete classes that can be
frameworks adapted and extended to create application systems.
Legacy system Legacy systems (see Chapter 2) that can be ‘wrapped’ by
wrapping defining a set of interfaces and providing access to these
legacy systems through these interfaces.
Service-oriented Systems are developed by linking shared services that may be
systems externally provided.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 12

 Reuse approaches 2

Application product An application type is generalised around a common

lines architecture so that it can be adapted in different ways for
different customers.
COTS integration Systems are developed by integrating existing application
systems.
Configurable vertical A generic system is designed so that it can be configured to
applications the needs of specific system customers.
Program libraries Class and function libraries implementing commonly-used
abstractions are available for reuse.
Program generators A generator system embeds knowledge of a particular types
of application and can generate systems or system fragments
in that domain.
Aspect-oriented Shared components are woven into an application at different
software development places when the program is compiled.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 13

 Reuse planning factors

● The development schedule for the software.

● The expected software lifetime.
● The background, skills and experience of the
development team.
● The criticality of the software and its non-
functional requirements.
● The application domain.
● The execution platform for the software.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 14

 Concept reuse
● When you reuse program or design components,
you have to follow the design decisions made by
the original developer of the component.
● This may limit the opportunities for reuse.
● However, a more abstract form of reuse is concept
reuse when a particular approach is described in
an implementation independent way and an
implementation is then developed.
● The two main approaches to concept reuse are:
• Design patterns;
• Generative programming.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 15

 Design patterns

● A design pattern is a way of reusing abstract

knowledge about a problem and its solution.
● A pattern is a description of the problem and
the essence of its solution.
● It should be sufficiently abstract to be reused
in different settings.
● Patterns often rely on object characteristics
such as inheritance and polymorphism.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 16

 Pattern elements

● Name
• A meaningful pattern identifier.
● Problem description.
● Solution description.
• Not a concrete design but a template for a design
solution that can be instantiated in different ways.
● Consequences
• The results and trade-offs of applying the pattern.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 17

 Multiple displays

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 18

 The Observer pattern
● Name
• Observer.
● Description
• Separates the display of object state from the object itself.
● Problem description
• Used when multiple displays of state are needed.
● Solution description
• See slide with UML description.
● Consequences
• Optimisations to enhance display performance are
impractical.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 19

 The Observer pattern

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 20

 Generator-based reuse
● Program generators involve the reuse of
standard patterns and algorithms.
● These are embedded in the generator and
parameterised by user commands. A program
is then automatically generated.
● Generator-based reuse is possible when
domain abstractions and their mapping to
executable code can be identified.
● A domain specific language is used to
compose and control these abstractions.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 21

 Types of program generator
● Types of program generator
• Application generators for business data processing;
• Parser and lexical analyser generators for language
processing;
• Code generators in CASE tools.
● Generator-based reuse is very cost-effective but its
applicability is limited to a relatively small number of
application domains.
● It is easier for end-users to develop programs using
generators compared to other component-based
approaches to reuse.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 22

 Reuse through program generation

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 23

 Aspect-oriented development
● Aspect-oriented development addresses a major
software engineering problem - the separation of
concerns.
● Concerns are often not simply associated with
application functionality but are cross-cutting - e.g. all
components may monitor their own operation, all
components may have to maintain security, etc.
● Cross-cutting concerns are implemented as aspects
and are dynamically woven into a program. The
concern code is reuse and the new system is
generated by the aspect weaver.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 24

 Aspect-oriented development

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 25

 Application frameworks

● Frameworks are a sub-system design made

up of a collection of abstract and concrete
classes and the interfaces between them.
● The sub-system is implemented by adding
components to fill in parts of the design and by
instantiating the abstract classes in the
framework.
● Frameworks are moderately large entities that
can be reused.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 26

 Framework classes
● System infrastructure frameworks
• Support the development of system infrastructures
such as communications, user interfaces and
compilers.
● Middleware integration frameworks
• Standards and classes that support component
communication and information exchange.
● Enterprise application frameworks
• Support the development of specific types of
application such as telecommunications or
financial systems.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 27

 Extending frameworks
● Frameworks are generic and are extended to create a
more specific application or sub-system.
● Extending the framework involves
• Adding concrete classes that inherit operations from
abstract classes in the framework;
• Adding methods that are called in response to events
that are recognised by the framework.
● Problem with frameworks is their complexity which
means that it takes a long time to use them effectively.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 28

 Model-view controller

● System infrastructure framework for GUI

design.
● Allows for multiple presentations of an object
and separate interactions with these
presentations.
● MVC framework involves the instantiation of a
number of patterns (as discussed earlier under
concept reuse).

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 29

 Model-view-controller

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 30

 Application system reuse

● Involves the reuse of entire application

systems either by configuring a system
for an environment or by integrating
two or more systems to create a new
application.
● Two approaches covered here:
• COTS product integration;
• Product line development.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 31

 COTS product reuse

● COTS - Commercial Off-The-Shelf systems.

● COTS systems are usually complete
application systems that offer an API
(Application Programming Interface).
● Building large systems by integrating COTS
systems is now a viable development
strategy for some types of system such as E-
commerce systems.
● The key benefit is faster application
development and, usually, lower
development costs.
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 32
 COTS design choices
● Which COTS products offer the most appropriate
functionality?
• There may be several similar products that may be
used.
● How will data be exchanged?
• Individual products use their own data structures and
formats.
● What features of the product will actually be used?
• Most products have more functionality than is needed.
You should try to deny access to unused functionality.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 33

 E-procurement system

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 34

 COTS products reused

● On the client, standard e-mail and web

browsing programs are used.
● On the server, an e-commerce platform has to
be integrated with an existing ordering system.
• This involves writing an adaptor so that they can
exchange data.
• An e-mail system is also integrated to generate e-
mail for clients. This also requires an adaptor to
receive data from the ordering and invoicing
system.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 35

COTS system integration problems
● Lack of control over functionality and performance
• COTS systems may be less effective than they appear
● Problems with COTS system inter-operability
• Different COTS systems may make different
assumptions that means integration is difficult
● No control over system evolution
• COTS vendors not system users control evolution
● Support from COTS vendors
• COTS vendors may not offer support over the lifetime
of the product

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 36

 Software product lines
● Software product lines or application families are
applications with generic functionality that can be
adapted and configured for use in a specific
context.
● Adaptation may involve:
• Component and system configuration;
• Adding new components to the system;
• Selecting from a library of existing components;
• Modifying components to meet new requirements.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 37

 COTS product specialisation
● Platform specialisation
• Different versions of the application are developed for
different platforms.
● Environment specialisation
• Different versions of the application are created to
handle different operating environments e.g. different
types of communication equipment.
● Functional specialisation
• Different versions of the application are created for
customers with different requirements.
● Process specialisation
• Different versions of the application are created to
support different business processes.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 38

 COTS configuration

● Deployment time configuration

• A generic system is configured by embedding
knowledge of the customer’s requirements and
business processes. The software itself is not
changed.
● Design time configuration
• A common generic code is adapted and changed
according to the requirements of particular
customers.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 39

 ERP system organisation

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 40

 ERP systems
● An Enterprise Resource Planning (ERP)
system is a generic system that supports
common business processes such as ordering
and invoicing, manufacturing, etc.
● These are very widely used in large
companies - they represent probably the most
common form of software reuse.
● The generic core is adapted by including
modules and by incorporating knowledge of
business processes and rules.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 41

 Design time configuration

● Software product lines that are configured at

design time are instantiations of generic
application architectures as discussed in
Chapter 13.
● Generic products usually emerge after
experience with specific products.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 42

 Product line architectures

● Architectures must be structured in such a way

to separate different sub-systems and to allow
them to be modified.
● The architecture should also separate entities
and their descriptions and the higher levels in
the system access entities through
descriptions rather than directly.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 43

 A resource management system

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 44

 Vehicle despatching
● A specialised resource management system where the aim
is to allocate resources (vehicles) to handle incidents.
● Adaptations include:
• At the UI level, there are components for operator display
and communications;
• At the I/O management level, there are components that
handle authentication, reporting and route planning;
• At the resource management level, there are components for
vehicle location and despatch, managing vehicle status and
incident logging;
• The database includes equipment, vehicle and map
databases.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 45

 A despatching system

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 46

 Product instance development

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 47

 Product instance development
● Elicit stakeholder requirements
• Use existing family member as a prototype
● Choose closest-fit family member
• Find the family member that best meets the
requirements
● Re-negotiate requirements
• Adapt requirements as necessary to capabilities of the
software
● Adapt existing system
• Develop new modules and make changes for family
member
● Deliver new family member
• Document key features for further member
development
©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 48
 Key points
● Advantages of reuse are lower costs, faster software
development and lower risks.
● Design patterns are high-level abstractions that
document successful design solutions.
● Program generators are also concerned with software
reuse - the reusable concepts are embedded in a
generator system.
● Application frameworks are collections of concrete and
abstract objects that are designed for reuse through
specialisation.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 49

 Key points
● COTS product reuse is concerned with the reuse of
large, off-the-shelf systems.
● Problems with COTS reuse include lack of control over
functionality, performance, and evolution and problems
with inter-operation.
● ERP systems are created by configuring a generic
system with information about a customer’s business.
● Software product lines are related applications
developed around a common core of shared
functionality.

©Ian Sommerville 2004 Software Engineering, 7th edition. Chapter 18 Slide 50