Scribd
Upload
838 views1 page

Hydrological Analysis PDF

This document discusses approaches for estimating maximum design discharge and peak river discharge for bridge design when streamflow data is unavailable. It explains that synthetic rainfall data will be used along with frequency analysis of 24-hour maximum rainfall observations from nearby stations. Several methods are listed for estimating discharge, including the DHM/WECS method, regional flood frequency analysis, slope area method, rational formula, and empirical formulas like Dicken's, Ryve's, Dredge of Burge, and BD Richardson methods. The selection of methods will consider available data and the hilly catchment site conditions.

Uploaded by

Suman Nakarmi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
838 views1 page

Hydrological Analysis PDF

This document discusses approaches for estimating maximum design discharge and peak river discharge for bridge design when streamflow data is unavailable. It explains that synthetic rainfall data will be used along with frequency analysis of 24-hour maximum rainfall observations from nearby stations. Several methods are listed for estimating discharge, including the DHM/WECS method, regional flood frequency analysis, slope area method, rational formula, and empirical formulas like Dicken's, Ryve's, Dredge of Burge, and BD Richardson methods. The selection of methods will consider available data and the hilly catchment site conditions.

Uploaded by

Suman Nakarmi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

1.

2 STUDY APPROACH
Although the rainfall measuring stations in Nepal are established nearly during sixties the rainfall
data is not continuously available. Since short period of the data will not provide the better result
for the frequency analysis, which requires minimum 30 years data. Hence, to solve the problem
the synthetic rainfall data of as much as provided years is used to prepared as shown in table 31.
1.3 MAXIMUM DESIGN DISCHARGE
Maximum design discharge is the peak river discharge that corresponds to a certain return
period, which is usually taken as 100 years for the design of the bridge. It (Qmax) is used to
determine the high flood level, on average once every (T) year, where T is the selected return
period of the discharge. The Qmax determines level of the water at high flood condition and the
corresponding area that is submerged in order to mitigate the bridge from the possible
outflanking.
Since the River has not been gauged at the proposed bridge site peak discharge is to be
estimated from rainfall and runoff relationships. The annual maximum daily rainfall values of the
relevant station are to be collected and 24 hours maximum rainfall for 100 years returns periods
are to be calculated by frequency analysis. The observed 24 hr maximum rainfall of relevant
stations is shown in table above. Discharge is to be estimated by using various approaches
such as, WECS, Modified Dickens, B.D. Richards, Snyders method and flood frequency
method as described below. The summary of hydrological calculation and catchment
parameters is also tabulated below.
There are several methods in use to estimate the peak discharge of the rivers. Considering the
availability of the data and the site condition (hilly catchments) the following methodologies are
used for the further investigation.
1.
2.
3.
4.
5.

DHM/WECS method
Regional flood frequency analysis
Slope area method
Rational formula
Emperical formulas
a) Dicken's formula
b) Ryve's formula
c) Dredge of Burge formula
d) BD Rechardson method

You might also like