Respirationlabwriteup
Respirationlabwriteup
Period 1
10-07-15
Cellular Respiration Lab
Introduction
The intended problem and goal of the experiment is to collect data on
the respiration rate of germinating and non germinating mung beans. In
order to do this, a control of solely glass beads will also be used to
determine the rate. The respirometers will be placed in room temperature
water to buffer temperature change. If temperature change was to occur, a
rise would create a higher rate and a decrease would cause a lower rate. If
the water is too hot, i.e. boiling water, the peas would eventually die. The
hypothesis of the experiment is that the germinating mung beans will have
a greater respiration rate than the non germinating mung beans.
Glass Beads
Absorbent Cotton
Non-Absorbent Cotton
Respirometer
Plastic Container
Tape
Water
KOH (Potassium Hydroxide)
Thermometer
Germinating Mung Beans
Non-Germinating Mung Beans
Methods:
1. Get glass vial.
2. Insert absorbent cotton.
3. Saturate cotton with Potassium Hydroxide.
4. Next, insert Non-Absorbent Cotton on top of KOH
saturated cotton.
Calculations:
(For Figures 1-3)
Change in Fluid Position = Previous Fluid Position - New Fluid Position