Scribd
Upload
48 views3 pages

Cse-H53N: (Ipv6 Based Rs232 Ethernet Converter)

CSE-H53N is a serial to Ethernet converter that supports both IPv4 and IPv6 networking protocols. It has an RS232 serial interface, operates in an industrial temperature range of -40°C to +85°C, and supports various communication functions such as debugging, DNS, DDNS, and Telnet port control. It can be used in different communication environments to connect serial devices like credit card scanners to an IP network through Ethernet.

Uploaded by

Ariel Hernàn Cochia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
48 views3 pages

Cse-H53N: (Ipv6 Based Rs232 Ethernet Converter)

CSE-H53N is a serial to Ethernet converter that supports both IPv4 and IPv6 networking protocols. It has an RS232 serial interface, operates in an industrial temperature range of -40°C to +85°C, and supports various communication functions such as debugging, DNS, DDNS, and Telnet port control. It can be used in different communication environments to connect serial devices like credit card scanners to an IP network through Ethernet.

Uploaded by

Ariel Hernàn Cochia
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

CSE-H53N

(IPv6 based RS232 Ethernet Converter)

CSE-H53N is a Serial to Ethernet converter that supports IPv6 addressing architecture as well as IPv4. It features RS232
interface and industrial temperature range of -40 to +85. As CSE-H53N has a lot of communication functions such as
debugging, DNS, DDNS, Telnet COM Port Control Option and etc., it can be applied in various communication environments.

IPv4 / IPv6 dual stack


Stateless / Stateful (DHCPv6) address auto-configuration
IPv6 fragmentation

EXTERNAL

ICMPv6, TCPv6, UDPv6


Ethernet 10Base-T or 100Base-TX (Auto-Sensing)
RS232 (D-sub 9pin Male, speed up to 230.4Kbps)
Industrial temperature range (-40 ~+85)
Variety of monitoring status (ezManager, TELNET)
Separator settings for packet fragmentation

Application

Router

Hub

Main Server

Internet
Data
RS232
Credit Card Scanner

SOLLAE SYSTEMS

Ethernet
ADSL/Cable Modem

E-mail : [email protected] www.ezTCP.com

Serial Physical Interface


Serial Interface

RS232
RXD, TXD, GND, RTS, CTS

Connector

9 pin D-sub male

Baudrate
Data Bits
Parity
Stop Bit

1,200bps ~ 230,400bps

Serial Port Properties

8 bits
None, Even, Odd, Mark, Space
1, 1.5, 2

Network Physical Interface

10Base-T/100Base-TX Ethernet (RJ45)

Network Interface

Ethernet Speed Auto Sense


1:1 or Cross-over Cable Auto Sense

Software Functions
IPv4/IPv6 dual stack, ICMPv6/TCPv6/UDPv6, TELNET

Protocols

TCP, UDP, IP, ICMP, ARP / DHCP, PPPoE, DNS, DDNS


Telnet COM Port Control Option (RFC 2217)
SSL (Secure Socket Layer)

Security

IP & MAC filtering - Restrict host or network


Password for Configuring
TCP Server (T2S)

Communication Mode

TCP Client (COD)


TCP Server/Client with AT command (ATC) - Patent
UDP Mode (U2S)
Separator settings for packet fragmentation

Additional Functions

TCP Server/Client mode


Sending MAC address Option

Indicators (LEDs)

Power
Status
Ethernet Link
Ethernet RXD
Ethernet TXD
Serial RXD
Serial TXD

Red

ezManager
Telnet
AT Command

Configuration and Monitoring Tool through Ethernet

SOLLAE SYSTEMS

Yellow
Green
Yellow
Green
Yellow
Green

Management

Telnet Login
Configuring in ATC mode - Patent

E-mail : [email protected]

www.ezTCP.com

Dimension
Size

89.0mm x 57.0mm x 24.0mm

Operating Environment

Input Voltage
Current Consumption
Operating Temperature
Storage Temperature

DC 5V 0.5V
200mA typical
-40 ~ +85
-40 ~ +85

Internet
Ethernet

RS232

TCP/IP
Serial Device

Hub
Ethernet
TCP/IP

Client

Server

RS232

RS232

TCP Client Mode

LAN

TCP Server Mode

LAN

SOLLAE SYSTEMS

E-mail : [email protected]

www.ezTCP.com

You might also like