Scribd
Upload
26 views

Design of Pilecap For Pc-2

The document provides design details for the pile cap of structure PC-2. It specifies loads, dimensions, reinforcement requirements due to bending and shear, and self-weight calculations. The pile cap is 3.3m long, 2.25m wide, and 1.4m deep, supporting 5 piles each loaded with 100 tonnes. Reinforcement of 28cm2/m is required along the X-X axis due to bending. Along the Y-Y axis, no reinforcement is needed. Shear requirements are also not governing. Self-weight calculations show no load.

Uploaded by

bhavesh
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
26 views

Design of Pilecap For Pc-2

The document provides design details for the pile cap of structure PC-2. It specifies loads, dimensions, reinforcement requirements due to bending and shear, and self-weight calculations. The pile cap is 3.3m long, 2.25m wide, and 1.4m deep, supporting 5 piles each loaded with 100 tonnes. Reinforcement of 28cm2/m is required along the X-X axis due to bending. Along the Y-Y axis, no reinforcement is needed. Shear requirements are also not governing. Self-weight calculations show no load.

Uploaded by

bhavesh
Copyright
© © All Rights Reserved
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 6

DESIGN OF PILECAP FOR PC-2

Load on one pile:


No. of piles:
Length of pile cap:
Width of pile cap:
Depth of pilecap:
(effective)

100
5
3.3
2.25
1400

tonnes
m
m
mm

Area of steel from Bending moment criteria


Bending moment considered along X-X:
Total number of piles contributing to Bending moment:

Piles along
Length
L1,L2,L3
Row 1
L1:
0.725
m
2
Row 2
L2:
0
m
0
Row 3
L3:
0
m
0
L1,L2 and L3 is te distance column face to centre of pile row

Bending moment at the face of column (X-X)

Bending moment per m width

Mu / bd2
Percentage of steel from SP16 for M25 concrete

Area of steel

145

t-m

64.44444

t-m/m

0.493197

0.2

28

cm2/m

Bending moment considered along Y-Y:


Total number of piles contributing to Bending moment:

Length
L4:
L5:
L6:

0
0
0

m
m
m

Piles along
L4,L5,L6
0
0
0

Bending moment at the face of column (Y-Y)

Bending moment per m width

Mu / bd2

t-m

t-m/m

Percentage of steel from SP16 for M30 concrete

Area of steel

0.185

25.9

cm2/m

Area of steel from shear consideration:

The critical section for shear is at d/2 from the face of column:
Shear considered at d/2 from face X-X:
Total number of piles contributing to shear
Shear force

70

Shear force per m width

31.11111

tonnes / m

Tv

0.333333

N/mm2

Vu / bd

tonnes

Pt

Ast

cm2/m

SHEAR NOT GUIDING

Shear considered at d/2 from face Y-Y:


Total number of piles contributing to shear
Shear force

tonnes

Shear force per m width

tonnes / m

Tv

N/mm2

Vu / bd

IF SHEAR REINFORCEMENT IS REQUIRED:


Percentage of steel Longitudinal provided:
Inherent Shear capacity for percentage of steel provided from SP16 or IS 456 (Tc):
If Tv >Tc,

Force to be resisted by stirrups Vus :


Vus/d :

0.2

0.34

N/mm2

-476

KN/m

-3.4

kN/cm/m

NX
(m)
0

NY
(m)
0

DEPTH OF SELF
PILECAP(mWEIGHT (T)
0
0

NX
(m)
0

NY
(m)
0

DEPTH OF SELF
PILECAP(mWEIGHT (T)
0
0

kN/cm/m

You might also like