GIVE AWAY RIGHTS
This guide is a FREE guide. You are allowed to
distribute this guide to your subscribers and network,
as long as the contents of this guide remain unaltered
in anyway, anyhow and at anytime.
Copyright Kiddyhub.com
Making Your Own Flying Paper Butterfly
http://web.singnet.com.sg/~csqf2828/
1) What you will need?
- Paper Wing Cut-out
- Metal Wire
- Hollow plastic tube
(cut out from
balloon stick)
- Rubber band
- Plastic Bead
2) Bend the metal wire
into a V shape
3) Hook the rubber band
onto the metal wire.
4) Insert the metal wire
together with the rubber
band into the plastic
hollow tube.
5) Pull the metal wire and
ensure the rubber band is
stretch with the knot
sitting securely at the
other end of the hollow
tube.
6) Insert the rubber bead
into the metal wire.
7) Pull the rubber band by
holding the metal wire
and the tubing. Ensure
the rubber band is stretch
and there is some tension.
Then bend the metal wire
down.
8) The shape of the metal
wire should look like the
picture on the right.
9) Cut out the paper wing
and folds the edges.
10) Bend the ends of the
wire to form a hook with
a pair of pliers.
11) Glue the paper wings
to the wire.
12) It should look like the
picture on the right.
13) Stick the remaining
paper wing to the hollow
tube with adhesive tape.
The paper butterfly
should look something on
the right.
14) Apply some
lubrication between the
bead and the hollow tube
as shown on the right.
15) Test flight the paper
butterfly by rotating the
wing for may be 30 50
rounds depending on the
type of rubber band you
have used.
Visit our other websites:
(click to access the websites)
1) Complete guide to Beadings for Beginners
2) 365 Easy Step by Step Kids Craft
3) How to make easy craft projects?
4) Subscribe to Art Magazine
