Scribd
Upload
322 views

Morse Code Practice Oscillator

Morse Code Practice Oscillator by Tony van Roon with NE555

Uploaded by

rik206
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
322 views

Morse Code Practice Oscillator

Morse Code Practice Oscillator by Tony van Roon with NE555

Uploaded by

rik206
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Morse Code Practice Oscillator

1 de 1

http://www.sentex.ca/~mec1995/circ/morse1.htm

Morse Code Practice Oscillator


by Tony van Roon

Parts
R1 =
R2 =
P1 =
C1 =
C2 =
C3 =

List
3K3
15K
500 ohm
0.047uf (47nF)
0.01uF (10nF)
4.7uF/16v

IC1 = 555 Timer IC


S1 = Morse Keyer
LS = Loudspeaker, 8 ohm

Additional Notes:
The speaker (LS) can be any 8-ohm type up to 2-watts. C1 and C2 are ceramic capacitors. C3 is an
electrolytic type.
IC1 is a CMOS MC1455P or equivalent. The cmos type consumes a lot less current when used with the 9-volt
battery, but if you don't want to spent the money then the LM555, NE555, etc. are fine too and are
pin-for-pin compatible with each other.
And obviously, S1 is your Morse-keyer. To get a more precise duty-cycle replace the components within the
shaded gray area from Fig. 1 with the ones in Fig. 2. The diode can be 1N4148 or equivalent. The zenerdiode
is between 5.2 and 5.8 volt. Ra and Rb are experimental to suit your personal taste. C is about the same.
Back to Circuits page
Copyright Tony van Roon

27/01/2016 19:08

You might also like