Scribd
Upload
82 views2 pages

MOTORTECH Technical Data Sheet OLC 01.63.001 EN 2014 06 PDF

This document provides technical specifications for an oil level controller including its dimensions, material composition, electrical data, and temperature and pressure limits. The controller is 210mm long by 120mm wide and has a sight glass range of 165mm. It has G3/8" and G1/2" connections and is made from materials like aluminum and stainless steel that provide corrosion resistance in various environments. It can operate at temperatures up to 90-125°C and withstand pressures up to 2.5 bar.

Uploaded by

sudipta_kol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
82 views2 pages

MOTORTECH Technical Data Sheet OLC 01.63.001 EN 2014 06 PDF

This document provides technical specifications for an oil level controller including its dimensions, material composition, electrical data, and temperature and pressure limits. The controller is 210mm long by 120mm wide and has a sight glass range of 165mm. It has G3/8" and G1/2" connections and is made from materials like aluminum and stainless steel that provide corrosion resistance in various environments. It can operate at temperatures up to 90-125°C and withstand pressures up to 2.5 bar.

Uploaded by

sudipta_kol
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Technical Data Sheet

Oil Level Controller


P/N 80.01.21X-XXXX-XX

Dimensions
length

210 mm (8.27")

total length (incl. wiring, approx.)

270 mm (10.63")

width

120 mm (4.72")

volume

480 cm (29.29 in)

weight (incl. 3 float switches, 1.0 m (3.28') lead length)

1.6 kg (3.53 lbs)

distance of mounting (horizontal)

100 mm (3.94")

adjustment range (vertical)

30 mm (1.18")

installation position, from the vertical (permanent/short term)

10/25

sight glass range (standard)

165 mm (6.50")

Connections
balancing connections (top/rear side)*

G 3/8"

oil connections (bottom/rear side)*

G 1/2"

* Metric or NPT threads optionally available

Material
housing

G-Al Si7 Mg 0.3

front panel

Al Mg 3

bolts

1.4403/ANSI 304

sight glass (standard/optionally)

polycarbonat/borosilicate glass

gasket front panel (standard/optionally)

NBR (Perbunan)/FKM (Viton)

clamps srew connections and plugs

Ms nickel-plated

guide tubes float switches

1.4571/ANSI 316Ti- 8 mm (0.31")

lead (standard/optionally)

PVC/silicone

lead cross section

2x0.75 mm (2x0.001 in)

lead (standard/optionally)

1 m/4 m (3.28'/13.12')

Corrosion Resistance
to atmospheric conditions

excellent

to seawater

very good

Permissible Temperatures
internal, oil (gasket front panel NBR/FKM)

90 C/125 C (194 F/257 F)

external (PVC-/silicone leads)

80 C/120 C (176 F/248 F)

Permissible Pressures
maximum internal pressure

2.5 bar (36.26 psi)

maximum test presure

3.5 bar (50.76 psi)

Electrical Data
maximum voltage AC/DC

60 V

maximum switching current

50 mA

maximum switching capacity

1.2 W

resistance (in series with reed contact)

47

switching hysteresis

3 to 4 mm (0.11" to 0.16")

protection class

IP 65

P/N 01.63.001-EN | Rev. 06/2014

Overview Drawings

MOTORTECH GmbH | Hogrevestr. 21-23 | 29223 Celle | Germany | Phone: +49 5141 93 99 0 | Fax: +49 5141 93 99 99 | www.motortech.de
MOTORTECH Americas, LLC | 1400 Dealers Avenue | New Orleans | LA 70123 | Phone: +1 504 355 4212 | Fax: +1 504 355 4217 | www.motortechamericas.com

P/N 01.63.001-EN | Rev. 06/2014

You might also like