Scribd
Upload
25 views1 page

Luas Terminus, Dublin: King Post Wall

This project involved constructing a King Post Wall for a Luas (tram) terminus near an existing tramway in Dublin. Holes were bored 400mm in diameter into the granite bedrock and partially filled with concrete before steel columns were inserted to allow the main contractor, Siac Construction, to excavate and install precast concrete panels and a new water main to support a deep excavation.

Uploaded by

Mrinal Agarwal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
25 views1 page

Luas Terminus, Dublin: King Post Wall

This project involved constructing a King Post Wall for a Luas (tram) terminus near an existing tramway in Dublin. Holes were bored 400mm in diameter into the granite bedrock and partially filled with concrete before steel columns were inserted to allow the main contractor, Siac Construction, to excavate and install precast concrete panels and a new water main to support a deep excavation.

Uploaded by

Mrinal Agarwal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

LUAS TERMINUS, DUBLIN

KING POST WALL

Title: Luas Terminus, Dublin

Description:

Contractor: Siac Construction

This project involved the construction of a


King Post Wall for a Luas Terminus in close
proximity to the Luas tramway.
Holes were bored in the granite bedrock at
400mm diameter. The hole was then part
filled with concrete and a steel column was
set in place to allow the main contractor,
Siac Construction, to excavate and place in
precast concrete panels to support a deep
excavation and install a new water main.

You might also like