Scribd
Upload
207 views

DLINK Router Port Forwarding Setup For Vivotek IP Camera

This document provides instructions for setting up port forwarding on a DLink router to allow remote access to a Vivotek IP camera. The steps are to log into the router at its default gateway IP, go to the port forwarding section in the advanced settings, and create a new port forwarding rule with the camera's IP address and ports 80-80 to enable remote access to the camera over the internet at all times.

Uploaded by

santhosh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
207 views

DLINK Router Port Forwarding Setup For Vivotek IP Camera

This document provides instructions for setting up port forwarding on a DLink router to allow remote access to a Vivotek IP camera. The steps are to log into the router at its default gateway IP, go to the port forwarding section in the advanced settings, and create a new port forwarding rule with the camera's IP address and ports 80-80 to enable remote access to the camera over the internet at all times.

Uploaded by

santhosh
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

DLINK Router Port Forwarding Setup for Vivotek IP Camera

1. Log into your DLink Router by typing the following gateway into a web browser
http://192.168.0.1 [By default Username: admin and Password: password]

2. Click "Advanced" > "Port Forwarding"

3. Now in one of the empty Application Fields fill in the below info.
Name: Vivotek 1
IP Address: IP Address of the Vivotek Camera
Port Start: 80
Port End: 80
Traffic Type: Any
Schedule: Always
Make sure the Enable Box is checked to the left of the rule.
4. Click the "Save Setting" button.

You might also like