Scribd
Upload
38 views

Slab

This document provides details for designing a two-way slab panel with a short span of 3.351 m and long span of 3.743 m. It includes dimensions, load calculations, steel requirements, and checks for deflection and shear. The slab has a 20 MPa concrete strength and 8 mm diameter reinforcing bars. Calculations show the required area of steel is met with 8 bars spaced at 150 mm for the short span and 175 mm for the long span. Checks for deflection and shear are also satisfied.

Uploaded by

laxmi sunder libi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
38 views

Slab

This document provides details for designing a two-way slab panel with a short span of 3.351 m and long span of 3.743 m. It includes dimensions, load calculations, steel requirements, and checks for deflection and shear. The slab has a 20 MPa concrete strength and 8 mm diameter reinforcing bars. Calculations show the required area of steel is met with 8 bars spaced at 150 mm for the short span and 175 mm for the long span. Checks for deflection and shear are also satisfied.

Uploaded by

laxmi sunder libi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Two way slab design

slab panel
Fck
20
50
Fy
0
Dimensioning of slab
c/c length short span=
c/c length long span=
clear short span(Lx)=
clear long span(Ly)=
width of supporting beam=
clear cover=
providing 8 mm dia bars=
assumed depth(D)=
effective depth(dx)=
effective depth(dy)=
effective short span(lx)=
effective long
span(ly)=

100
81
73
3.351

mm
mm
mm
m

1.117

load calculation
dead load of slab=
floor finish=
partition wall load=
live load=
total load=
factored load=

Table 26 IS 456:2000
negative at
support
positive at mid span

m
m
m
m
mm
mm
mm

3.743 m

ly/lx=

Support condition

3.5
3.9
3.27
3.67
230
15
8

>2, hence two way slab

2.5
1
1
2
6.5
9.75
Two adjacent sides discontinious
short span
coefficient
long span coefficient
x
x

0.0542
0.0408

y
y

0.047
0.035

Calculation of area of steel

For short span


at support

Moment

Ast req

min Ast

5.93

178.27

120

spacing
req
282

spacing
pro
150

Ast pro
335.10

at mid span
For long span
at support
at mid span

4.47

148.46

120

339

150

335.10

5.15
3.83

153.38
126.19

120
120

328
398

175
175

287.23
287.23

provide 8 dia bars at 6 inch c/c for short span


provide 8 dia bars at 7 inch c/c for short span

Check for deflection


% of steel (Pt)=
0.34
Fs=
154.28
from fig 4 of IS 456:2000
modification factor=
2
basic L/d ratio =
26
L/d allowable=
52
L/d provided=
41.37 OK
Shear check
shear force at the face of the support,
V=
16.34 kN
nominal shear stress =
0.20 N/mm2
% of steel=
0.34
design shear strength for conc=
0.40 N/mm2

OK

You might also like