Scribd
Upload
229 views2 pages

MTC S355 PDF

Uploaded by

Rama Krishna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
229 views2 pages

MTC S355 PDF

Uploaded by

Rama Krishna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 2
srea.aumonnygrnoauures 36-R BHA STEEL PANT resehncl 8 coNTrOL as (MECHANICA, TESTING) Fr CaRTINSATEFOR me st moe owe rs SS ee | {[EVIEWED & ACCEPTED| oli ello hl ‘An ISO 9001 - 2008 Lab G-8, Turnkey Complex, C.LE. Balanagar, Hyderabad-500 037. Phone : 65226589 Fax : 040-40073032 E-mail : [email protected] Gains ar TEST REPORT Report No. OFS TAIZOTS ‘Date:03.02.2014 [Customer Name & Address :M/s.DRILLMEC INDIA (P) LTD, Kakinada [Customer RefNo. & Date Yr Mail Dt31.01.2014 ‘Specification 1$2062 E3500, BS EN 10025-2 S355J2+N Type of Test Tensile Test, Charpy "V" Notch Impact Test at -20°C, Hardness Test__| Identity of Sample [Plate 32mm Thk x 2500mm x 12500mm Heat No. 170507 ITC No - RCLMTL/PLM/80274826 hemical Composition in %. Cc | Mn i P |Cu o18 | 134 0.019 | 0.081 Mechanical Test Resul [Dia of test barmm Area, mm Initial Gauge Length,mm, Yield Load , N Maximum Load . N Final Gauge Length , mm Final Dia of test ar, mm. Yield Strength, Nimm? (Mpa) Tensile Strength, Nimm*(Mpa) Elongation RA Impact Test at -20°C Temperature [Specimen Size - 10x10x55mm_ Notch Type = "V" Impact Value in Joules 40, 44, 42 |Average impact Value in Joules 42.0 Hardness Test Hardness value in SHN 163, 163, 163 REMARKS: Test carried out as per BS EN 10025-1 & 2 : 2004 (E) Tensile test cared out as per EN 1002-1 Impact test carried out as per EN 10045-1 Hardnes test carried out as per EN 1003-1 Chemical Analysis carried out as per CR 10320 Note THis report (Sie only To Whe parler Sample) submited By customer [This Report cannot be reproduced, except i ful, unless written permission from Bharat Technical Labs [Witnessed by: REVIEWED & ACCEPTED| sionka, - Datetifenfity, Chemical, Mechanical, Metallurgical & Non Destructive Testing Services

You might also like