This document describes the fabrication of a motorized automatic door opening and closing system. An infrared sensor detects a person in front of the door and sends a signal to activate a 24V DC motor that opens the door using a leadscrew and nut mechanism connected to a sliding door. A 24V DC power supply provides power to the motor which is started using a switch and its rotation is converted to linear motion to open and close the door.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
0 ratings0% found this document useful (0 votes)
22 views2 pages
Abs123motorised Automatic Doorr
This document describes the fabrication of a motorized automatic door opening and closing system. An infrared sensor detects a person in front of the door and sends a signal to activate a 24V DC motor that opens the door using a leadscrew and nut mechanism connected to a sliding door. A 24V DC power supply provides power to the motor which is started using a switch and its rotation is converted to linear motion to open and close the door.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2
FABRICATION OF MOTORISED AUTOMATIC DOOR
OPENING AND CLOSING SYSTEM
SYNOPSIS This unit consists of DC Motor 24V DC, Power supply 24V DC, Leadscrew and nut mechanism, and a sliding door.
An Infrared sensor is placed in front of the door which gives the signal to the control system and hence the control system activates the motor to open the door.
Here one 24VDC Power Supply is used to supply the DC
power to the motor. Then press the start switch. The DC Motor starts rotating.
The rotary motion of the Motor shaft is converted into linear
motion of the door by the Leadscrew and nut mechanism. The door is connected to the sliding nut unit. . .